Loading...
Search for: alizadeh--mohammad-hossein
0.169 seconds

    H.264 Decoder for Portable Application

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Mohammad Sadegh (Author) ; Sharifkhani, Mohammad (Supervisor)
    Abstract
    As mobile multimedia services become popular, it is expected that mobile devices provide more multimedia functions such as real-time video playback, TV watching, and video games. However, real-time video applications running on mobile devices are heavily constrained by their limited computing power, compared to high-end consumer devices. In order to playback a high resolution video on mobile devices, a typical approach would be to fully decode video bitstream into the pixel-domain, and then spatially downscale the decoded frames at a desired resolution. However, due to large computation and memory required for decoding followed by downscaling, this approach is unsuitable for real-time video... 

    Experimental and Simulation Study of Water Alternating Hydrocarbon - CO2 Mixture Gas in one of Iranian Oil Reservoirs

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Ali (Author) ; Taghikhani, Vahid (Supervisor) ; Ghazanfari, Mohammad Hossein (Supervisor) ; Badakhshan, Amir (Supervisor)
    Abstract
    In this work the effect of composition changes of the injection gas (Hydrocarbon gas + carbon dioxide) on Water Alternating Gas (WAG) performance in immiscible flooding which has been rarely attended in the available literature is investigated. Core flood experiments are conducted on a 10 cm length Sarvak sandstone core sample at 46 degree C and at immiscible condition, i.e., below the minimum miscible pressure (MMP) of the oil sample using pure CO2 as injected Gas.The influence of injection WAG ratio on oil recovery also is investigated. Artificial injection brine which is made by dissolving NaCl into distilled water with 5000 ppm (mg/L), NaftShahr oil which has about 41 API gravity and... 

    Analyzing Community Evolution on Open Source Development Networks

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Hamid (Author) ; Khansari, Mohammad (Supervisor)
    Abstract
    Open source software development is growing rapidly according to request of market. Different types of analysis have done on open source development networks to extract knowledge and help both developers and users to decide better. In this thesis, we try to extract data from one of the biggest open source development repositories GitHub and then a community detection algorithm will apply on these data for different time stamps. Then we propose an evolution tracking model and implement it to detect evolution of communities from 2013 until 2015. Then communities size evolution and changes in communities such as growth, dissolve, merge, split and formation will be discussed. After that we... 

    Analysis and Design of Controller and User Interface of a 6DOF Stewart Platform-Based Hydraulic Motion Simulator for Heavy Payloads

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Hadi (Author) ; Durali, Mohammad (Supervisor)
    Abstract
    Motion simulators have been highly sought after by the growth of the aerospace industry. In the meantime, the Stewart mechanism, or the so-called Hexapads, is a robot that, in addition to being used in machining tools, is mainly used to simulate the flight. The Stewart-Gaph mechanism was created and introduced in 1954 and 1965, and since then dynamics and control have been widely addressed in the mechanical engineering literature. The robot is considering the project to test parts and equipment installed in marine vessels under sea movements and waves. Therefore, according to information obtained through relevant organs, the purpose of this project is to design and implement a hexapad... 

    HEVC Compressed Domain Computer Vision

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Mohammad Sadegh (Author) ; Sharifkhani, Mohammad (Supervisor)
    Abstract
    In the first section, a novel No-Reference Video Quality Assessment (NR-VQA) method, based on Convolutional Neural Network (CNN) for High Efficiency Video Codec (HEVC) is presented. Deep Compressed-domain Video Quality (DCVQ) measures the video quality, with compressed domain features such as motion vector, bit allocation, partitioning and quantization parameter. For the training of the network, normalized PSNR is used due to the limitation of existing datasets. The evaluation of the proposed method shows that it has”96%” correlation to subjective quality assessment (MOS). The method can work simultaneously with the decoding process and measures the quality each frame in the different... 

    Ideological Orientations in TOEFL iBT: A Critical Language Testing Perspective Masked Agendas!

    , M.Sc. Thesis Sharif University of Technology Reza Alizadeh, Mohsen (Author) ; Salehi, Mohammad (Supervisor)
    Abstract
    It is generally believed that the only utility of tests as a critical instrument is to be at the service of educational institutions. To broadly consider their different usefulness, tests can serve other purposes like focusing on the ethical and moral issues. As it is called Critical Language Testing, tests are not reliable instruments and they have the capacity of being used not only in educational, but also in political contexts. This philosophy has not been brought into perspective, and, as a result, the literature deserves more comprehensive attention. This study, guided by the principles of Grounded Theory and Qualitative research design, pursued three purposes: To investigate the... 

    Fabrication of a Collagen-Based Scaffold for Corneal Regeneration

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Maryam (Author) ; Abdekhodaie, Mohammad Jafar (Supervisor)
    Abstract
    Corneal diseases are one of the most common causes of blindness worldwide. The most common way to treat these diseases is to replace the damaged cornea with the donor cornea by corneal transplant. But limitations such as donor tissue deficiency, the risk of disease transmission and transplant rejection have made treatment of these diseases very difficult. A cornea made by tissue engineering can be used as a suitable alternative because of the limitations mentioned for corneal transplantation with donated tissue. At the same time, similarity of the scaffold to normal corneal tissue, both in terms of matrial and structural properties, is essential for proper repair of this scaffold by cells... 

    Agent Based Decision Logic Design for Vertiport in an On-Demand UAM network

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Mohammad (Author) ; Malaek, Mohammad Bagher (Supervisor)
    Abstract
    At present, urban aircraft do not exist. An essential question arises: if such aircraft were to be established, what infrastructure would be necessary for landing, takeoff, and service provision? Can the existing airport infrastructure be adapted for urban aircraft, or would a different approach be required? Consequently, the focus of this current research is to address this issue. The research involves the development of a multi-agent model using the Python programming language to study how important parameters such as the operation rule between aircraft and station, capacity and speed of the aircraft, and the distance between stations are related to the operational indicators of the... 

    Evaluating and Comparing the Effects of Various Materials used in Building Envelope on Energy Consumption using Building Information Modeling(BIM)

    , M.Sc. Thesis Sharif University of Technology Alizadeh Kharazi, Bahareh (Author) ; Alvanchi, Amin (Supervisor) ; Taghados, Hossein (Supervisor)
    Abstract
    Most of the energy consumed in the country is spent on heating and cooling of buildings. The use of various materials in building construction can have a significant impact on reducing energy waste and the cost of consuming gas and electricity. One of the ways to increase the quality and efficiency of resources, including energy saving, is to use industrial and semi-industrial materials. The purpose of this study is to compare the use of traditional, semi-industrial and industrial materials in the external wall of the building in terms of energy consumption and utilization costs, taking into account the initial cost of energy and the cost of energy during the operation period. In this... 

    Investigating the Effects of Heat Treatment and Ag Addition on the Microstructure, Mechanical Properties and Corrosion Behavior of

    , M.Sc. Thesis Sharif University of Technology Saadatmand Hashemi, Shakiba (Author) ; Alizadeh, Reza (Supervisor) ; Ashuri, Hossein (Supervisor)
    Abstract
    Magnesium and its alloys are among the new degradable implants due to their characteristics such as biodegradability, low density, elastic modulus close to bone, and biocompatibility, which have received much attention from researchers. However, in most biological applications, the insufficient corrosion resistance of this alloy causes the accumulation of hydrogen gas around the implant, the loss of mechanical strength and its destruction before the completion of the treatment period. In this research, magnesium base alloys Mg–4Sn, Mg–4Sn–0.2Ag and Mg–4Sn–1Ag are investigated to improve mechanical strength and corrosion resistance. Finally, after casting and alloying, microstructural,... 

    Entanglement in a Fabry-Perot Cavity with one Mechanical Degree of Freedom in the Presence of a Quantum Dot and the Laser Phase Noise

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Mohammad Hossein (Author) ; Bahrampour, Alireza (Supervisor)
    Abstract
    Coupling of optical and mechanical degrees of freedom through radiation pressure was, first, observed in the experiments for detection of gravitational waves. Recent experimental advances have granted reality to the long-hankered-after coupling between microscopic and macroscopic systems. In the first step, this thesis will review different aspects of cavity Optomechanics, such as: cooling, side-band formation and dynamics of an Optomechanical cavity. Then we will go further and study the Optomechanical dynamics of a cavity in the presence of an atom. To do so, we will analyze the entanglement, created between the center of mass motion of the atom and the mirror and will probe into its... 

    Implementation of Darcy-Brinkman-Stokes Model for Simulation of Acid, Gel Acid and Visco-Elastic-Surfactant (VES) Acid Injection into a Carbonate Core

    , M.Sc. Thesis Sharif University of Technology Alizadeh Kiapi, Mohammad Reza (Author) ; Fatemi, Mobeen (Supervisor) ; Bazargan, Mohammad (Supervisor)
    Abstract
    In this work, an improved model for simulating carbonate core acidizing, with the ability of correctly modeling fluid diversion in dual-core experiments is created based on an existing two-scale continuum model. The improvements are applied on the momentum transfer equation, continuity equation, pore-scale structure-property relations and fluid rheology model. Also a more realistic injection scenario and geometry configuration are presented for simulating the diversion experiments. The Darcy-Brinkman-Stokes equation is implemented instead of Darcy’s equation and the continuity equation is modified by adding the mass source term. A global rheology model is developed capable of capturing exact... 

    Model for Evaluation of Optimal Allocation of Natural Gas Resources in Iran

    , M.Sc. Thesis Sharif University of Technology Mohammad Alizadeh Arani, Ahmad (Author) ; Saboohi, Yadollah (Supervisor)
    Abstract
    Structural changes in the energy sector, including the need to diversify sources of energy supply, security of supply, energy consumption growth in developing countries, rising oil prices and the exhaustibility of fossil fuel reserves, environmental issues, increased consumption of petrochemical products etc., has led to increased share of natural gas in primary energy supply. Iran has a wide range of options to use natural gas endowment. The present research aims to develop a model for optimal allocation of natural gas to various applications.The gas distribution system is modeled in the present study. Technical onstraints together with economic characteristics are considered in the model.... 

    Exploring the Efficiency of Machine Learning Algorithms in Estimating Time-Variant Travel Time Distributions in River Basins

    , M.Sc. Thesis Sharif University of Technology Alizadeh Attar, Mehdi (Author) ; Danesh Yazdi, Mohammad (Supervisor)
    Abstract
    This study aimed to investigate the efficiency of machine learning algorithms in capturing the dynamics of water particles' age distribution and in estimating the time series of median travel time (MTT) in river basins. The mechanism of solute transport in a catchment does not follow the hydrograph shape of the catchment and depends on the spatial and temporal distribution of solute resident time. The equations governing the age dynamics of water particles discharged from a catchment have been presented analytically in recent research. These equations showed that the transfer of solutes depends on various factors, including climatic conditions, basin topography, and basin vegetation. Also,... 

    Safety Enhancement using SLAM Assisted Flight Control System (SAFCS)in Low-Level Flights

    , M.Sc. Thesis Sharif University of Technology Alizadeh, Hamid Reza (Author) ; Malaek, Mohammad Bagher (Supervisor)
    Abstract
    Ultralight aircraft (VLA category) are usually piloted by novice pilots under Visual Flight Rules (VFR). In this work, we demonstrate how newly developed techniques in robotics could be used to enhance flight safety in this category of aircraft, especially during landing around sunset. In this research we have investigated the ability of Simultaneous Localization And Mapping (SLAM) algorithms in low level flight just before touch-down. Different case-studies show that SLAM algorithm is efficient in detecting the runway threshold. Comparing five different methods of parameterizations for landmarks detection including: (1) Plucker, (2) Anchored Plucker, (3) Homogeneous, (4) Anchored... 

    The Study of Eliminating Gender Gap in Iran Labor Market on Participation Rate of Married Urban Women

    , M.Sc. Thesis Sharif University of Technology Asghari, Fatemeh (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Joshaghani, Hossein (Supervisor)
    Abstract
    The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

    Crack Detection in a Rotor using Traditional Mode Shape Based Modal Analysis Methods and Experimental Evaluation

    , M.Sc. Thesis Sharif University of Technology Ashtiani, Mohammad Reza (Author) ; Mohammad Navazi, Hossein (Supervisor)
    Abstract
    Fatigue crack growth can have harmful effects on the reliability rotary machine. While an early warning to crack, can be used to extend the life of these expensive machines and increase reliability.Structural Vibration Condition Monitoring as a primary fault detection method, achieved to a lot amazing result and for this reason studies vibration behavior of cracked rotational shaft is a big issue for engineers of dynamic machine.In this research, first check the fault detection methods based on structural vibration condition monitoring, mode shape methods were extracted. Then by modeling rotational shaft in computer and creation of crack on it, fault detection quality of these methods have... 

    The Effect of Increasing The Value of Natural Gas Production on Property Value, Wages, Unemployment Rate and Birth Rate in The United States of America (2000-2011)

    , M.Sc. Thesis Sharif University of Technology Asgari, Mohammad Hossein (Author) ; Rahmati, Mohammad Hossein (Supervisor)
    Abstract
    In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of... 

    Investigating and Analyzing the Optimal Method for Construction of Keshavarz Metro Station on Line Three of Esfahan Urban Railway

    , M.Sc. Thesis Sharif University of Technology Torabi Ziaratgahi, Mohammad Ali (Author) ; Sadaghiani, Mohammad Hossein (Supervisor)
    Abstract
    It is important to provide an appropriate and economically method with technical and engineering considerations to stabilize excavated underground spaces. The necessity of this, especially for the construction of underground metro stations located in the cities which faces many problems, is more evident. In this research, it has been tried to introduce an optimal method according to the type of area for the construction of the underground station. In order to obtain stress and strain condition in structural elements and surface deformations due to different stages of excavating, numerical modeling in FLAC3D has been used. By examining the parameters that affect the sustainability of this...