Loading...
Search for:
alizadeh--mostafa
0.147 seconds
Total 407 records
Simultaneous Analysis of Aliphatic Alcohols Mixtures Using an Electronic Nose Based on Nano/Microstructured Conducting Polypyrrole Film Prepared by Catalytic Electropolymerization on Cu/Au Interdigital Electrodes Using Multivariate Calibration
, Article IEEE Sensors Journal ; Volume 16, Issue 2 , 2016 , Pages 418-425 ; 1530437X (ISSN) ; Babaei, M ; Alizadeh, M. S ; Mani Varnosfaderani, A ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2016
Abstract
In this paper, nano/microstructured-conducting polypyrrole has been prepared on Cu/Au interdigital electrode surfaces by using constant potential amperometry technique. The Fe(II) ions were used as catalyst and X = ClO4 -, pTs-, Cl-, TCA-, DS-, DBS- was implemented as anion dopants. The morphologies of the films were investigated by field emission scanning electron microscope. A remarkable dependence was observed between the type of anion dopant and the morphology of polypyrrole (PPy). The sensing behavior of the PPy-X sensor has been studied toward acetone, methanol, ethanol, 1-propanol, 2-propanol, nitromethane, propylamine, pyridine, and gas mixtures of aliphatic alcohols. The responses...
High performance grout connection for pre-cast concrete structures
, Article International Conference on Sustainable Construction Materials and Technologies, Coventry, 11 June 2007 through 13 June 2007 ; 2007 , Pages 479-485 ; 9780415446891 (ISBN) ; Sharif University of Technology
2007
Abstract
Connections have very important role in pre-cast concrete structures, especially in seismic zones, and grout connections increase strength and resistance of pre-cast concrete structures for lateral forces. High performance grout connections (HPGC) provide new opportunities to design cost-effective pre-cast concrete structures. HPGC have been proposed to decrease cost of insulation, erection and crane cost of pre-cast concrete structures and to overcome weakness of traditional pre-cast concrete structure connections .This research focuses on properties of grout materials properties which produced in Iran and the effect of propylene fiber on the performance of grout connection. In the first...
Periodic solutions for a semi-ratio-dependent predator-prey dynamical system with a class of functional responses on time scales
, Article Discrete and Continuous Dynamical Systems - Series B ; Volume 9, Issue 2 , 2008 , Pages 267-279 ; 15313492 (ISSN) ; Hesaaraki, M ; Sharif University of Technology
2008
Abstract
In this paper we explore the existence of periodic solutions of a nonautonomous semi-ratio-dependent predator-prey dynamical system with functional responses on time scales. To illustrate the utility of this work, we should mention that, in our results this system with a large class of monotone functional responses, always has at least one periodic solution. For instance, this system with some celebrated functional responses such as Holling type-II (or Michaelis-Menten), Holling type-III, Ivlev, mx (Holling type I), sigmoidal [e.g., Real and mx2/((A + x)(B +x))] and some other monotone functions, has always at least one ω-periodic solution. Besides, for some well-known functional responses...
Modified Load Scheduling Using Smart Meters
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
Implementation of various incentive-based demand response strategies has great potential to decrease peak load growth and customer electricity bill cost. Using advanced metering and automatic demand management makes it possible to optimize energy consumption, to reduce grid loss, and to release generation capacities for the sake of providing sustainable electricity supply, and reducing electricity bills for the customers. With these objectives, this thesis examines the previously suggested load scheduling programs in both residential and industrial sectors, and proposes new practical strategies for load management. This thesis has mainly focuses on three subdivisions of load management...
The Analysis of Total Productive Maintenance Based on Computerized Maintenance Management System
, M.Sc. Thesis Sharif University of Technology ; mostafavi, mostafa (Supervisor)
Abstract
The main purpose of this thesis is to analyze the total productive maintenance based on computerized maintenance management system. At first, a detailed study on total productive maintenance is performed and then the requirements of this maintenance strategy are specified. Also, a computerized maintenance management system is defined which can help total productive maintenance to reach to its requirements. Finally, a conceptual model and entity-relationship model for computerized maintenance management system data base has been created
Study of HVDC Transmission for Offshore Wind Farms Based on Voltage Source Converters
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is...
Feasibility Study of Producing Active Pharmaceutical Ingredient from Conceptual Process to Mass Production-Case Study
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
The main aim of this thesis is to develop the technical knowledge of designing and making active ingredients of domestically produced drugs, decreasing the costs, independency in producing these products, and checking outflow of currency. It also aims to reduce the financial challenges of patients who have to pay huge amounts for such drugs. Conducting research in the field of reverse engineering and using its definition, and attempt in made to get knowledge into the stages of product development process, to determine the technical standards associated with each stage, to recognize how knowledge is shared during this process, and to present some methods of establishing the infrastructure...
Performance Improvement of Maximum Power Point Tracker in Grid-Connected Photovoltaic Systems
, M.Sc. Thesis Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
Increase in growing concerns over environmental pollution and depletion of fossil fuel resources motivate the need for cleaner energy technologies and stimulate research in facilitating renewable energy systems. In recent years, photovoltaic systems have attracted great attention since they remove the need for energy storage systems and intermediate processess for energy conversion. However, high capital cost, low efficiency and low energy density per area of these systems, as compared with other technologies hinder its industrial use. To surmount these bottlenecks and improve technical performance of PV systems, it is crucial to optimize configuration of convertor connection and to improve...
Coordinated Voltage Control of Power Systems in Normal and Emergency Operation States
, Ph.D. Dissertation Sharif University of Technology ; Parniani, Mostafa (Supervisor)
Abstract
One of the main objectives in operating a power system is to maintain the system voltage properly to avoid equipment damage and transfer power efficiently. Automatic control of transmission network voltage provides significant improvements in security, quality and efficiency of power system operation. This thesis investigates coordinated voltage control of power systems in normal, alert and emergency states. The aim is to propose a comprehensive framework for real-time operation of practical power systems, ensuring secure operation of the system in the normal state and after occurrence of sever contingencies.
At the first, a new coordinated voltage control scheme is proposed to ensure...
At the first, a new coordinated voltage control scheme is proposed to ensure...
The Analysis of Knowledge Management, Dimensions and Implementation Methods-Case study: Sardsaz Khodro Ind. Co
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Today, organizations are surrounded by basic and continuous changes such as declining organizational resources, reduction of the production cycles, and the need for rapid adaption. Those organizations remain competitive while maintaining their productivity, that have following characteristics: accurately plan and assess their knowledge resources, create and absorb beneficial knowledge, store and organize their knowledge, disseminate knowledge to needed areas, and use knowledge in practice and decision making, to improve their products/services as well as their performance. Therefore, the human capital has been considered as knowledge owners and the most important organizational resource, on...
Feyerabend’s Point of View on Scientific Progress
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Feyarabend’s philosophy of science is against method and rule such that he believes that “anything goes”. However, he sometimes applies the term “progress”. Reviewing his publications shows that from his point of view, progress is qualitative and relative. So, unlike other philosophers of science Feyarabend ignores the clarification of the concept; subsequently, his applications of the term “progress” are somewhat ambiguous. However, by studying his philosophy, one may realize what should be done to achieve progress in any sense. The affirmative aspect of Feyerabend’s philosophy, while highlights the social and ethical elements, considering his humanitarian outlook as well as his special...
Analyzing the Healthcare Wastes and Feasibility Study of Related Items (Plastics)
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Increasing population and competition for producing various productions and also more consumption in recent decades, result in producing more wastes. Therefore effective and continuous waste management is essential for monitoring the process (from the wastes generation source to the waste disposal) and establishing the efficient strategies to reduce wastes. One of the major sources of waste generation is hospitals that cause lots of environmental problem unless they are managed properly.Recycling is an important element of waste management that can reduce costs by innovative and proper management. The purpose of this research is identification of recyclable plastic items and estimates the...
Analyzing Cost Engineering Along With Presenting A Model To Reduce Cost Of industrial Products
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
Lack of financial sources for production and performing projects has been an effective issue in all governmental and non-governmental organizations. So, using a structure with capability of detecting and forecasting all expenses and costs, and being able to convert the mass of data into useful and instrumental reports for managerial decision such as estimating total cost, selecting the syntax of production and etc is obvious for recourse management of every organization. Among the various components of the cost engineering system, cost management system by recording and allocating cost is an important issue in efficiency of every cost engineering system.In this thesis, Automotive Industrial...
Feasibility Study of Manufacturing of Disposable Plant Containers
,
M.Sc. Thesis
Sharif University of Technology
;
Mostafavi, Mostafa
(Supervisor)
Abstract
Although laws vary in the competitive business world of today and the changing supply and demand parameters show that the process of delivering new products to market is very important.Most organizations today have found that spending more than ever on trusting in traditional competitive levers such as quality, cost reduction and differentiation in selling more products and services are not enough to be successful in market, instead notions such as speed, flexibility andagility can have a significant trend toward offering new products and services. There aresome good reasons for knew that organizations need new ways to develop their new products to survival, compete with its competitors and...
Research to Provide Iranian Customer Satisfaction Index Model in Industry, Case Study: Iran Khodro Co., Golrang Co. and Kaleh Co
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
In recent decades many countries have attempted to measure and formulate customer satisfaction index (CSI), as an important factor in micro and macro-economic level. In developed country CSI has the same value of GNP. Customer Satisfaction Index model actually represents the relationship between primary factors of satisfaction and satisfaction results in the macro level for a country and includes all business aspects. In many countries, industrial companies have a wide range of products and providing Customer Satisfaction Index model for this aspect which can be a base of presenting national customer satisfaction index model. Accordingly, the main goal of this study is providing an Iranian...
On Feenberg’s Alternative Thinking About Virtual Space Technologies
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
Cultural and social problems in the modern age have motivated many thinkers to analyze modernity. Some of them have tried to solve these problems and, if possible, prevent their occurrence in the future. Proposed solutions are mostly dystopian, i.e. by being disappointed, they think the only possible way to overcome these problems is to annihilate modern civilization, or they pursue a passive approach; i.e. they have accepted the problems of modernity but only seek a way to mitigate its challenges. Among these, solutions which try to make use of the capacities of the modern civilization, especially emerging technologies, are really scarce. These approaches seek to realize (and make...
Assessment of Effectiveness of the “Physical Asset Management Model” in Productivity of Maintenance System, Using ERP
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
People in the organization who are influential, opinion leaders, decision-makers and approvers need to be incorporated into the entire Strategic Planning process at some levels .The Management of these Stakeholders involves identifying their organizational roles and their disposition towards and understanding of Strategic Planning, then to work with them throughout the process to improve or maintain their opinion of the value of Strategic Planning through continuous updating and addressing of their issues, concerns and questions. Physical asset practitioners apply the physical asset management framework and policies to ensure the performance and output potential of physical assets through...
Feasibility Study of Fuel Cell Production with Sustainable Environment Approach
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
So far, many activities have been done in regarding to decrease vehicles' pollution in the international level that the electric vehicles manufacture has been emphasized in recent years. According to these issues and need to decrease air and environment pollution, the use of fuel cell as a source of power generation can have a specific effect on decreasing this pollution. In our country, according to high statistics of manufacturing and offering vehicle particularly the vehicles with high pollution, there is a need to invest in the field of creating renewable (clean) energy production systems. Regarding to decrease environment pollution and according to the importance of fuel cell's...
Has "The Work and Technology Course" in the Elementary School and Guidance School Paid Enough Attention to Improve Technological Thinking?
, M.Sc. Thesis Sharif University of Technology ; Taghavi, Mostafa (Supervisor)
Abstract
It has been five years since the new education system was started, according to which fundamental changes have been applied to school text books. The mentioned changes in the text books are based on “the fundamental transformation document” and “Iran’s national educational curriculum”. In “Iran’s national educational curriculum”, eleven fields concerning pedagogy and learning are explicitly mentioned; one of these eleven fields is “training and learning work and technology”. One of the merits which has been stressed in this field, is “technological thinking”. Nowadays, methods of extending and reinforcing the technological thinking have come to be the subject of investigations in many...
Analysis of Dimensions, Objective and Implementation of Knowledge Management in Production Institutes
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
The increasing significance and deployment of knowledge management(KM) is the main reason for selecting the topic of this research. This research tries to analyse the dimensions and KM implementation methods in press section of maintenance department in Saipa company. This study has a qualitative approach and the method is based on a case study. Data has been collected by questionnaires. Two questionnares have been provided in this research and distributed among different staff of press section in maintenance department. The concept of knowledge management maturity is applied and the goal of first questionnaire is based on this concept. The level of KM maturity is assessed via this...