Sharif Digital Repository

In order to provide anonymity, universal cryptosystems have been used in various applications, including mixnets with multiple receivers. Unlike ordinary re-encryption cryptosystems, universal cryptosystems for re-encryption of ciphertexts do not require knowledge of the public key of the receiver. Golle et al. introduced universal cryptosystems for public key cryptography. Contrary to public key cryptography, in ID-based cryptography, a public key infrastructure is not needed, which makes it suitable for situations where it is not cost-effective to distribute certificates or establish a public key infrastructure. In this paper, we first generalize the definition of universal cryptosystems... 

Universal Re-encryption Cryptosystems do not require the knowledge of the recipient's public key for re-encrypting a ciphertext whereas conventional Re-encryption Cryptosystems need that knowledge. In this paper, we present the first Identity-based Universal Re-encryption Cryptosystem scheme whose re-encryption algorithm does not need to have the knowledge of the recipient's identity. By generalizing the definition of Universal Semantic Security to Identity Based Universal Cryptosystems, we prove the security of our scheme. There are some applications for universal re-encryption cryptosystems which cannot be made using conventional cryptosystems. One significant application of these... 

Recent studies in the field of text-steganography shows a promising future for linguistic driven stegosystems. One of the most common techniques in this field is known as lexical substitution which provides the requirements for security and payload capacity. However, the existing lexical substitution schemes need an enormous amount of shared data between sender and receiver which acts as the stego key. In this paper, we propose a novel encoding method to overcome this problem. Our proposed approach preserves the good properties of lexical substitution schemes while it provides short length stego keys and significant robustness against active adversary attacks. We demonstrate high efficiency... 

One of the most important systems for providing anonymous communication is the Mix nets which should provide correctness and privacy as security requirements against active adversaries. In 2009, Zhong proposed a new mix net scheme which uses identity-based cryptographic techniques and proved that it has 'correctness' and 'privacy' properties in the semi-honest model. Since the semi-honest model is a very strong assumption for practical application, we show that if a user or the last mix server is corrupted, Zhong scheme does not provide privacy against an active adversary  

An expanding flight envelope in the landing phase of a typical jet transport aircraft in presence of strong wind shears using a learning capable control system (LCCS) is investigated. The idea stems fromhuman beings functional architecture that gives them the ability to do more as they age and gain more experience. With the knowledge that classical controllers lack sufficient generality to cope with nonlinear as well as uncertain phenomenon such as turbulent air, the focuse is on different types of intelligent controllers due to their learning and nonlinear generalization capabilities as candidates for the landing flight phase. It is shown that the latter class of controllers could be used... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion... 

Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for... 

Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of...