Loading...
Search for:
ameli--a
0.145 seconds
Total 14667 records
Modeling interfacial tension of normal alkane-supercritical CO2 systems: Application to gas injection processes
, Article Fuel ; Volume 253 , 2019 , Pages 1436-1445 ; 00162361 (ISSN) ; Hemmati Sarapardeh, A ; Tatar, A ; Zanganeh, A ; Ayatollahi, S ; Sharif University of Technology
Elsevier Ltd
2019
Abstract
To study the gas injection scenario for successful implementation of enhanced oil recovery (EOR)processes, the prediction of interfacial tension (IFT)between injected gas and the crude oil is of paramount significance. In the present study, some intelligent methods were developed for determining IFT values between supercritical CO2 and normal alkanes. IFT was considered as a function of temperature, pressure, and molecular weight of normal alkanes. The developed methods were Multilayer perceptron (MLP), Genetic Algorithm Radial Basis Function (GA-RBF), and Conjugate Hybrid-PSO ANFIS (CHPSO-ANFIS). The average absolute percent relative errors (AAREs)for the stated techniques were found to be...
Designing an Automated and Smart Electric Power Distribution System
, M.Sc. Thesis Sharif University of Technology ; Vakilian, Mehdi (Supervisor)
Abstract
Feeder reconfiguration is one of the most prominent tasks for loss reduction, reliability improvement and also congestion alleviation in distribution networks. Besides improving abovementioned operational issues, during a long period of time, proper switching in appropriate times can causes a lot of economic savings. Furthermore, it can be intensified when capacitors are implemented and controlled in the network. To reach this purpose, most of the previous literature focuses merely on the power grid reconfiguration. Few of these researches have considered this problem as a dynamic one and studied that in a period of time, e.g. one day, considering fixed level of loads despite the others that...
Proposing a Control Strategy for Treatment of Hepatitis C Disease
, M.Sc. Thesis Sharif University of Technology ; Shahrokhi, Mohammad (Supervisor)
Abstract
Due to the importance of hepatitis disease, especially hepatitis C, from public health view point, this research aims to investigate and suggest an efficient medical therapy for this disease. First, available models are analyzed and the suitable one is chosen. Three controllers namely, fixed PI, adaptive PI and exact linearization control (GLC) are designed to control the hepatitis C disease using the drug efficacy as the manipulated variabel. Controller parameters are determined by the Genetic Algorithm (GA) and their performances are evaluated using the selected model. Uncertainties have been considerd in both model structure and parameters and controllers performances are investigated in...
A parametric study on residual stresses and forging load in cold radial forging process
, Article International Journal of Advanced Manufacturing Technology ; Volume 33, Issue 1-2 , 2007 , Pages 7-17 ; 02683768 (ISSN) ; Movahhedy, M. R ; Sharif University of Technology
2007
Abstract
In this work, a comprehensive study of radial forging process is presented through 2-D axisymmetric and 3-D finite element simulations while considering internal tube profile. The tube used in this investigation has four internal helical grooves along its length. The material is modeled with the elastic-plastic behavior, and sliding-sticking friction model is utilized to model the die-workpiece and mandrel-workpiece contacts. The numerical results in the 2-D case are compared with available experimental data. Residual stresses in the forged product, stress concentration around the grooves, pressure distribution on the hammers and mandrel and maximum forging load are studied. The effects of...
Iranian national olympiad in informatics
, Article International Conference Joint with the 29th International Olympiad in Informatics, IOI 2017, 28 July 2017 through 4 August 2017 ; Volume 11, Issue Special Issue , 2017 , Pages 25-33 ; 18227732 (ISSN) ; Asadi, A ; Jabal Ameli, A ; Seddighin, S. R ; Shahmohammadi, F ; Sharif University of Technology
Vilnius University
2017
A Lightweight Deep Learning Model for Online Network Traffic
, M.Sc. Thesis Sharif University of Technology ; Jalili, Rasool (Supervisor)
Abstract
Traffic classification is crucial for the execution of many security and managerial tasks in a network, such as identifying malicious data, detecting disruptive users, and preventing the passage of traffic from certain applications. Nowadays, a significant portion of traffic in computer networks is encrypted. Therefore, the classification of encrypted traffic requires the use of solutions for analyzing encrypted traffic. In recent years, many solutions based on machine learning and deep learning have been proposed for analyzing encrypted traffic. While most of these solutions focus on improving the accuracy of network traffic classification, less attention has been paid to their...
A dynamic method for feeder reconfiguration and capacitor switching in smart distribution systems
, Article International Journal of Electrical Power and Energy Systems ; Volume 85 , 2017 , Pages 200-211 ; 01420615 (ISSN) ; Ahmadifar, A ; Shariatkhah, M. H ; Vakilian, M ; Haghifam, M. R ; Sharif University of Technology
Elsevier Ltd
2017
Abstract
In distribution systems, feeder reconfiguration (FR) can lead to loss reduction, reliability improvement and some other economic savings. These advantages can be intensified by proper control and switching of Capacitor Banks (CBs). In this paper, using Ant Colony Optimization (ACO) technique, a novel method is proposed for simultaneous dynamic scheduling of FR and CB switching in the presence of DG units having uncertain and variant generations over time. This method is applicable to both smart and classic distribution systems. While for the latter, state estimation method should be used to estimate the loads at different buses by employing a limited number of measurements. The objective of...
Continual Learning Using Unsupervised Data
, M.Sc. Thesis Sharif University of Technology ; Soleymani Baghshah, Mahdieh (Supervisor)
Abstract
The existing continual learning methods are mainly focused on fully-supervised scenarios and are still not able to take advantage of unlabeled data available in the environment. Some recent works tried to investigate semi-supervised continual learning (SSCL) settings in which the unlabeled data are available, but it is only from the same distribution as the labeled data. This assumption is still not general enough for real-world applications and restricts the utilization of unsupervised data. In this work, we introduce Open-Set Semi-Supervised Continual Learning (OSSCL), a more realistic semi-supervised continual learning setting in which out-of-distribution (OoD) unlabeled samples in the...
Application of population balance equation in modeling of asphaltene particle size distribution and characterization of aggregation mechanisms under miscible gas Injection
, Article Journal of Molecular Liquids ; Volume 232 , 2017 , Pages 207-213 ; 01677322 (ISSN) ; Hamed Mahvelati, E ; Ameli, F ; Dabir, B ; Rashtchian, D ; Sharif University of Technology
Elsevier B.V
2017
Abstract
Particle size distribution (PSD) is an important factor that determines how asphaltene instability can damage porous media during natural depletion and enhanced oil recovery processes. In this work, aggregate size distribution under natural depletion and miscible nitrogen injection processes are determined via image analysis techniques and the results are modelled by population balance equation. Unimodal distribution curves in natural depletion show the dominance of particle-particle aggregation mechanism and the clustering is detected only around crude oil bubble point pressure. It is also observed that miscible nitrogen injection considerably increases the number and size of asphaltene...
A novel simultaneous reconfiguration and capacitor switching method to improve distribution networks operation
, Article 2014 14th International Conference on Environment and Electrical Engineering, EEEIC 2014 - Conference Proceedings ; May , 2014 , pp. 295-300 ; ISBN: 9781479946617 ; Davari-Nejad, E ; Kamyab, F ; Vakilian, M ; Haghifam, M. R ; Sharif University of Technology
2014
Abstract
Due to the important role that distribution systems play in quality of power delivered to the customers, there has always been a great deal of interest in investigating different methods of efficiency enhancement for these networks. Two of these methods are Feeder Reconfiguration (FR) and Capacitor Allocation (CA); both have been widely employed to reduce losses and improve several other operational characteristics in electrical power distribution systems. As in FR process the topology of the network changes, it is necessary to change some previous settings; for instance: the capacity of capacitor banks in service in each bus, after each reconfiguration process. This is due to the fact that...
Secure deep-JSCC against multiple eavesdroppers
, Article Proceedings - IEEE Global Communications Conference, GLOBECOM ; 2023 , Pages 3433-3438 ; 23340983 (ISSN); 979-835031090-0 (ISBN) ; Letafati, M ; Erdemir, E ; Khalaj, B. H ; Behroozi, H ; Gündüz, D ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2023
Abstract
In this paper, a generalization of deep learning-aided joint source channel coding (Deep-JSCC) approach to secure communications is studied. We propose an end-to-end (E2E) learning-based approach for secure communication against multiple eavesdroppers over complex-valued fading channels. Both scenarios of colluding and non-colluding eavesdroppers are studied. For the colluding strategy, eavesdroppers share their logits to collaboratively infer private attributes based on ensemble learning method, while for the non-colluding setup they act alone. The goal is to prevent eavesdroppers from inferring private (sensitive) information about the transmitted images, while delivering the images to a...
Intelligent semi-active vibration control of eleven degrees of freedom suspension system using magnetorheological dampers
, Article Journal of Mechanical Science and Technology ; Volume 26, Issue 2 , 2012 , Pages 323-334 ; 1738494X (ISSN) ; Sarrafan, A ; Khayyat, A. A. A ; Zabihollah, A ; Sharif University of Technology
2012
Abstract
A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network...
Performance and exhaust emission characteristics of a spark ignition engine operated with gasoline and CNG blend
, Article Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division ; 2012 , Pages 179-187 ; 15296598 (ISSN) ; 9780791844663 (ISBN) ; Hamidi, A. A ; Mozafari, A. A ; Sharif University of Technology
2012
Abstract
Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the...
A comparative study of the performance of a SI engine fuelled by natural gas as alternative fuel by thermodynamic simulation
, Article 2009 ASME Internal Combustion Engine Division Fall Technical Conference, ICEF 2009, Lucerne, 27 September 2009 through 30 September 2009 ; 2009 , Pages 49-57 ; 9780791843635 (ISBN) ; Hamidi, A. A ; Mozafari, A. A ; Sharif University of Technology
American Society of Mechanical Engineers (ASME)
2009
Abstract
With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost...
Analytical and experimental analyses of nonlinear vibrations in a rotary inverted pendulum
, Article Nonlinear Dynamics ; Volume 107, Issue 3 , 2022 , Pages 1887-1902 ; 0924090X (ISSN) ; Pasharavesh, A ; Khayyat, A. A. A ; Sharif University of Technology
Springer Science and Business Media B.V
2022
Abstract
Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing...
A suction-controlled ring device to measure the coefficient of lateral soil pressure in unsaturated soils
, Article Geotechnical Testing Journal ; Volume 44, Issue 1 , 2020 ; Garakani, A. A ; Golshani, A ; Mirzaii, A ; Sharif University of Technology
ASTM International
2020
Abstract
A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring...
Gum tragacanth gels as a new supporting matrix for immobilization of whole-cell
, Article Iranian Journal of Chemistry and Chemical Engineering ; Volume 24, Issue 4 , 2005 , Pages 1-7 ; 10219986 (ISSN) ; Vaziri, A ; Seifkordi, A. A ; Kheirolomoom, A ; Sharif University of Technology
2005
Abstract
We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for...
True Class-E Design For Inductive Coupling Wireless Power Transfer Applications
, Article 30th International Conference on Electrical Engineering, ICEE 2022, 17 May 2022 through 19 May 2022 ; 2022 , Pages 864-868 ; 9781665480871 (ISBN) ; Safarian, A ; Fotowat Ahmady, A ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2022
Abstract
The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been...
Crashworthiness determination of side doors and B pillar of a vehicle subjected to pole side impact
, Article Applied Mechanics and Materials ; Vol. 663, issue , 2014 , p. 552-556 ; Faieza, A. A ; Sahari, B. B ; Nuraini, A. A ; Halali, M ; Sharif University of Technology
2014
Abstract
Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy...
Investigation of Thickness Influences On Energy Absorption For Side Doors And B Pillar In Euro NCAP Pole Side Impact Test
, Article Applied Mechanics and Materials ; Vol. 663, issue , Oct , 2014 , p. 585-589 ; Faieza, A. A ; Sahari, B. B ; Nuraini, A. A ; Halali, M ; Sharif University of Technology
2014
Abstract
To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its...