Sharif Digital Repository

In nature, catalysis is of vital importance in a wide variety of biochemical processes catalyzed by metalloenzymes. The functions performed by the metalloenzymes and their significance have inspired a range of biomimetic studies, and intense efforts have been concentrated on the synthesis of low molecular weight complexes to model the spectroscopic features of such enzymes. Concomitantly, a challenging frontier in the field of biomimetic chemistry is the development of highly reactive model compounds that are able to effect rapid and selective substrate conversion. Some important catalytic transformations that have gained attention in recent years involve the carbon-carbon coupling, olefin... 

Different parts of this research are focused on developing FO membranes and improving their performance. For this purpose, thin film composite (TFC) membranes with fixed composition of polyethersulfone/polyamide (PES/PA) have been used to investigate the effect of nanocomposites containing transition metal dichalcogenides (TMDs) on their performance. The support layer in all cases is PES, which is prepared through the phase inversion process and does not contain any nanofillers. The modification process takes place in the polyamide layer by dispersing the desired nanoparticles in the aqueous monomer solution necessary to form this active layer. Identification and characterization of... 

In the first part of this thesis, the application of metal oxide nanoparticles in oxidative degradation of methylene blue is discussed. Nanoparticles of manganese tungstate (MnWO4) were prepared via an impregnation method using Mn(NO3)2.4H2O and WO3 as a source of Mn and W, respectively. The morphology of the manganese tungstate nanoparticles was studied in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). MnWO4 nanoparticles showed severe catalytic performance for the degradation of organic dye (methylene blue) in the presence of tertiary-butyl hydrogen peroxide, TBHP, as the oxidant at room temperature in water. Mn doped ZnO... 

The Internet of things (IoT) is an emerging technology, encompassing wide aspects of applications. It provides intelligent connections between objects, devices, and living creatures. The IoT devices are mostly powered by limited energy sources like batteries. Therefore, optimizing their power consumption is necessary. First, this idea will be examined from different perspectives and then its applications and challenges in various fields and areas will be presented. The IoT applications require low-cost, low-energy, reliable, robust, secure, and scalable networks. The Low-power Wide-Area Network (LPWAN) is considered as one of the most potential solutions for IoT in the near future due to its... 

The aim of this study is to quantify the social impacts of infrastructure failure for community resilience after seismic hazards with the focus on Post Traumatic Stress Disorder (PTSD). Many studies have investigated the failure of infrastructures and their interdependencies for community resilience; however, there is a lack of comprehensive quantitative resilience framework considering social interactions along with lifelines. The upcoming research is based on the Rtx framework, which was developed at Sharif University of Technology for community resilience analysis. In the mentioned framework, the performance of different community infrastructures is simulated using probabilistic and... 

Considerable effort has been directed in recent years towards the transition metal complex catalyzed oxidation of organic compounds. Herein the synthsis of the iron complex of bis(oxazoline) ligand as a novel catalyst is reported, and the catalytic activity of this complex in oxidation of sulfides is investigated. Bis(2-oxazolynil)methane as ligand is prepared by condensation of diethylmalonate with 2-aminoethanole in 1:2 molar ratio and finally corresponding complex is synthesized by the reaction between FeCl3.6H2O and Bis(2-Oxazolynil)methane in 1:1 molar ratio. The complex is characterized by using IR, UV-Vis, cyclic voltametery, conductometery and elemental analysis data. Moreover,... 

In this project a wide-band inductorless Low Noise Amplifier (LNA) has been designed using 0.18 micrometer CMOS technology. The specification of this amplifier has been explored in frequency band of 330MHz to 10GHz. Wide-band input and output impedance matching, low Noise-Figure (NF), reasonable voltage gain and low power consumption are the main challenges of Low Noise Amplifier design. Without using an inductor a better overall performance of LNA in a wide frequency band as well as a lower chip area has been achieved. In this design a novel noise cancellation technique in common-gate topology has been used for lowering the Noise Figure of the LNA. Group Delay of the designed LNA, which is... 

The first part of this thesis describes the synthesis and characterization of several Mn, Fe and Mo complexes containing tridentate Schiff base and oxazoline ligands and their reactivities as catalysts in the oxidation of organic compounds like olefins and sulfides, as well. The crystal structures of newly prepared cis-dioxo-bis[2-(2′-hydroxyphenyl)-oxazolinato]molybdenum(VI), cis-[MoO2(phox)2] and (N-hydroxyphenyl-salicylidenamine)(acetylacetonato)ethanol iron(III), [FeIII(N-OPh-sal)(acac)EtOH] complexes have been described by X-ray crystallography. Due to the difficulties in the preparation of suitable single crystals of novel... 

In this project, issues related to designing and fabricating active phase shifter blocks on the silicon substrate have been examined. Phase shifter circuits are designed in a way that have the most bandwidth and the less sensitivity to process characteristics changes and environmental conditions. The purpose of this research, is designing an active 6 bits phase shifter. The active phase shifter synthesizes the required phase using a phase interpolation process by adding quadrature phased input signals. It uses a new quadrature all-pass filter for quadrature signaling with a wide bandwidth. Also substitute structure has been suggested to this filter which is the main block in determining... 

Integration of radio transceivers results in developing low power low cost wireless systems and allows delivery of multimedia contents to battery-powered mobile terminals. Portable reception of digital video for hand-held devices is one of the applications, for which, some telecommunications standards have been developed in the recent years. This research deals with the integrated implementation of the radio frequency parts of the digital video receiver, especially the frequency synthesizer. The key aspects of the digital video reception system are the required signal to noise ratio, which is relatively high, wide band input signals and strong interferers in the receiving band.
In... 

This thesis deals with the front-End of an Integrated RFID Reader operated in 860MHz to 960MHz, which integrates a RF transceiver including PA, LNA and Mixer. In the receiver part, a power amplifier was fabricated and measured and in the transmitter part, LNA and Mixer were designed. There is a growing interest in utilizing CMOS technologies for RF power amplifiers (PAs). Although several advances have been made recently to enable full integration of PAs in CMOS, it is still among the most difficult challenges in achieving a truly single-chip radio system in CMOS. This is exacerbated by supply voltage reduction due to CMOS technology scaling and on-chip passive losses due to the conductive... 

The selective oxidation of sulfides to sulfoxides is an important method in organic synthesis because sulfoxides are useful synthetic intermediates for the construction of various chemically and biologically significant molecules. To date, the most important method of preparation involves the oxidation of sulfides. Various oxidizing agents are used for this purpose. Oxovanadium(IV)(Salen) and oxovanadium(V)(Salen)Cl were synthesised and screened in the vanadium-catalysed oxidation of sulfides to solfuxides with urea hydrogen peroxide(UHP) as terminal oxidant. Both complexes showed good activity and selectivity trough the catalytic reaction.characterized by elemental analyses, IR, 1H and 13C... 

Fully integrated frequency synthesizer is one of the important system-on-chips building blocks. Among this circuit’s remarkable applications, Bioelectronics field is very common. In these applications, advanced microelectronic circuits are used in order to diagnosis and treatment of diseases. The aim of this thesis is design and implementation a wideband frequency synthesizer in a 0.18um CMOS technology. The main usage of this circuit is in a fully integrated implantable biomedical sensory chip. This circuit generates two necessary local signals in sensory chip to stimulus cells and process the information.
Frequency synthesizer is based on phased locked loop (PLL) circuit and produce... 

The 2-(2′-hydroxyphenyl)-oxazoline ligand (Hphox) is generated from 1:1 condensation of methyl salicylate with 2-aminoethanol. Novel [Ru(Hphox)2(H2O)2] (Hphox = 2-(2′-hydroxyphenyl)-oxazoline ) complex has been synthesized and characterized by physic-chemical methods. Oxidation of sulfides catalyzed by the mixed-ligand ruthenium(II) complex [Ru(Hphox)2(H2O)2]using urea-hydrogen peroxide (UHP) as oxidant was investigated under mild condition within 1 h. The results showed that mixed-ligand ruthenium(II) complex was effective catalyst in oxidation of sulfides in whichsulfoxideswere the only products. Using this catalytic system in the oxidation of alkanes, ketones were obtained as the main... 

Inert gold become catalytically active when dispersed in the form of nanoparticles. Isolated gold nanoparticles have demonstrated high catalytic activity for both oxidation and reduction reactions. In order to obtain high catalytic activity, gold nanoparticles are generally dispersed on support materials, among which oxides are commonly used. However, a substantial decrease in activity and selectivity of the immobilized catalysts is frequently observed due to the heterogeneous nature of these support materials in reaction media. In the course of our study on the metal-based catalysis for synthesis of organic compounds, we herein report that rod-shaped Au nanoparticles in aqua solution... 

This thesisconsiders new fundamental approaches to yield heterogeneous catalysts in to three sections. The first section described the immobilization of the molybdenum-Schiff base complexes in pores of SBA-15 in two different methodologies depending on the actual structure of the complexes., (i) stepwise formation of the complex by initial covalent anchoring of one of the components and consecutive solid phase synthesis consisting of the condensation of the other components of the salen complex (iii) one-step complex immobilization by covalent binding through the ligand.Based on the first methodology, we report the preparation of ordered mesoporous silica SBA-15 containing a molybdenum... 

In this work, synthesized Fe3O4 magnetic nanoparticles andcoated with SiO2 to prepare magnetic core-shell nanoparticles. Then immobilized Schiff baseof iron and vanadium complexes on magnetic core-shell nanoparticles was prepared as a recoverable magnetic nano catalysts. These catalysts were named Fe3O4@SiO2@L1@Fe, Fe3O4@SiO2@L2@Fe and Fe3O4@SiO2@L3@V. Furthermore,olefines epoxidation, sulfides and alcohols oxidation were studied with using iron and vanadium magnetic nano catalysts. The supported catalysts were characterized by atomic absorption, FT-IR and UV–Vis spectra.The catalytic performance of the synthesized iron catalyst was tested for the epoxidation of cyclohexene, styrene and... 

In this research, synthesis of new heterogeneous catalysts has been studied. These catalysts were prepared in three different areas of the synthesis of coordination polymers and metal-organic frameworks, supported palladium nanoparticles on these polymers, and production of metal oxide nanoparticles. At first, metal organic frameworks of cobalt and manganese transition metals were synthesized through hydrothermal method. In order to prepare these frameworks, 1,4-benzenedicarboxylic acid (terephthalic acid) and 2-amino-1,4-benzenedicarboxylic acid ligands were utilized as spacer ligands. X-ray analysis indicated that the structure of polymers is composed of secondary building units (SBUs) of...