Sharif Digital Repository

Eight eco-friendly, and magnetically-separable heterogeneous photocatalysts including five Au nanoparticles (NPs) modified magnetic TiO2@Fe3O4 NPs and three Ag-Au bi-plasmonic NPs-decorated TiO2@Fe3O4 NPs with enhanced photocatalytic performance under visible light were synthesized and used for photodegradation of methyl orange (MO) as a model pollutant in textile wastewater samples. The photocatalytic activity was assessed using two radiation sources namely, an intense linear 532-nm laser and a continuous solar-simulated xenon lamp. Compared to the TiO2 alone, the prepared photocatalysts revealed efficient photocatalytic activity in visible region due to the presence of two localized... 

A rapid, simple and efficient liquid chromatographic method was developed for simultaneous determination of three active ingredients namely, chlorpheniramine maleate, phenylephrine hydrochloride and guaifenesin along with sodium benzoate preservative common cold medications (syrups) and the method was validated based on the International Conference on Harmonization (ICH) and United State Pharmacopeia (USP) guidelines. Separation of the analytes was achieved within 15 min on a nucleosil gravity phenyl column in a single run with a mobile phase consisting of methanol: buffer mixture (15:85 v/v) at room temperature, in isocratic mode with flow rate of 0.8 mL min−1. A comprehensive study on... 

Mix uniformity is a critical quality control point in food manufacturing. Process analytical technology (PAT) provides new technological opportunities for fulfilling and perhaps replacing conventional sampling methods by proposing spectroscopic analyzers for measuring blend homogeneity. Many spectroscopic analyzers have been used in powder blending processes. Light-induced fluorescence (LIF) is the most rapid and consistent underutilized PAT. An experiment was conducted to evaluate the effects of DL-methionine concentration, moisture content (MC) and bulk density (BD) on LIF responses. Fluorescent responses to powder mixtures comprising 0.05–0.50% w/w fluorescent active pharmaceutical... 

A dispersive micro-solid-phase extraction (D-μ-SPE) procedure coupled with surfactant-enhanced spectrofluorimetric detection was developed for determination of ofloxacin and lomefloxacin from biological and environmental samples. The D-μ-SPE procedure was performed using magnetic Fe3O4 nanoparticle grafted multi-walled carbon nanotube as an efficient adsorbent. The main factors affecting the signal enhancement (including surfactant concentration and pH) and extraction efficiency (including pH, extraction time, sample volume, amount of magnetic adsorbent, and desorption conditions) were investigated in detail. Under the optimized conditions, the calibration curves were linear (R2 0.9995) over... 

In this study, two new composite membranes with antifouling and anti-biofouling properties were prepared through the modification of commercial polyamide (PA) discs using combination of in-situ polymerization of polyacrylic acid (PAA) and grafting of two synthesized bi-plasmonic Au-Ag and Ag-Au photocatalysts. The synthesis and characterization of the photocatalysts in batch mode were discussed in details as primary studies. Two intense 405-nm and 532-nm lasers for Ag-Au and Au-Ag photocatalysts, respectively and a solar-simulated xenon lamp for both photocatalysts were applied for photodegradation studies and the results were compared. In addition, the effect of other parameters such as... 

Laser assisted drug release from a synthesized plain polymer composed of poly (butyl methacrylate-co-acrylamide-co-methacrylic acid) [P(BMA-co-AAm-co-MAA)] and a metallo-polymer composed of silver nanoparticles (Ag NPs) grafted plain polymer (the nanocomposite) were studied to investigate their capability to serve as drug carriers. Positive temperature dependent swelling changes were observed for both carriers and their thermal sensitivity and thermal and optical switching properties were investigated in two buffered solutions. An acidic solution with pH = 1.2 to simulate stomach body condition and a neutral solution with pH = 7.4 to simulate intestine condition. Reversible phase transition... 

The synergistic effect of plasmonic Au-Ag nanoparticles (NPs) on the increase of absorption band of nano-sized TiO2 and magnetic property of Fe3O4 NPs on the separation-ability of this semiconductor was applied for preparation of eight magneto-plasmonic photocatalysts for degradation of rhodamine-6G (Rh6G) in textile wastewater. The size, structure, morphology, crystallinity and optical and magnetic properties of prepared photocatalysts have been evaluated by various characterization techniques. Their photocatalytic activities were assessed under irradiation of an intense linear 405-nm laser and a continuous solar-simulated xenon lamp. The results were demonstrated that in comparison to the... 

A switchable dual light- and temperature-responsive drug carrier using gold nanoparticles (Au NPs)-grafted poly(dimethylacrylamide-co-acrylamide)/poly acrylic acid [P(DMA-co-AAm)/PAAc] hydrogel was prepared by free radical polymerization procedure using N,N-methylenebisacrylamide as cross-linker and ammonium persulfate as initiator. Initial P(DMA-co-AAm) hydrogel and uniformly-distributed stable Au NPs, prepared by reduction of hydrogen tetrachloroaureate (III) hydrate in the presence of trisodium citrate, were synthesized separately. Then, the prepared P(DMA-co-AAm) and Au NPs were added to an acrylic acid solution along with the cross-linker and initiator to prepare PAAc hydrogel within... 

Three magneto-plasmonic nanohybrids were synthesized using Au- and Ag-coated Fe3O4 nanoparticles (NPs)-modified dual pH- and temperature-responsive triblock copolymer of poly (butyl methacrylate-co-acrylamide-co-methacrylic acid) to serve as drug carriers with potential of using in both photothermal and controlled/targeted chemotherapies. The internal superparamagnetic core gives the carriers targeted-delivery characteristics, and surface plasmon resonance–based noble metallic Au/Ag shells give them on-demand photothermal and photo-triggering release properties. To investigate the effect of coating method on the targeting property of synthesized carriers, Au NPs were attached to the magnetic... 

New dual light/temperature-responsive nanocarriers were synthesized using bimetallic plasmonic Au-Ag and Ag-Au nanoparticles (NPs) as cores of vehicles which subsequently functionalized with an upper critical solubility temperature–based poly acrylamide-co-acrylonitrile using reversible addition-fragmentation chain transfer for spatiotemporally controlled chemo-photothermal synergistic cancer therapy. The bimetallic cores were assigned to sense wavelengths close to the localized surface plasmon resonance of monometallic NP shell to produce heat which not only can increase the surrounding temperature over the upper critical solubility temperature of polymer to open its valves and promote drug... 

A new multifunctional filtration membrane was prepared by twofold advantages of conventional polymeric-membrane as the supporting layer and magneto-plasmonic Ag-doped ZnO@Fe3O4/MWCNTs nanocomposite as the functional layer. Poly acrylic acid (PAA)-modified polyamide (PA) discs (PAA-PA) were applied to increase the hydrophilicity of prepared membrane and X-Ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were used for characterization. The grafting yield of PAA in the pores and on the surface of PA was 17 wt.% and weigh difference between PAA-PA membrane before and after modifying with the photocatalyst was 8.7 mg. The amount of photocatalyst loading in the prepared... 

Location-based services are becoming popular for mobile users. The mobile users' location plays a key role to provide the service from one side, but it can be considered as a dimension of their privacy and so necessary to keep it anonymous to the other parties. Since one important issue is to achieve an accurate service, it is important to use the mobile's accurate location. Using the location accurately raises some concerns on behalf of the user's privacy. One solution for meeting this requirement is using tickets by the means of a third party. The tickets should have some properties for not letting a mobile user to cheat and use the ticket more than one time. This paper proposes a protocol... 

A new photocatalytic filtration membrane was prepared by grafting of Ag–Au bi-plasmonic shell-on TiO2@Fe3O4 nanoparticles as a magnetically-separable heterogeneous photocatalyst to a poly acrylic acid-modified cellulose acetate membrane for decomposition and removal of methyl orange as a model pollutant from textile wastewater samples. Eight photocatalysts including five Au NPs-modified TiO2@Fe3O4 NPs and three Ag-Au bi-plasmonic NPs-decorated TiO2@Fe3O4 NPs with different shell thickness were synthesized and characterized by TEM, UV–vis, and SEM techniques and their photocatalytic activity was assessed using two radiation sources. After selection of optimum photocatalyst and modification of... 

Ultrahigh-molecular-weight polyethylene (UHMWPE)/fumed silica nanocomposites were prepared via in situ polymerization using a bi-supported Ziegler-Natta catalytic system. Nanocomposites with different nanoparticle weight fractions were produced in order to investigate the effect of fumed silica on thermal and mechanical properties of UHMWPE/fumed silica nanocomposites. The viscosity average molecular weight (M) of all samples including pure UHMWPE as the reference sample and nanocomposites were measured. Scanning electron microscope (SEM) images showed the homogenous dispersion of nanoparticles throughout the UHMWPE matrix while no nanoparticle cluster has been formed. Crystallization... 

In this study the extrudate swell of polymer solutions is estimated using the microstructure of polymer molecules. When a flexible polymer chain goes through a narrow die shear stress exerting on the chain will cause the polymer chain to be stretched along the flow direction. After emerging from die all external stresses vanish immediately and the chains tend to recover their previous state due to elastic recovery. This phenomenon will results in a gradual increase in extrudate diameter and this is used as the key idea for estimating swell ratio. A Giesekus based conformational model was used in order to predict polymer chains microstructure everywhere in the domain. The resulting PDE set... 

In this research, ultrahigh-molecular-weight polyethylene (UHMWPE)/multiwalled carbon nanotube (MWCNT) nanocomposites with different nanotube concentrations (0.5, 1.5, 2.5, and 3.5 wt %) were prepared via in situ polymerization with a novel, bisupported Ziegler-Natta catalytic system. Magnesium ethoxide [Mg(OEt) 2] and surface-functionalized MWCNTs were used as the support of the catalyst. Titanium tetrachloride (TiCl 4) accompanied by triethylaluminum constituted the Ziegler-Natta catalytic system. Preparation of the catalyst and the polymerization were carried out in the slurry phase under an argon atmosphere. Support of the catalyst on the MWCNTs was investigated with Fourier transform... 

In this study, the flow of a fiber filled viscoelastic matrix through planar contractions is investigated. It was found that by adding fiber to the matrix vortex, the intensity increases. Fiber orientation along "x" and "y" axes was studied too. It was found that fiber orientation could be used for determining the flow regime through the contraction geometry. The rigidity condition of fibers, which needs the trace of the orientation tensor to be unity everywhere in the domain, is correct except near walls and the reentrant corner, which is slightly less than one. In these regions, the stress magnitude is higher, which results in more numerical errors, and which further leads to some error in... 

Contraction flow is one of important geometries in fluid flow both in Newtonian and non-Newtonian fluids. In this study, flow of a viscoelastic fluid through a planar 4:1 contraction with rounded corners was investigated. Six different rounding ratios (RR =0, 0.125, 0.25, 0.375, 0.438, 0.475, 0.488) was examined using the linear PTT constitutive equation at creeping flow and isothermal condition. Then the resulting PDE set including continuity, momentum, and PTT constitutive equations were implemented to the OpenFOAM software. The results clearly show vortex deterioration with increasing rounding diameter, so that when rounding corner exceeds a critical value, the vortex disappears...