Loading...
Search for: ansari--mahmood
0.124 seconds

    Controlling Local Scour Due to Hydraulic Jump Using Oblique Buried Plates

    , M.Sc. Thesis Sharif University of Technology Borhani, Sanaz (Author) ; Borghei, Mahmood (Supervisor)
    Abstract
    Local scouring at the downstream of sluice gates in the erosive beds is one of the main concerns of hydraulic engineers because of the significant damage that it can cause to the hydraulic structures. It is important to control the local scour depth at downstream of hydraulic structures to ensure safety operation of these systems. Many researchers have conducted various studies to predict the maximum depth and diameter of scour hole and develop new methods in order to control this phenomenon. One way to overcome this problem is the use of apron, or non-erosive bed. In order to shorten the apron length or decrease the effect of the... 

    Experimental Study of Pressure Fluctuation in Two Phase Slug Flow In a Tunnel with Rectangular Cross Section with an Expansion Transition and Horizontal Slope

    , M.Sc. Thesis Sharif University of Technology Jalilvand, Ehsan (Author) ; Borghie, Mahmood (Supervisor)
    Abstract
    Air enterance in to flowing water is something that is commonly seen in the water conveyance systems. The mixture of Air and water that flow together create a kind of flow that is called two phase flow. This kind of flow is often seen in culverts and water conveyance systems. There are different flow patterns in two phase flow. Considering pressure fluctuation, pressure drop and pressure recovery, slug flow pattern is the most complicated pattern among all.
    Sometimes a singularity is used in a tunnel; one of the singularities that are frequently used in water conveyance system is expansion transition. In this study an experimental setup is used to model two phase slug flow, which passes... 

    Performance Analysis and Optimization of Optically Steered Arrayed Antennas with Gratings

    , Ph.D. Dissertation Sharif University of Technology Shabani, Mostafa (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    It is well known that arrays of antennas make it possible to steer the radiation pattern without steering a physical structure. For the past few decades this has been considered for many civil and military communication systems. Recently, ultra-short pulses are considered for high resolution radars and ultra-wideband communication systems. Systems with short pulses and large antenna arrays may benefit from high resolution in both temporal and spatial domains. But the implementation of the ultra-wideband feeding circuits for such antenna arrays is a hard job even with state of the art electronics. Optical technology has been applied, successfully, to a number of radio applications such as... 

    Laboratory Investigation For Unsymmetric Rectangular Weir

    , M.Sc. Thesis Sharif University of Technology Aghazadeh, Pooya (Author) ; Borghei, Mahmood (Supervisor)
    Abstract
    Sharp crested weirs are one of the main and oldest means of measuring discharge in water conveyance systems. Many studies have been done on sharp rectangular weirs and have provided many relationships regarding the effect of geometric parameters and various factors on discharge coefficient of the weirs.In some places, due to existence of obstacles or barriers in the channel, it is impossible to create a symmetrical continuous weir some other cases,multiple or asymmetric weirs should be used, which is the main concept of this project.Since it seems unlikely that a purely mathematical model can review the impact of the multiplicity and asymmetry of these weirs without using empirical... 

    Optimization of Maximum Frequency and Power, Extraction of Parameter Data and Final Publication Design of High Power Microwave Pulse Generation Using nonlinear Transmission Line with the Periodic Structure of the Gas Switch

    , M.Sc. Thesis Sharif University of Technology Komeylian, Saeed (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    High-power (108 – 109 W) RF pulses with a carrier frequency of C band and a duration of several oscillation periods can be produced through direct energy conversion of a travelling high-voltage pulse with the use of nonlinear elements.
    Nonlinear transmission lines consist either of lumped nonlinear elements and provide spatial dispersion of excited oscillations or of elements uniformly distributed on a certain line segment. The first type of NLTL’s can be referred to NLTL’s with spatial dispersion. The second type of NLTL’s is ensemble of nonlinear oscillators with a characteristic natural frequency and temporal dispersion. In the first case, the duration of electromagnetic pulses is... 

    An Estimation Model for Computation and Control of Trajectory Coverage Error in Additive Manufacturing

    , M.Sc. Thesis Sharif University of Technology Zargar, Farinaz (Author) ; Houshmand, Mahmood (Supervisor)
    Abstract
    During 1980s Additive Manufacturing technologies for the purpose of prototyping with fast and less expensive, under the name of Rapid Prototyping was invented. But nowadays under the vast progress made in this field, it possesses a notable place in different industries such as automobile manufacturing, aerospace, architecture, medicine and so on for part manufacturing. In all AM machines, the CAD model design part is manufactured by adding layered to each other. In this research, at first by explaining manufacturing process and current different technologies, the place of this manufacturing process in today and future industry, is analyzed. For discussing replacement of this method instead... 

    Analysis and Simulation of Micrometre-scale Silicon Electro-optic Modulators Based on Ring Resonators

    , M.Sc. Thesis Sharif University of Technology Jafari, Omid (Author) ; Akbari, Mahmood (Supervisor)

    Improving Efficiency of Labyrinth Side Weirs Using Asymmetric Geometry

    , M.Sc. Thesis Sharif University of Technology Parvaneh, Ali (Author) ; Borghei, Mahmood (Supervisor)
    Abstract
    One of the most important methods of controlling discharge in water industry which is widely used in irrigation, water distribution, waste-water engineering, drainage, flood control and other water related projects, is side weir. The hydraulic behavior of flow over side weir is spatially varied flow with decreasing discharge. Various investigators have related the weir discharge coefficient as a function of main channel upstream Froude number and the fraction of weir height to upstream depth . Performance of sharp crested side weirs with extended length (as labyrinth side weir with asymmetric geometry) has been studied in this thesis. The variables for this study are height of weir ,... 

    Analysis and Design of Nanoantenna Arrays

    , M.Sc. Thesis Sharif University of Technology Dehmollaian, Ayyoub (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    If the size of the conventional telecommunication antennas -that are widely used in transmitting broadcasted radio and TV messages- is reduced by a nanometer size these antennas can be used at optical frequencies. Dimensions of these optical nanoantennas -that made of nanoparticles with highly permittivity- can be smaller than half of the wavelength. Based on this capability, optical nanoantennas have some important applications such as optical communication, photovoltaic devices, non-classical light, and optical sensing. After studying on optical nanoantennas and their features, in this project, we present distinctions between optical NAs and MW antennas and then investigate about different... 

    Optimized Design of Switch Circuit and Receiver Antenna in the Field of Fifth Generation Telecommunications to Reduce the Fading Effect

    , M.Sc. Thesis Sharif University of Technology Bakhshi, Mehran (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    The Deep Fading Effect is a destructive factor in communication systems, one of the solutions to eliminate it is the use of Diversity, and there are two types of indicators of Diversity, Spatial Diversity and Polarization Diversity. Spatial Diversity is a common method to reduce the Fading Effect while increasing the cost and increasing the volume of the communication station, which to optimize the cost and reduce the volume of the communication station, the Polarization Diversity Structure is added to the telecommunication system. To apply Spatial Diversity, several Antennas with different Polarizations are used, which The most common method in mobile telecommunication station systems is... 

    Designing a New System for Proposing a Suitable Computer System for Customers Using Cloud Computing and Service Composition

    , M.Sc. Thesis Sharif University of Technology Mousavi, Danial (Author) ; Hushmand, Mahmood (Supervisor)
    Abstract
    Cloud computing has brought about many changes in the new business arena. These changes do not only include technological changes, but have penetrated the business models of many companies. For example, in recent years, many companies have migrated from their former systems to cloud computing for reasons such as easy and low-cost access to high-performance hardware and software systems, and to avoid maintenance and repair costs and security costs.Due to the economic conditions in recent years and the high cost of electronic items, the criterion of purchase price has become much more important than in the past among people when buying such goods. Now in the Iranian electronics market,... 

    Design and Improvement of Meta-Surface Based MIMO Antennas for 5G Millimeter Wave

    , M.Sc. Thesis Sharif University of Technology Molavi, Mehran (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    Wireless communication systems play a pivotal role in the daily lives of individuals. Given the escalating demand for higher data rates and enhanced reliability, there is an imperative need for cutting-edge communication technologies. Rigorous research is being conducted in these systems to refine and optimize antenna structures, aiming at augmenting performance, escalating data transmission rates, and mitigating interference. Microstrip antenna structures have garnered considerable attention due to their diminutive dimensions, adaptability to planar and non-planar surfaces, simplistic design, cost-effectiveness, and mechanical resilience. These antennas, featuring diverse patch shapes,... 

    Design and Implementation of an Audio Steganography System on FPGA

    , M.Sc. Thesis Sharif University of Technology Ebrahimabadi, Mohammad (Author) ; Tabandeh, Mahmood (Supervisor)
    Abstract
    In recent years, along with development of technology and decrease in size of digital devices, copying and editing of digital multimedia products has become easier. Also, broadband technology caused simpler distribution of data. Considering above mentioned problems, we can use watermarking. Nowadays, watermarking has many applications such as secure transmission of data, owner identification, proof of ownership, authentication, broadcast monitoring etc. Watermarking is the process of hiding information in a secure host, in a way that it does not change the quality of signal. Watermarking is the science and art of hiding secret information in which neither the sender nor the receiver would... 

    Analysis of Wave Propagation Eigenproblem in Periodic Structures

    , Ph.D. Dissertation Sharif University of Technology Faghihifar, Ehsan (Author) ; Akbari, Mahmood (Supervisor)
    Abstract
    The Fourier modal method is one of the most important methods in the analysis of flat periodic structures (gratings). Using this method, the problem of wave propagation in the periodic medium leads to an eigenproblem, in which eigenvalues represent the propagation constants and eigenvector or eigenfunctions determine the filed distribution of the modes. On the other side, considering all the generalizations and modifications reported so far, the Fourier modal method still faces two fundamental problems. First, for problems involving large dielectric constants or high contrasts, the matrix form of the eigenproblem (the modal matrix) can be large, dense, and require a high computational cost.... 

    Optimization of supercritical carbon dioxide extraction of essential oil from spearmint (Mentha spicata L.) leaves by using Taguchi methodology

    , Article Journal of Supercritical Fluids ; Volume 67 , July , 2012 , Pages 123-130 ; 08968446 (ISSN) Ansari, K ; Goodarznia, I ; Sharif University of Technology
    2012
    Abstract
    In this study, the essential oil of aerial parts species of a plant called Spearmint was extracted by CO 2 to optimize the results of the supercritical extraction process. In order to achieve maximum total yield extraction and SF-CO 2 concentration, tests were done in a laboratorial pilot considering the Taguchi method under following condition: pressure. 90,100,140,170 bar, temperature. of 35, 40, 45, 50 °C, mean particles size: 250,500,710,1000 μm, flow rate 1,3,5,8 ml/s and dynamic time 30,50,90,120 min. The optimizing conditions for SCE and SF-CO 2 concentration are: 90 bar, 45 °C, 500 μm, 5 ml/s, 120 min and 90 bar, 35 °C, 250 μm, 1 ml/s, 30 min. SCE total yield and CO 2 concentration... 

    The effects of geometrical parameters on force distributions and mechanics of carbon nanotubes: A critical study

    , Article Communications in Nonlinear Science and Numerical Simulation ; Volume 14, Issue 12 , 2009 , Pages 4246-4263 ; 10075704 (ISSN) Ansari, R ; Motevalli, B ; Sharif University of Technology
    2009
    Abstract
    In this paper, using the continuum approximation together with Lennard-Jones potential, a new semi-analytical expression is given to evaluate the van der Waals interaction between two single-walled carbon nanotubes. Based on this expression, two new formulations are also proposed to model multi-walled carbon nanotubes. In the first one, the interactions between each pair of shells from the inner and outer tubes are summed up over all of the pairs, whereas in the second formulation, a set of correction factors are applied to convert the results of double-walled carbon nanotubes to the correlated multi-walled ones. With respect to the present formulations, extensive studies on the variations... 

    Modelling and economic evaluation of pressure-retarded osmosis power plant case study: Iran

    , Article International Journal of Ambient Energy ; 2017 , Pages 1-13 ; 01430750 (ISSN) Ansari, A ; Abbaspour, M ; Sharif University of Technology
    2017
    Abstract
    In recent years, a growing interest in investigation of new energies has been observed. Pressure-retarded osmosis (PRO) could be a feasible source of renewable energy. This study aims to present a model based on the present technology of PRO power plant components for design and economic evaluation of a PRO power plant, and to investigate case studies in order to demonstrate how each main component of a PRO power plant affects the economic evaluation. Therefore, all the mechanisms including intake and outfall systems, pre-treatment system, membrane system, and transportation and generation systems are explicated and meant to present the capability of the model to design the PRO power plant.... 

    Modelling and economic evaluation of pressure-retarded osmosis power plant case study: Iran

    , Article International Journal of Ambient Energy ; Volume 40, Issue 1 , 2019 , Pages 69-81 ; 01430750 (ISSN) Ansari, A ; Abbaspour, M ; Sharif University of Technology
    Taylor and Francis Ltd  2019
    Abstract
    In recent years, a growing interest in investigation of new energies has been observed. Pressure-retarded osmosis (PRO) could be a feasible source of renewable energy. This study aims to present a model based on the present technology of PRO power plant components for design and economic evaluation of a PRO power plant, and to investigate case studies in order to demonstrate how each main component of a PRO power plant affects the economic evaluation. Therefore, all the mechanisms including intake and outfall systems, pre-treatment system, membrane system, and transportation and generation systems are explicated and meant to present the capability of the model to design the PRO power plant.... 

    An optimal Liouville-Type Theorem for Radial Entire Solutions of the Porous Medium Equation with Source

    , M.Sc. Thesis Sharif University of Technology Ansari, Hajar (Author) ; Hesaraki, Mahmoud (Supervisor)
    Abstract
    In this thesis , we consider nonnegative (continuous) weak solutions of the porous medium equation with source , u_t-∆u^m=u^p, and p>m>1 .
    Assume that, m>1 and 1< p/m u_t-∆u^m=u^p,xϵR^n ,tϵR
    has no nontrivial, bounded radial solutions u≥0 .
    In one space-dimensional, the conclusion of the result mentioned above remains true without the assumption of the radial symmetry. The proof is based on the intersection-comparison arguments , zero number argum- ents and a key step is to show the... 

    Feasibility Study of Manufacturing of Disposable Plant Containers

    , M.Sc. Thesis Sharif University of Technology Ansari, Mahmood (Author) ; Mostafavi, Mostafa (Supervisor)
    Abstract
    Although laws vary in the competitive business world of today and the changing supply and demand parameters show that the process of delivering new products to market is very important.Most organizations today have found that spending more than ever on trusting in traditional competitive levers such as quality, cost reduction and differentiation in selling more products and services are not enough to be successful in market, instead notions such as speed, flexibility andagility can have a significant trend toward offering new products and services. There aresome good reasons for knew that organizations need new ways to develop their new products to survival, compete with its competitors and...