Loading...
Search for:
ardakani--arash
0.14 seconds
Total 172 records
Hegel's ontology of power : the structure of social domination in capitalism
, Book
Cambridge University Press
2020
An efficient max-log MAP algorithm for VLSI implementation of turbo decoders
, Article Proceedings - IEEE International Symposium on Circuits and Systems, 24 May 2015 through 27 May 2015 ; Volume 2015-July , 2015 , Pages 1794-1797 ; 02714310 (ISSN) ; 9781479983919 (ISBN) ; Shabany, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
Long term evolution (LTE)-advanced aims the peak data rates in excess of 3 Gbps for the next generation wireless communication systems. Turbo codes, the specified channel coding scheme in LTE, suffers from a low-decoding throughput due to its iterative decoding algorithm. One efficient approach to achieve a promising throughput is to use multiple Maximum a Posteriori (MAP) cores in parallel, resulting in a large area overhead, a big drawback. The scaled Max-log MAP algorithm is a common approach to implement the MAP algorithm due to its efficient architecture with its acceptable performance. Although many works have been reported to reduce the area of the MAP unit, an efficient VLSI...
A novel area-efficient VLSI architecture for recursion computation in LTE turbo decoders
, Article IEEE Transactions on Circuits and Systems II: Express Briefs ; Volume 62, Issue 6 , 2015 , Pages 568-572 ; 15497747 (ISSN) ; Shabany, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
Long-term evolution (LTE) is aimed to achieve the peak data rates in excess of 300 Mb/s for the next-generation wireless communication systems. Turbo codes, the specified channel-coding scheme in LTE, suffer from a low-decoding throughput due to its iterative decoding algorithm. One efficient approach to achieve a promising throughput is to use multiple maximum a posteriori (MAP) cores in parallel, resulting in a large area overhead. The two computationally challenging units in an MAP core are α and β recursion units. Although several methods have been proposed to shorten the critical path of these recursion units, their area-efficient architecture with minimum silicon area is still missing....
A low-complexity fully scalable interleaver/address generator based on a novel property of QPP interleavers
, Article Proceedings - IEEE International Symposium on Circuits and Systems, 28 May 2017 through 31 May 2017 ; 2017 ; 02714310 (ISSN) ; 9781467368520 (ISBN) ; Shabany, M ; Sharif University of Technology
2017
Abstract
5-th generation mobile networks aim the peak data rates in excess of few Gbs, which may appear to be challenging to achieve due to the existence of some blocks such as the turbo decoder. In fact, the interleaver is known to be a major challenging part of the turbo decoder due to its need to the parallel interleaved memory access. LTE uses Quadratic Permutation Polynomial (QPP) interleaver, which makes it suitable for the parallel decoding. In this paper, a new property of the QPP interleaver, called the correlated shifting property, is theoretically proved, leading to a fully scalable interleaver and a low-complexity address generator for an arbitrary order of parallelism. The proposed...
VLSI Architecture of Turbo Decoder for LTE
, M.Sc. Thesis Sharif University of Technology ; Shabany, Mahdi (Supervisor)
Abstract
Long Term Evolution (LTE) aims the peak data rates in excess of 300 Mb/s, which may appear to be challenging to achieve due to the existence of some blocks such as the turbo decoder. One efficient approach to achieve this throughput is by parallelizing the Log Maximum a Posteriori (MAP) algorithm in the turbo decoder. In fact, the interleaver is known to be a major challenging part of the turbo decoder due to its need to the parallel interleaved memory access. LTE uses Quadratic Permutation Polynomial (QPP) interleaver, which makes it suitable for the parallel decoding. In this thesis, first, we propose an efficient architecture for the QPP interleaver, called the Add-Compare-Select (ACS)...
About Space Time
, M.Sc. Thesis Sharif University of Technology ; Rastegar, Arash (Supervisor)
Abstract
Einstein's general theory of relativity is an admirable successful and unifier geometrical modeling among concepts of space, time and gravity. This theory along with special theory of relativity made a massive change in our physical view and this, especially in its historical context, has deep and interesting consequences in man's philosophical viewpoint which can be studied. Some parts of this thesis relates to these consequences. Some of these interesting consequences may be hidden by computional or mathematical viewpoint and often these equations do not contain enough intuition. in one part, we provide a formulizatin of Einstein's equaion that is intuitional which can be translated in...
Tropical Algebraic Geometry
, M.Sc. Thesis Sharif University of Technology ; Rastegar, Arash (Supervisor)
Abstract
Tropical algebraic geometry is a fairly new branch in geometry which is called so in honor of Brazilian mathematician Imre Simon who was pioneer of this field.The set equipped with the addition and multiplication is a semifield.Algebraic geometry objects like algebraic varieties can be defined over.Polynomials and rational functions are defined over.The functions that they define are piecewise linear and concave functions and the set of points where they are nonlinear is a tropical variety which is a concave polyhedral. Thus, tropical algebraic geometry is a piecewise linear version of algebraic geometry.Another approach to tropical algebraic geometry comes back to the works of Russian...
Evaluating the Effect of Crumb Rubber on the Fracture Properties of Asphaltic Materials Using a Standardized Composite
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Fatigue cracking has a major impact on the performance of flexible pavements. Many test methods have been established to evaluate and estimate the fatigue life of asphaltic materials. Most of these test methods cannot successfully examine the fatigue properties of asphaltic materials. Recent studies demonstrate that using a standardized composite, which consists of glass beads and asphalt binder, can simulate the stress states that binder experiences in the field. This research used standardized composite to investigate the effect of crumb rubber on the fracture properties of asphaltic materials. To validate the test results, the authors conducted fracture tests on the Fine Aggregate Matrix...
Novel View Synthesis Using Light Field Camera
, M.Sc. Thesis Sharif University of Technology ; Amini, Arash (Supervisor)
Abstract
In the last two decades, novel view synthesis has become increasingly important in the movie and game industries. The new generated views correspond to virtual viewpoints, where no real camera has taken snapshot. Depending on the amount of available information from the scene, different approaches have been proposed to create novel views. If the depth information is available, then by knowing camera relative motion, novel views can be constructed. The conventional cameras only record the intensity of the captured scene, and discard the depth information. In the recent concept of light field cameras, by locating an array of micro-lenses between the camera sensor and the main lens, one can...
Developing a New Method to Evaluate and Quality Control of Chip Seal
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Chip seal is one of the most economical pavement maintenance practice that extends pavement life. To ensure chip seal good performance several quality control methods have been developed. However, most of these methods are qualitative and only measure the stone loss under a certain number on loading. This research developed a new method for quality control of chip seal, based on the assumption that characteristics of the bond between chips and pavement surface play a key role in chip seal performance. To validate this test method, the authors used a wheel track loading test. The results from this research clearly showed that the characteristics of the bond between chips and pavement surface...
Investigating the Effect of Various Additives on the Curing Time of Chip Seal and Chip Seal Treatments in Different Climate Conditions.
,
M.Sc. Thesis
Sharif University of Technology
;
Motamed, Arash
(Supervisor)
Abstract
Recently, a new method to investigate chip seal performance has developed by a research team at Sharif University of Technology. This study investigates the effect of various additives such as CRM, SBR Latex, Hydrated Lime and Ordinary Portland Cement (OPC), on the curing time of chip seal by this method. In addition, the chip seal treatments were investigated in different climate conditions like Wet and Wet-Freeze zones. The overall performance of mixture specimens evaluated using creep loading test. In fact, the bonding properties between aggregates and surface of Hot Mix Asphalt measured. The test results were analyzed by using of the work and time parameters. These parameters were...
Brandom’s Conception of Trust
, M.Sc. Thesis Sharif University of Technology ; Abazari, Arash (Supervisor)
Abstract
A Spirit of Trust results from Brandom's thirty-year effort to give a pragmatistic reading of Hegel's Phenomenology of Spirit. In A Spirit of Trust, Brandom reformulates Hegel's arguments in the language of contemporary Analytical Philosophy and gives a unique interpretation of Hegel's key concepts. In this Thesis, we will examine one of its key concepts, namely, Trust; We will pursue the following questions: First, What is Trust? And what is its connection to other aspects of Brandom's philosophy? Second, How does Trust help us in overcoming Alienation? Third, Are Confession and Forgiveness, which are the constitutive concepts of Trust, psychologistic or normative? Fourth, What is the...
Design of Stress Absorbing Membrane Interlayer (Sami) and Overlay to Reduce Reflective Cracking
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Cracks or construction joints in an overlayed pavement can propagate into the overlay over time due to various factors, the most important of which are traffic and temperature loading, and cause premature failure of pavement. This propagated cracks are called reflective cracks and the phenomenon of crack propagation into the overlay is called reflective cracking. Use of stress-absorbing membrane interlayers (SAMI) is one of the ways can reduce the occurrence of reflective cracking and/or delay it. One of the most common SAMIs is an asphalt mixture consists of bitumen and aggregate layed down between the old and the veneer layers. The function of the SAMI depends on several factors such as...
An Investigation on the Effect of Filler Type and Content on the Performance of Asphaltic Materials
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
The objective of this research is evaluating the effect of filler type and content on the characteristics of asphaltic materials. The properties of the asphalt mixture are greatly influenced by its components. As asphalt mixtures are composed of two prominent components, aggregates and binder, the change in type and contents of these materials may lead to altering the performance of asphalt mixtures. Aggregates in the asphalt mixtures are categorized into three groups based on their particle sizes: coarse aggregate, fine aggregate and mineral filler. The effect of filler on the characteristics of asphalt mixtures can be examined by changing the type and content of filler and holding the...
The Analysis of HDR Video Reconstruction Methods
, M.Sc. Thesis Sharif University of Technology ; Amini, Arash (Supervisor)
Abstract
The conventional cameras and displays do not have the ability to record and display the full brightness of the world around us. These deficiencies have led to the development of methods known as High Dynamic Range Imaging. Most of the work done in this field falls into two groups: compression of the light range and its expansion. In compression, the brightness range is intended to display content with a high dynamic range in simple displays. But the goal of expanding the brightness range is to reconstruct HDR content from a low dynamic range one. In addition to the above classification, this field is also categorized based on the type of content (image or video). In this study, the...
Investigating Different Crumb Rubber Modification Methods in Cold Mix Asphalts
, M.Sc. Thesis Sharif University of Technology ; Motamed, Arash (Supervisor)
Abstract
Studies have shown that use of crumb rubber additive can improve the mechanical and performance properties of hot mix asphalts. Nowadays, different methods are used for adding crumb rubber to asphalt mixtures. However, no comprehensive research has been done to investigate the effects of these different methods in cold mix asphalts. In this research, different crumb rubber modification methods were evaluated to compare their effects on cold mix asphalts’ performance. In this regard, various crumb rubber modification methods, such as pre blending crumb rubber into the asphalt before emulsification, post blending crumb rubber into the prepared asphalt emulsion and blending crumb rubber with...
Scene Reconstruction Using Light Field Camera
, M.Sc. Thesis Sharif University of Technology ; Amini, Arash (Supervisor)
Abstract
Nowadays in movie and photography industry, scene reconstruction is of high importance. Capturing data containing the depth information of the scene can help us achieve this goal more easily. Ordinary Cameras do not record depth information of the scene so they can’t ease our task. In 2005, some Stanford Researchers, inspired by Adelson’s work, were able to build the first camera that captures depth information. They called it the light filed camera. In these cameras an array of microlenses is inserted below the main lens. By doing this the camera is able to capture the rays’ intensities and their directions in space too. With this kind of information, we are able to obtain the depth of a...
Graph Learning on Images using Kron-Reduction
, M.Sc. Thesis Sharif University of Technology ; Amini, Arash (Supervisor)
Abstract
In this project, we are going to face the problem of learning a graph on images with big sizes which has many applications in image processing like image segmentation. There are two main obstacles to doing so. One is the fact that the task of graph learning becomes immensely time-consuming when we have a large number of nodes. The other is the memory shortage since most computers do not have rams with big capacities, which is a requirement when the number of nodes is too high. We are going to suggest two suboptimal solutions for finding a sparse graph on images with respect to smoothness criteria on the Laplacian matrix of the acquired graph and reduce the time needed for this task. Then we...
, M.Sc. Thesis Sharif University of Technology ; Rastegar, Arash (Supervisor)
Abstract
Our goal is to reformulate MKR-dictionary for geodesic foliations on hyperbolic 3-manifolds. Where the closed geodesic is considered as a knot. In this new perspective, by topological interpretation at arithmetical objects and considering the etale fundamental group, the ground has been prepared to obtain an analogy between the theory of knots and the algebraic numbers theory. The analogy between knots and prime numbers was pointed out by B. Mazur and also by Y. Manin and developed by the work of Kapranov and Reznikov. Using this analogy, Mazur formulated the Chebotarev density theorem related to prime numbers in number fields for an infinite sequence of knot on a three-dimensional manifold,...
Disease Classification Based on Graph Learning using fMRI Datasets
, M.Sc. Thesis Sharif University of Technology ; Amini, Arash (Supervisor)
Abstract
In the past few years, the available knowledge in graph-based processing has made significant progress, and as a result, powerful tools have been created. In this regard, graph learning with the assumption of data smoothness on the final result can be considered a successful example. Briefly, in graph learning, to describe the relationship between the problem components, a graph is learned using the available data whose nodes represent the problem components, and its edges represent how much these components are connected. The usefulness of this method lies in the possibility of using the obtained graph as the input to currently known methods of classification and achieving better results...