Loading...
Search for:
asadi--benyamin
0.155 seconds
Total 303 records
A uniquely 3-list colorable, planar and k4-free graph
, Article Journal of Combinatorial Mathematics and Combinatorial Computing ; Volume 72 , 2010 , Pages 115-120 ; 08353026 (ISSN) ; Sharif University of Technology
2010
Abstract
Let G be a graph with v vertices. If there exists a collection of list of colors S1, S1,..., Sv on its vertices, each of size k, such that there exists a unique proper coloring for G from this list of colors, then G is called a uniquely k-list colorable graph. In this note we present a uniquely 3-list colorable, planar and K4-free Graph. It is a counterexample for a conjecture by Ch. Eslahchi, M. Ghebleh and H. Hajiabolhassan [3]
Evaluating Reliability of SSDs Against Power Outage
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
Solid-State Drives (SSDs) provide high performance, low power consumption, and hence are widely used in the I/O cache of enterprise storage systems and high performance servers. Although employing high performance SSDs in the I/O cache of storage systems significantly improves system performance, it comes with significant reliability threats for write operations upon power failures. In order to provide high level of reliability, storage architectures employ SSDs in I/O cache with RAID-1 configuration, however, such configuration only partially mitigates the reliability issues of the SSDs. In this thesis, we analyze the reliability of SSD-based I/O caches against power outage and high...
Multi directional forging of 2024 Al alloy after different heat treatments: Microstructural and mechanical behavior
, Article Transactions of the Indian Institute of Metals ; 2016 , Pages 1-13 ; 09722815 (ISSN) ; Kazeminezhad, M ; Sharif University of Technology
Springer India
2016
Abstract
Improvement of mechanical properties and microstructure of 2024 aluminum alloy by performing a severe plastic deformation method, called multidirectional forging (MDF), and heat treatment was the aim of this research. In this work, the effects of different heat treatments such as annealing, solid solution, peak ageing and over ageing before MDF on mechanical properties and microstructure of the alloy were studied. Microstructure evolution during severe plastic deformation was considerably affected by the precipitates and non-shearable particles. On the other hand, the severe plastic deformation had different effects on precipitates in the microstructure. Fragmentation, scattering and...
Utilizing mixed methods research in analyzing Iranian researchers' informarion search behaviour in the web and presenting the current pattern
, Article Iranian Journal of Information Processing Management ; Volume 31, Issue 1 , 2015 , Pages 27-57 ; 22518223 (ISSN) ; Hariri, N ; Sharif University of Technology
Iranian Research Institute for Scientific Information and Documentation
2015
Abstract
Using mixed method research the current study has analyzed Iranian researchers' information searching behavior on the Web. Based on extracted concepts, the model of their information searching behavior was revealed. Forty-four participants, including academic staff from universities and research centers were recruited for this study selected by purposive sampling. Data were gathered from questionnaires including ten questions and semi-structured interview. Each participant's memos were analyzed using grounded theory methods adapted from Strauss & Corbin (1998). Results showed that the main objectives of subjects were doing a research, writing a paper, studying, doing assignments, downloading...
The relationship between the research activity of Iranian medical universities and their web impact factor
, Article Electronic Library ; Volume 27, Issue 6 , 2009 , Pages 1026-1043 ; 02640473 (ISSN) ; Shekofteh, M ; Sharif University of Technology
2009
Abstract
Purpose - The aim of this paper is to look at the relationship between research in Iranian medical universities, together with their Web Impact Factor (WIF). Design/methodology/approach - The Altavista search engine was chosen because of its advanced search facilities for counting links and having a wider scope of academic web sites than other search engines. It was searched for determining the number of pages, in-links and self-links of 42 web sites of Iranian medical universities. The Web Impact Factor (WIF) was calculated by two formulas and the relationship between the two grades of universities (WIF and ISI) was calculated by using the Spearman's correlation coefficient. Findings -...
Multi directional forging of 2024 Al alloy after different heat treatments: microstructural and mechanical behavior
, Article Transactions of the Indian Institute of Metals ; Volume 70, Issue 7 , 2017 , Pages 1707-1719 ; 09722815 (ISSN) ; Kazeminezhad, M ; Sharif University of Technology
2017
Abstract
Improvement of mechanical properties and microstructure of 2024 aluminum alloy by performing a severe plastic deformation method, called multidirectional forging (MDF), and heat treatment was the aim of this research. In this work, the effects of different heat treatments such as annealing, solid solution, peak ageing and over ageing before MDF on mechanical properties and microstructure of the alloy were studied. Microstructure evolution during severe plastic deformation was considerably affected by the precipitates and non-shearable particles. On the other hand, the severe plastic deformation had different effects on precipitates in the microstructure. Fragmentation, scattering and...
Marker-less versus marker-based driven musculoskeletal models of the spine during static load-handling activities
, Article Journal of Biomechanics ; Volume 112 , 2020 ; Arjmand, N ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Evaluation of workers’ body posture in workstations is a prerequisite to estimate spinal loads and assess risk of injury for the subsequent design of preventive interventions. The Microsoft Kinect™ sensor is, in this regard, advantageous over the traditional skin-marker-based optical motion capture systems for being marker-less, portable, cost-effective, and easy-to-use in real workplaces. While several studies have demonstrated the validity/reliability of the Kinect for posture measurements especially during gait trials, its capability to adequately drive a detailed spine musculoskeletal model for injury risk assessments remains to be investigated. Lumbosacral (L5-S1) load predictions of a...
Alteration of initial and residual healing potential of asphalt binders due to aging, rejuvenation, and polymer modification
, Article Road Materials and Pavement Design ; 2020 ; Tabatabaee, N ; Sharif University of Technology
Taylor and Francis Ltd
2020
Abstract
Asphalt binders are known to exhibit an inherent ability to repair damage. Such self-healing potentially affects the fatigue damage performance of bituminous materials. There are contradicting findings about the effects of aging and polymer modification on healing. The effectiveness of rejuvenating agents also has not been sufficiently addressed. In the present study, three healing indices have been defined to provide a more complete representation with which to quantify the healing potential of binders. These indices have been defined using damage characteristic curves derived from interrupted linear amplitude sweep tests. Initial healing (IH) describes the immediate reduction in the damage...
Investigation of the gamma-ray shielding performance of the B2O3-Bi2O3-ZnO-Li2O glasses based on the monte carlo approach
, Article Radiation Physics and Chemistry ; Volume 189 , 2021 ; 0969806X (ISSN) ; Hosseini, A ; Sharif University of Technology
Elsevier Ltd
2021
Abstract
The purpose of this article is to investigate the shielding performance of the B2O3-Bi2O3-ZnO-Li2O glasses against the gamma-ray. To this end, the attenuation parameters of the gamma-ray inside the B2O3-Bi2O3-ZnO-Li2O glasses were evaluated in the energy range of 200–1500 keV. It was found that the mass attenuation coefficient of the composites increases with increasing the Li2O content. The relative percent deviation between the results of simulation using the MCNPX and XCOM database in most cases was less than 2%. Additionally, the Mean Free Path (MFP) and Half-Value Layer (HVL) parameters were evaluated, and the shielding efficiency of samples was compared with some conventional shielding...
MDA-based methodologies: An analytical survey
, Article 4th European Conference on Model Driven Architecture - Foundations and Applications, ECMDA-FA 2008, Berlin, 9 June 2008 through 13 June 2008 ; Volume 5095 LNCS , 2008 , Pages 419-431 ; 03029743 (ISSN); 3540690956 (ISBN); 9783540690955 (ISBN) ; Ramsin, R ; Sharif University of Technology
Springer Verlag
2008
Abstract
Model-Driven Development (MDD) has become a familiar software engineering term in recent years, thanks to the profound influence of the Model Driven Architecture (MDA). Yet MDD, like MDA itself, defines a general framework, and as such is a generic approach rather than a concrete development methodology. Methodology support for MDA has been rather slow in coming, yet even though several MDA-based methodologies have emerged, they have not been objectively analyzed yet. The need remains for a critical appraisal of these methodologies, mainly aimed at identifying their achievements, and the shortcomings that should be addressed. We provide a review of several prominent MDA-based methodologies,...
Alteration of initial and residual healing potential of asphalt binders due to aging, rejuvenation, and polymer modification
, Article Road Materials and Pavement Design ; Volume 23, Issue 2 , 2022 , Pages 287-307 ; 14680629 (ISSN) ; Tabatabaee, N ; Sharif University of Technology
Taylor and Francis Ltd
2022
Abstract
Asphalt binders are known to exhibit an inherent ability to repair damage. Such self-healing potentially affects the fatigue damage performance of bituminous materials. There are contradicting findings about the effects of aging and polymer modification on healing. The effectiveness of rejuvenating agents also has not been sufficiently addressed. In the present study, three healing indices have been defined to provide a more complete representation with which to quantify the healing potential of binders. These indices have been defined using damage characteristic curves derived from interrupted linear amplitude sweep tests. Initial healing (IH) describes the immediate reduction in the damage...
Performance Enhancement of Enterprise Storage Systems Using a Markov-Based Prefetching Method
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
With increasing rate of digital information in the world, design, configuration, and networking of enterprise storage systems has become an essential part in designing data centers. The performance of data storage systems in serving incoming requests is one of the major parameters of such systems. A major metric to measure performance is response time. This parameter is, in particular, crucial in enterprise applications such as financial, credit, multimedia, and real-time applications. A common approach to enhance the performance of enterprise storage systems is improving the hit ratio of the system global memory using prefetching technique. Using prefetching technique, a data block is...
Management of Storage Resources, Power, and Performance in Enterprise Storage Systems Using Prefetching Method
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
Nowadays, enterprise storage systems are widely used in data centers such as databases, servers, and bank institutes. Due to mechanical activity of disk drives, these systems are one of the most power consumptive components in data centers. Prefetching and RAID, which are employed to enhance performance, are widely used in data storage systems. These two methods, however, impose significant energy overhead to the system due to the increased disk activity. In this thesis, we first elaborate shortcomings of prefetching and RAID methods. Then, we propose a new energy efficient and RAID-compatible prefetching method (LPTAP), which aims at improving performance and energy consumption. To evaluate...
Evaluation of Seismic Criteria and Random Parameters on Fragility Curves of RC Frames
, Ph.D. Dissertation Sharif University of Technology ; Bakhshi, Ali (Supervisor)
Abstract
There are many parameters which are utilized to obtain a more reasonable performance for structures under earthquake excitations in seismic provisions. It is well recognized that the main character to design of structures under seismic excitation is probabilistic rather than deterministic; therefore, it should be determined if the probability of structural damages is decreased when such parameters change in design of structures. In this thesis, fragility curves are developed in order to evaluate these parameters. Fragility curves are employed for various probability parameters. These diagrams are utilized to demonstrate when a coefficient or a number of parameters are used to improve...
Evaluating Availability of Backend Logic in Enterprise Storage Systems
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
Data storage systems are an essential part of any Information Technology (IT) infrastructure. Unavailability of these systems can directly lead to service disruption to customers and can be very costly in enterprise applications such as ebanking, online reservation systems, and mobile services. Modeling availability of disk subsystem is a major step in design of data storage systems. Previous modeling techniques have mainly focused on data unavailability or data loss due to double or multiple disk failures. In this thesis, we present both simulation and analytical modeling techniques to investigate the effect of serviceability on the overall availability of disk subsystems. The proposed...
A Reconfigurable Architecture Using Non-voltatile Memories
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
In recent years, emerging Non-Volatile Memories (NVMs) have become promising alternatives for existing memory technologies. Due to shortcomings of SRAM memory in nanometer era,NVMs such as Phase-Change Memory (PCM) can be used in configuration memories of Field-Programmable Gate Arrays (FPGAs). Despite prominent features of emerging NVMs, they suffer from high write-power, high write-latency, and limited number of reliable write opera-tions. In addition, a dedicated Peripheral Circuit (PC) which is required to convert the NVM state to the equivalent voltage level can impose significant area and power overheads to FPGAs.In this thesis, a reliable power-efficient hybrid architecture employing...
Evaluating Impact of Erasure Codes on Performance and Endurance of SSD-Based RAID Array
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
Performance and reliability are the major concerns in design of data storage systems. Using Redundant Array of Independent Disks (RAID) can enhance both performance and reliability. A commonly used configuration in RAID arrays is erasure codes to further enhance system reliability. Due to promising advantages of Solid-State Drives (SSDs)such as low power, shock resistance, and high I/O performance, designers have been encouraged to replace Hard Disk Drives (HDDs) by SSDs in RAID arrays. SSDs, however, suffer from limited endurance due to erase-before-write operation.In this thesis, we investigate the effect of stripe unite size and the number of disks of a RAID array on the endurance of SSDs...
Modeling and Analysis of the Factors Influencing the Crash-injury Severities in Iran
, M.Sc. Thesis Sharif University of Technology ; Samimi, Amir (Supervisor)
Abstract
Traffic safety is one of the fundamental part of the transportation planning which is led to lowest the number of crashes and its following consequences by in-depth studying. Thus, determining the severity of accidents, including damage, injury and fatal injury is very important. The aim of this study is analysis of the accident-injury severities in single-vehicle and multi-vehicle crashes and providing the policies in Iran. The approach used in this study to select the most effective parameters of the injury-severity is based on the data gathered in Iran Road Maintenance and Transportation Organization during the year 2011. Accident probabilistic model based on analysis of relations among...
Order Production Planning, and Meeting Due-Dates for MTO Reconfigurable Manufacturing Systems
, M.Sc. Thesis Sharif University of Technology ; Houshmand, Mahmoud (Supervisor)
Abstract
Time based competition is considered as an importance strategy in the contemporary manufacturing systems. Reconfigurable Manufacturing System (RMS) is a new paradigm that not only produces the products with high productivity but also allows for rapid response to market changes. Despite the large impact on company performance, the importance of due date setting and order planning processes and related decisions is underexposed in the literature of RMS. The most important contribution of this thesis is orders planning under setting due date in make-to-order RMS environment. This thesis seeks to determine the best selection of several orders, their sequencing and corresponding configurations...
An Efficient Routing Method to Reduce Aging Effect in Reconfigurable Devices
, M.Sc. Thesis Sharif University of Technology ; Asadi, Hossein (Supervisor)
Abstract
Signifcant downscaling of CMOS technology to provide high performance along with low power consumption has been accompanied by reliability degradations such as increased noise sensitivity and reliability concern due to aging phenomena (transient and permanent failuers). In this regard, with huge number of configuration bits, Field-Programmable Gate Arrays (FPGAs) are more susceptible to aging since aging not only degrades the performance, but also it may additionally result in corrupting the configuration cells and thus causing permanent circuit malfunctioning. While several works have investigated the aging effects in Look-Up Tables (LUTs), the routing fabric of these devices is seldom...