Sharif Digital Repository

In recent years, the security of integrated circuits (ICs) has received more attention as usage of ICs made by untrustworthy foundries has increased in safety-critical systems [1]. In this paper, we introduce a novel approach for fingerprinting the delay of functional paths in a sequential circuit that have millions of transistors, like processors. We present a method for inserting Ring Oscillators (ROs) into scan chain for measuring the delay of each functional path inside the chip. Using the proposed method, the payload part of Trojans will be detected according to their size and cell types. Our method can be used by power-based Trojan detection approaches for finding the trigger part of... 

Silver nanoparticles (NPs) stored in pore-arrays (pa) SU-8 photoresist layer were utilized as an antibacterial nanocomposition against E. coli bacteria. The pa-SU-8 matrix was fabricated by an optical interference lithography method resulting in small pores with a diameter of ∼50 nm and a depth of ∼100 nm. The Ag NPs were deposited on the soft polymeric matrix at different drying temperatures of 50 and 90 °C. X-ray photoelectron spectroscopy showed that the deposited silver NPs were substantially in the metallic state, independent from the drying condition. However, the concentration of the immobilized Ag NPs on the film surface increased (by a factor of 2.5) at the higher drying... 

OMG's Model Driven Architecture (MDA) has deeply influenced modern-day software development, not only by providing promising means for automating the software process, but also through revitalizing the role of modeling in software development, the importance of which had been neglected during the recent euphoria over lightweight development methods. However, MDA's need to remain reasonably abstract means that it is more a software development approach rather than a standalone methodology, and therefore needs methodology support to be practically useful. Several MDA-based methodologies exist today, yet the need remains for the definition of an instantiable MDA-based development process. We... 

In this paper, we propose a new noise robust algorithm for object tracking in the crowded video scenes. The algorithm exploits the properties of undecimated wavelet packet transform (UWPT) coefficients and texture analysis to track arbitrary objects. The coefficients of the UWPT of a user-specified region at the reference frame construct a Feature Vector (FV) for every pixel in that region. Optimal search for the best match of the region in successive frames is then performed by using the generated FVs inside an adaptive search window. Adaptation of the search window is achieved by inter-frame texture analysis to find the direction and speed of the object motion. Noise robustness has been... 

We propose a new algorithm for object tracking in crowded video scenes by exploiting the properties of undecimated wavelet packet transform (UWPT) and interframe texture analysis. The algorithm is initialized by the user through specifying a region around the object of interest at the reference frame. Then, coefficients of the UWPT of the region are used to construct a feature vector (FV) for every pixel in that region. Optimal search for the best match is then performed by using the generated FVs inside an adaptive search window. Adaptation of the search window is achieved by interframe texture analysis to find the direction and speed of the object motion. This temporal texture analysis... 

In this paper, we propose a new algorithm for occlusion handling for object tracking in the crowded video scenes. The algorithm exploits the properties of undecimated wavelet packet transform (UWPT) coefficients and texture analysis to track arbitrary objects. The algorithm is initialized by the user through specifying a region around the object of interest at the reference frame. Then, coefficients of the UWPT of the region construct a Feature Vector (FV) for every pixel in that region. Optimal search for the best match is then performed by using the generated FVs inside an adaptive search window. Adaptation of the search window is achieved by interframe texture analysis to find the... 

This paper presents a shape prediction algorithm in a noisy video sequence based on pixel representation in the undecimated wavelet domain. In our algorithm for tracking of user-defined shapes in a noisy sequence of images, the amplitude of coefficients in the best basis tree expansion of the undecimated wavelet packet transform are used as feature vectors (FVs). FVs robustness against noise has been achieved through inherent denoising and edge component separation in the best basis selection algorithm. The algorithm uses these FVs to track the pixels of small square blocks located at the vicinity of the object boundary. Searching for the best-matched block has been performed using... 

The present study aims at the investigation of free vibration analysis of thin cylindrical shells surrounded by an elastic medium, which is distributed over a particular length of the shell. The Love’s shell theory is utilized along with the Winkler foundation to obtain the governing equations of motion. An exact series expansion method of solution is employed for any arbitrary boundary conditions. The excellent accuracy of the obtained results is validated by comparing to the available literature. Moreover, several case studies are performed to provide an insight into the influence of some practically important parameters on free vibrations of circular cylindrical shells, including... 

In this work, the effect of strain rate on the ductility, intermediate temperature brittleness and fracture surface of Zr-based BMG over a wide range of temperatures from 0.1 Tg to near Tg, has been systematically investigated. The results showed two remarkable ductile to brittle transition at low cryogenic and intermediate temperatures. At low temperatures, below 0.4 Tg, the activation of diffusion mediated phenomena is negligible and the combined effects of strain rate and temperature contribute to the plasticity of material by changing the STZ volume, hence the possibility of forming multiple shear bands. At the temperature range from 0.4 Tg to the temperature at which the intermediate... 

According to previous studies on the fracture surface morphologies of bulk metallic glasses, the stable crack growth region width and vein pattern size increase with the plasticity at room temperature. In the present work, the fracture surface morphologies of Ti- and Zr-based bulk metallic glasses bent over a wide temperature range (0.1–0.8 glass transition temperature) are systematically analyzed. According to our finding, the stable crack growth region width increases while the vein pattern size decreases as the ductility improves by varying temperature. This observation is in contrast to the common thought that the ductility is proportional to the stable crack growth region width and vein... 

In this research, the dynamic behavior of serrated flows observed in the flexural stress-deflection curves during three-point bending (3 PB) tests on Zr-, Ti- and La-based bulk metallic glasses (BMGs) is statistically analyzed. Furthermore, the effect of strain rate on the serrations is studied. Based on the ductility of alloy, two distinct types of dynamics are detected. For more ductile alloys (Zr- and Ti-based BMGs) the stress drop magnitude of serrations obeys a power-law distribution of shear avalanches, which is an indicator of the self-organized critical (SOC) state in dynamics. In this case, the size of avalanches has no characteristic scale. In contrast, the size of serrations... 

In this study, the influence of temperature on serrated flow behavior, strain rate sensitivity (SRS) and effective activation volume in a Ti-based bulk metallic glass (BMG) bent at different strain rates has been investigated. Results reveal that the fundamental origin of shear deformation is related to the time-dependent structural relaxations, which occur during deformation at special temperatures and strain rates. Furthermore, the localized structural relaxation processes at intermediate temperatures cause an inelastic shuffling within cages and mitigate the activation of STZs. The main reason of negative SRS at intermediate temperatures is due to the insufficient time for structural... 

The effect of strain rate on the ductility of a La-based bulk metallic glass (BMG) over a wide temperature range, and the correlation between ductility and relaxation processes within this alloy are investigated in the present work. The three point bending test and dynamic mechanical analysis are employed to study these phenomena. It is found that the activation energies of the nearly constant loss (NCL) relaxation and intermediate temperature brittleness are almost identical. This observation reveals that the NCL relaxation, as a locally confined or caged dynamics, contributes as the main source of intermediate temperature brittleness in La-based BMGs. © 2018 Elsevier B.V  

In this study, the influence of temperature on serrated flow behavior, strain rate sensitivity (SRS) and effective activation volume in a Ti-based bulk metallic glass (BMG) bent at different strain rates has been investigated. Results reveal that the fundamental origin of shear deformation is related to the time-dependent structural relaxations, which occur during deformation at special temperatures and strain rates. Furthermore, the localized structural relaxation processes at intermediate temperatures cause an inelastic shuffling within cages and mitigate the activation of STZs. The main reason of negative SRS at intermediate temperatures is due to the insufficient time for structural... 

In this paper, the whirling frequencies of simply supported and clamped rotating cylindrical shells surrounded by an elastic foundation are investigated. The Love's shell theory is used along with the Winkler foundation to obtain the governing equations of motion. An exact power series solution is obtained for arbitrary boundary conditions and the results are verified with the literature. Several case studies are performed, and the effect of spinning speed, foundation stiffness, and geometrical dimensions of the cylinder on the whirling frequencies are investigated  

In the present study, free vibrations and stability of rotating single walled carbon nanotubes (SWCNT) is investigated by nonlocal theory of elasticity; while the CNT is partially resting on an elastic foundation. The governing equations of motion are presented by using Love's shell assumptions. An exact series expansion method of solution is employed and very accurate results are obtained. Some parameter studies including the effects of rotating speed, foundation stiffness, slenderness ratio and nonlocal parameter on the natural frequency and stability margins of the current model are studied. The studies show that rotation rates and foundation elasticity can contribute significantly in the... 

This paper introduces a quantization noise robust algorithm for object's shape prediction in a video sequence. The algorithm is based on pixel representation in the undecimated wavelet domain for tracking of the user-defined shapes contaminated by the compression noise of video sequences. In the proposed algorithm, the amplitude of coefficients in the best basis tree expansion of the undecimated wavelet packet transform is used as feature vectors (FVs). FVs robustness against quantization noise has been achieved through inherent denoising and edge component separation in the best basis selection algorithm. The algorithm uses these FVs to track the pixels of small square blocks located at the... 

Model-Driven Development (MDD) has become a familiar software engineering term in recent years, thanks to the profound influence of the Model Driven Architecture (MDA). Yet MDD, like MDA itself, defines a general framework, and as such is a generic approach rather than a concrete development methodology. Methodology support for MDA has been rather slow in coming, yet even though several MDA-based methodologies have emerged, they have not been objectively analyzed yet. The need remains for a critical appraisal of these methodologies, mainly aimed at identifying their achievements, and the shortcomings that should be addressed. We provide a review of several prominent MDA-based methodologies,... 

In this paper, we propose an adaptive object tracking algorithm in crowded scenes. The amplitudes of of Undecimated Wavelet Packet Tree coefficients for some selected pixels at the object border are used to create a Feature Vector (FV) corresponding to that pixel. The algorithm uses these FVs to track the pixels of small square blocks located at the vicinity of the object boundary. The search window is adapted through the use of texture information of the scene by finding the direction and speed of the object motion. Experimental results show a good object tracking performance in crowds that include object translation, rotation, scaling and partial occlusion. Copyright - World Automation... 

Recently, numerous studies have focused on simulation and optimisation of combined cooling, heat, and power (CCHP) systems. This research, from a different perspective, aims to conduct a comprehensive review of the studies performed in the field of solar, geothermal or combined sources, and subsequently analysing the multi-objective evolutionary algorithms to identify the most efficient situation, which satisfy researchers' needs in order to attain a better performance in their ongoing or future research projects. It is worth noting that multi-objective optimisation in these cycles is based on optimising a thermodynamic term (exergy efficiency, thermal efficiency, etc.) and an economic term...