Loading...
Search for:
asgari--ehsan
0.104 seconds
Total 353 records
Correlations in a multisubband quasi-one-dimensional electron gas
, Article Physical Review B - Condensed Matter and Materials Physics ; Volume 62, Issue 23 , 2000 , Pages 16001-16017 ; 01631829 (ISSN) ; Nafari, N ; Asgari, R ; Asgari, R ; Sharif University of Technology
2000
Abstract
This paper is an extension of an earlier work on electron correlations in semiconducting GaAs-based quasi-one-dimensional quantum wires. The extension was twofold. First, we developed the Singwi, Tosi, Land, and Sölander (STLS) scheme for multisubband structures. Secondly, we developed the multisubband ladder approximation diagrammatic technique. By using the results obtained for the spin symmetric and spin antisymmetric interpolarization and intrapolarization potentials, we calculate the corresponding electron-electron effective potentials. Our results for a two-subband model show that these effective potentials have an attractive part implying the occurrence of s-wave and p-wave pairings,...
Age-hardening behavior and phase identification in solution-treated AEREX 350 superalloy
, Article Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science ; Volume 37, Issue 7 , 2006 , Pages 2051-2057 ; 10735623 (ISSN) ; Sharif University of Technology
2006
Abstract
This article presents results of an investigation on age-hardening behavior of superalloy AEREX 350. Microhardness testing was employed to evaluate the age-hardening response of the alloy while optical, scanning, and transmission electron microscopy techniques were used to characterize the major phases formed during the aging process. No significant hardening was found in solution-treated samples aged at temperatures up to about 680 °C. Aging at 700 °C up to 950 °C, however, caused a characteristic hardening response. This hardening was concurrent with the formation of γ', an ordered phase with L12 structure, as fine precipitate distributed throughout the fcc matrix. In the temperature range...
Anomalous plastic behavior of fine-grained MP35N alloy during room temperature tensile testing
, Article Journal of Materials Processing Technology ; Volume 155-156, Issue 1-3 , 2004 , Pages 1905-1911 ; 09240136 (ISSN) ; Sharif University of Technology
2004
Abstract
In this paper, results of an investigation on the strain hardening responses of superalloy MP35N with two average grain sizes of 38 and 1 μm, during room temperature tensile testing are reported. The microstructural evolution of the deformed samples was studied using optical and transmission electron microscopy (TEM) techniques. The strain hardening behavior of the 38 μm material was rather similar to that previously reported for low stacking fault energy (SFE) fee alloys. The plastic behavior of the fine grain material, however, was unexpected. In the strain range of 0.1-0.4, the work hardening rate of the fine grain size sample was evidently lower than that of the large grain size...
Interaction of 3D dewetting nanodroplets on homogeneous and chemically heterogeneous substrates
, Article Journal of Physics Condensed Matter ; Vol. 26, Issue. 22 , 2014 ; ISSN: 09538984 ; Moosavi, A ; Sharif University of Technology
2014
Abstract
Long-time interaction of dewetting nanodroplets is investigated using a long-wave approximation method. Although three-dimensional (3D) droplets evolution dynamics exhibits qualitative behavior analogous to two-dimensional (2D) dynamics, there is an extensive quantitative difference between them. 3D dynamics is substantially faster than 2D dynamics. This can be related to the larger curvature and, as a consequence, the larger Laplace pressure difference between the droplets in 3D systems. The influence of various chemical heterogeneities on the behavior of droplets has also been studied. In the case of gradient surfaces, it is shown how the gradient direction could change the dynamics. For a...
Late-stage evolution of thin liquid coating films over step topographies
, Article Advanced Materials Research ; Volume 569 , 2012 , Pages 560-563 ; 10226680 (ISSN) ; 9783037854808 (ISBN) ; Moosavi, A ; Sharif University of Technology
2012
Abstract
Mesoscopic hydrodynamic equations are solved to investigate late-stage evolution of thin liquid films over step topographies. Different geometrical parameters including step height and initial position and configuration of resultant masses of dewetting (droplets) are probed to find their effects on the mass evolution of the system. Our results indicate that increasing the step height and locating the droplets close to the step enhance the dynamics and accelerate smaller droplet collapse
Reduced master equation for modeling of ferromagnetic single-electron transistor
, Article Applied Mechanics and Materials, 29 July 2011 through 31 July 2011, Bangkok ; Volume 110-116 , July , 2012 , Pages 3103-3110 ; 16609336 (ISSN) ; 9783037852620 (ISBN) ; Faez, R ; Sharif University of Technology
2012
Abstract
In this paper, the reduced master equation which is a fast simulation method of spin dependent transport in ferromagnetic single electron transistors is presented, for first time. This simulation method follows steady state master equation in which all charge states of the system are considered, whereas charge states are decreased in reduced master equation. This method is based on two degrees of electron freedom which are charge and spin. This is applied in the condition that orthodox tunneling theory is applicable to calculate the tunneling rate of electrons through barriers. The comparison between the I-V characteristics of a ferromagnetic single-electron transistor by following the...
Coarsening dynamics of nanodroplets on topographically structured substrates
, Article Journal of Physics Condensed Matter ; Volume 25, Issue 4 , 2013 ; 09538984 (ISSN) ; Moosavi, A ; Sharif University of Technology
2013
Abstract
Employing a biharmonic boundary integral method with linear elements, coarsening dynamics of nanodroplets on topographical step heterogeneity is investigated. It is shown that the step height and droplet configuration have an influential effect on the dynamics. Increasing the step height slows down the process while locating the droplets close to the step boosts the coarsening rate. Considering a slip boundary condition enhances the dynamics and reveals a transition in the droplet migration direction. Our results reveal that increasing the surface wettability weakens the dynamics. Various types of the disjoining pressure over the step are also considered and their effects on the coarsening...
Characterization of LiCoO2 nanopowders produced by sol-gel processing
, Article Journal of Nanomaterials ; Volume 2010 , 2010 ; 16874110 (ISSN) ; Soltanmohammad, S ; Sharif University of Technology
2010
Abstract
LiCoO2 nanopowders, one of the most important cathode materials for lithium-ion batteries, were synthesized via a modified sol-gel process assisted with triethanolamine (TEA) as a complexing agent. The influence of three different chelating agents including acrylic acid, citric acid, and oxalic acid on the size and morphology of particles was investigated. Structure and morphology of the synthesized powders were characterized by thermogravimetric/ differential thermal analyses (TG/DTA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). Results indicate that the powder processed with TEA and calcinated at 800 °C had an excellent hexagonal ordering of α-NaFeO2 -type (space...
Approximate method of determining the optimum cross section of microhannel heat sink
, Article Journal of Mechanical Science and Technology ; Volume 23, Issue 12 , 2010 , Pages 3448-3458 ; 1738494X (ISSN) ; Saidi, M.H ; Sharif University of Technology
2010
Abstract
Microchannels are at the forefront of today's cooling technologies. They are widely being considered for cooling of electronic devices and in micro heat exchanger systems due to their ease of manufacture. One issue which arises in the use of microchannels is related to the small length scale of the channel or channel cross-section. In this work, the maximum heat transfer and the optimum geometry for a given pressure loss have been calculated for forced convective heat transfer in microchannels of various cross-section having finite volume for laminar flow conditions. Solutions are presented for 10 different channel cross sections: parallel plate channel, circular duct, rectangular channel,...
Comment on ‘Free vibration and buckling analyses of cylindrical sandwich panel with magneto rheological fluid layer’ (Journal of Sandwich Structures and Materials, doi: 10.1177/1099636215603034)
, Article Journal of Sandwich Structures and Materials ; Volume 21, Issue 7 , 2019 , Pages 2411-2412 ; 10996362 (ISSN) ; Haddadpour, H ; Sharif University of Technology
SAGE Publications Ltd
2019
Tunable circular conversion dichroism and asymmetric transmission of terahertz graphene metasurface composed of split rings
, Article Optics Communications ; Volume 456 , 2020 ; Rahmanzadeh, M ; Sharif University of Technology
Elsevier B.V
2020
Abstract
The asymmetric transmission (AT) has attracted wide attention due to its novel applications. In this paper, we propose and investigate a tunable polarization-dependent intrinsically chiral graphene metasurface composed of split ring arrays in terahertz (THz) region. The resonance frequency of the structure is sensitive to the graphene chemical potential. Circular conversion dichroism (CCD) of the proposed structure is tunable and is reached to 0.36. Our work paths a new approach to propose some other compact and on-chip polarization-dependent structures in THz region. Furthermore, our proposed structure could be a useful segment in polarization-dependent systems. © 2019 Elsevier B.V
The Effects of Stress-Assisted Heat Treatment on the Microstructure and Phase Transformation Behavior of Ni-Rich Ni-Ti Shape Memory Alloy
, M.Sc. Thesis Sharif University of Technology ; Asgari, Sirous (Supervisor)
Abstract
Ni-Ti shape memory alloys have attracted most of the research in the field of shape memory alloys both because of their complicated and diverse phase transformation characteristics and their optimum properties for various applications which span such a properties as shape memory effect, pseudoelasticity, excellent mechanical properties and biocompatibility. The key properties of these alloys is generated through a thermoelastic martensitic transformation the occurrence of which is extremely sensitive to the metallurgical conditions of the alloy e.g. composition and microstructure. This has led to the development of various procedures implemented in either fabrication, processing or heat...
Genco's Bidding Strategy in Day-Ahead Energy Market Considering Demand Response
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Since 1980s the electricity market has been gradually evolving from a monopoly market into a liberalized one for encouraging competition and improving efficiency. This brings the opportunity for generation companies (Gencos) to make more profits while embracing more risks of not being dispatched. Therefore, it has become a core interest for the Gencos to develop optimal bidding strategies to maximize the profits and minimize the risks while participating in such a competitive market. Error of determining day-ahead electricity price is one of the sources of the risk. Energy price has a high impact on bidding strategy optimization process. So it should be determined with low error which is not...
Lithium Iron Silicate Sol-Gel Synthesis and Electrochemical Investigation
, M.Sc. Thesis Sharif University of Technology ; Asgari, Sirous (Supervisor)
Abstract
Recently lithium iron silicate (Li2FeSiO4) has been used as a new cathode material for lithium ion battery. Li2FeSiO4 has such benefits like low raw material price so lower production cost, lower environmental pollution, higher safety, electro chemical and cyclic stability and high theoretical capacity of 166 mAh/g against other cathode materials like LiMn2O4, LiBNiO2, LiCoO2 and LiFePO4. In this research Li2FeSiO4 was synthesized through sol gel synthesis method and effect of chelating agent concentration, calcination temperature and time has been investigated. To determine the appropriate calcination temperature range, TG/DTA was performed. Then the dried gel powder was calcined at each...
The Study of Microstructure and Phase Transformations in MP210 Superalloy
, M.Sc. Thesis Sharif University of Technology ; Asgari, Sirous (Supervisor)
Abstract
MP210 alloy is a member of multiphase family alloys, a class of wrought nickel-cobalt base alloys extensively used in high-quality applications including aerospace fasteners, gas turbine engines and petrochemical industry. Very limited information can be found in the literature about the microstructure and phase transformations of this alloy. The aim of this work is characterizing the aging response of the material and identifying the major strengthening phases precipitated in different range of temperatures and also studying the static recrystallization behavior of this alloy. The effect of age-hardening heat-treatment on the microstructure of MP210 superalloy was investigated using...
Multi Objective Distributed Generation Planning in a Flexible Environment
, Ph.D. Dissertation Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
The process of deregulation that has involved electricity many markets has introduced several new interesting research topics in power system area. This thesis addresses one of the most fascinating issues among them: the study of distributed generation both renewable and conventional integration in distribution networks. From the distribution network operator (DNO)'s point of view, it is of interest to develop a comprehensive methodology which considers various distributed generation technologies as an option for supplying the demand in distribution networks. In this thesis, the planning problem has been multi-objectively modeled. This will help the planner in decision making while knowing...
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Losses are unavoidable in any parts of power systems, from generation to receiving nodes and occur in transmission and distribution networks. However, the main loss component is produced in distribution networks. Energy losses in distribution networks are about 70% of technological transport energy losses.
Energy losses in distribution networks are an important indicator for the planning and operation of the system. A fast, reliable and accurate energy loss calculation method is required for optimal operation of the distribution networks.
Energy loss depends on network's operating conditions. Loads values and loads factors are time variables; therefore, methods based on probability...
Energy losses in distribution networks are an important indicator for the planning and operation of the system. A fast, reliable and accurate energy loss calculation method is required for optimal operation of the distribution networks.
Energy loss depends on network's operating conditions. Loads values and loads factors are time variables; therefore, methods based on probability...
Methods of Clearing Reactive Power Market and Cost Allocation in Pool Structure
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Restructuring and privatization in power system such as any industry leads to better market operation and more social welfare. Since two decade the power system in many countries have changed from monopoly to free market. In a restructured network the technical and economical aspects should be considered together. Ancillary services are needed for any power system to be operated in an optimal and secure manner. Reactive power and voltage regulation is one of the most important ancillary services in the network. this service should be supplied by its providers through a competitive market and system operator determines the optimal dispatch among different bids. The cost of purchasing reactive...
Colloidal Synthesis of CdSe Nanoparticles and the Influence of Processing Parameters on Growth kinetics
, M.Sc. Thesis Sharif University of Technology ; Asgari, Sirous (Supervisor)
Abstract
Over the past two decades, several studies have been investigated on synthesis and properties of semi-conductor quantum dots because of their applications in sensors, LEDs, detectors, solar cells, etc. One of challenging issues in synthesizing these nano-particles is their size distribution. In this study, Cadmium Selenide was synthesized by the method of colloidal synthesis. X-ray diffraction showed that the crystalline nano-particles have wurtzite structure. For obtaining a uniform size distribution, effect of various parameters such as molar ratio of components and reaction temperature on the growth kinetics of these particles, were studied. Results showed that molar ratio of Selenium to...
On-line SPE of Clodinafop Propargyl Traces from Aquatic Media Using Electrospun Polyamide Nanofibers Disks
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Habib (Supervisor)
Abstract
An on-line solid phase extraction (SPE) method coupled with high performance liquid chromatography (HPLC) was developed using electrospun polyamide (PA) nanofibers as the extractin medium for trace determination of clodinafop propargyl herbicide in environmental aqueous samples. The sufficient numbers of disc sheets were cut from the electrospun PA mat and used as packing material in a cartridge. The homogeneity and the porosity of the prepared PA sheet were studied using the scanning electron microscopy (SEM) and the observed nanofiber diameters and lengths proved that the prepared sorbent possess a high aspect ratio. Major parameters affecting the extraction efficiency were optimized. The...