Sharif Digital Repository

The asymmetric transmission (AT) has attracted wide attention due to its novel applications. In this paper, we propose and investigate a tunable polarization-dependent intrinsically chiral graphene metasurface composed of split ring arrays in terahertz (THz) region. The resonance frequency of the structure is sensitive to the graphene chemical potential. Circular conversion dichroism (CCD) of the proposed structure is tunable and is reached to 0.36. Our work paths a new approach to propose some other compact and on-chip polarization-dependent structures in THz region. Furthermore, our proposed structure could be a useful segment in polarization-dependent systems. © 2019 Elsevier B.V  

Supersonic aeroelastic instability of a three-layered sandwich beam of rectangular cross section with an adaptive magneto-rheological fluid (MRF) core layer is investigated. The panel is excited by an airflow along it's longitudinal direction. The problem formulation is based on classical beam theory for the face layers, magnetic field dependent complex modulus approach for viscoelastic material model and the linear first-order piston theory for aerodynamic pressure. The classical Hamilton's principle and the assumed mode method are used to set up the equations of motion. The validity of the derived formulation is confirmed through comparison with the available results in the literature. The... 

Heat generation from Very Large-Scale Integrated (VLSI) circuits increases with the development of high-density integrated circuit technology. One of the efficient techniques is liquid cooling by using a microchannel heat sink. Numerical simulations on the microchannel heat sink in the literature are mainly two dimensional. The purpose of the present study is to develop a three-dimensional procedure to investigate flow and conjugate heat transfer in the microchannel heat sink for electronic packaging applications. A finite volume numerical code with a multigrid technique, based on an additive correction multigrid (AC-MG) scheme, which is a high-performance solver, is developed to solve the... 

Simple formulas for calculating equivalent von Mises stress and von Mises effective plastic strain in an elastic–plastic ordinary peridynamic analysis are proposed. The equivalent von Mises stress is calculated by equating the deviatoric part of strain energy obtained from classical continuum mechanics and peridynamics. The effective plastic strain is proposed so that it reduced to uniaxial plastic strain in uniaxial tension test. Two example problems of the plate with a hole and a central crack under tension are considered to verify the validity of the proposed formulas. The plots of von Mises stress, equivalent plastic strain, plastic zone area and horizontal and vertical displacements are... 

Heat generation from very large-scale integrated (VLSI) circuits increases with the advent of high-density integrated circuit technology. One of the promising techniques is liquid cooling by using microchannel heat sink. Numerical works on the microchannel heat sink in the literature are mostly two dimensional. The purpose of the present study is to develop a three-dimensional analysis procedure to investigate flow and conjugate heat transfer in the microchannel-based heat sink for electronic packaging applications. The micro-heat sink model consists of a 10 mm long silicon substrate, with rectangular microchannels, 57 μm wide and 180 μm deep, fabricated along the entire length. A finite... 

Microchannels are at the fore front of today's cooling technologies. They are widely being considered for cooling of electronic devices and in micro heat exchanger systems due to their ease of manufacture. One issue which arises in the use of microchannels is related to the small length scale of the channel or channel cross-section. In this work, the maximum heat transfer and the optimum geometry for a given pressure loss have been calculated for forced convective heat transfer in microchannels of various cross-section having finite volume for laminar flow conditions. Solutions are presented for 10 different channel cross sections, namely parallel plate channel, circular duct, rectangular... 

One of the engineers concern in designing bridges and structures under moving load is the uniformity of stress distribution. In this paper the analysis of a variable cross-section beam subjected to a moving concentrated force and mass is investigated. Finite element method with cubic Hermitian interpolation functions is used to model the structure based on Euler-Bernoulli beam and Wilson-⊖ direct integration method is implemented to solve time dependent equations. Effects of cross-section area variation, boundary conditions, and moving mass inertia on the deflection, natural frequencies and longitudinal stresses of beam are investigated. Results indicates using a beam of parabolically... 

An experimental study was carried out on an axisymmetric supersonic inlet with external compression. The scope of this study was to investigate the general characteristics of the inlet buzz under various design and off-design conditions. The model was equipped with accurate and high frequency pressure sensors and the tests were conducted at Mach numbers varying from 1.8 to 2.5, at various angles of attack, and at different mass flow rates. Shadowgraph flow visualization, together with a high speed camera, was used to capture the external shock structure in front of the inlet. Frequencies of buzz were obtained from both the shadowgraph pictures and analysis of the pressure data. The amplitude... 

Nowadays information technology has been applied in various fields. Enterprise Resource Planning (ERP) is one of the most important applications of IT in Iranian organizations. These systems can create competitive advantages for organizations. Companies which intend to use ERP systems have difficulties in selecting optimum system because of the diversity of such systems. On the other hand according to the considerable changes that the implementation of such systems at all levels of the organization willbring about, lack precision in selecting appropriate ERP systems leads to irreparable damage for the organization. This study attempts to resolve problems in selecting and implementing... 

Different compositions of TiO2–BaTiO3 nanocomposites are synthesized with various weight ratios for dye-sensitized solar cell (DSSC) applications. TiO2 and BaTiO3 nanoparticles (NPs) are synthesized by sol-gel and solvothermal methods, respectively and are employed as the photoanode electrodes. BaTiO3 NPs have pure cubic perovskite crystal structure with an average size of 20-40 nm, while TiO2 NPs show pure anatase phase with 15-30 nm size. The power conversion efficiency (PCE) enhancement of the cells is first attained by controlling the thickness of the films for light harvesting improvement. The fabricated DSSC composed of pure BaTiO3 NPs with an optimal thickness of 25 μm shows... 

The interactions between four different gas molecules (methanol, o-xylene, p-xylene and m-xylene) and Ni-decorated monolayer MoS2 were investigated by means of density functional computations to exploit its potential application as a gas sensor. The electronic properties of the Ni-decorated monolayer MoS2 and gas molecule (adsorbent–adsorbate properties) strongly depend on the Ni-decorated monolayer MoS2 structure and the molecular configuration of the adsorbate. The adsorption properties of volatile organic compound (VOC) molecules on Ni-decorated MoS2 has been studied taking into account the parameters such as adsorption energy, energy bandgap, density of states, and Mulliken charge... 

Two different approaches of the dynamic optimization for chemical process control engineering applications are presented. The first approach is based on discretizing both the control region and the time interval. This method, known as the Region Reduction Strategy (RRS), employs the previous solution in its next iteration to obtain more accurate results. Moreover, the procedure will continue unless the control region becomes smaller than a prescribed value. The second approach is called Control Vector Parameterization (CVP) and appears to have a large number of advantages. In this approach, control action is generated in feedback form, i.e., a set of trial functions of the state variables... 

This paper is an extension of an earlier work on electron correlations in semiconducting GaAs-based quasi-one-dimensional quantum wires. The extension was twofold. First, we developed the Singwi, Tosi, Land, and Sölander (STLS) scheme for multisubband structures. Secondly, we developed the multisubband ladder approximation diagrammatic technique. By using the results obtained for the spin symmetric and spin antisymmetric interpolarization and intrapolarization potentials, we calculate the corresponding electron-electron effective potentials. Our results for a two-subband model show that these effective potentials have an attractive part implying the occurrence of s-wave and p-wave pairings,... 

The stability of a viscoelastic plate strip, subjected to an axial load with the Kelvin–Voigt fractional order constitutive relationship is studied. Based on the classical plate theory, the structural formulation of the plate is obtained by using the Newton’s second law and the aerodynamic force due to the fluid flow is evaluated by piston theory. The Galerkin method is employed to discretize the equation of motion into a set of ordinary differential equations. To determine the stability margin of plate the obtained set of ordinary differential equations are solved using the Laplace transform method. The effects of variation of the governing parameters such as axial force, retardation time,... 

Horizontal ground heat exchangers (GHEs) have a lower initial installation cost in comparison to vertical ones; however, they require more land area. In order to reduce the required land area of horizontal GHEs, their heat exchange rate per unit land area needs to be enhanced. A remedy to this problem is installing horizontal GHEs in an arrangement with maximum heat exchange rate per unit land area. However, such arrangements have not been introduced for different types of horizontal GHEs thus far. To this end, in this study, the thermal performance of various GHE pipe arrangements for three different types (linear, spiral, and slinky) of horizontal GHEs is evaluated. Comparing the obtained... 

Background: Poor balance performance and impaired postural control have been frequently reported in patients with low back pain.However, postural control is rarely monitored during the course of treatment even though poor postural control may contribute tochronicity and recurrence of symptoms. Therefore, the present study aimed at investigating the effect of a nonextensible lumbosacralorthosis (LSO) versus routine physical therapy on postural stability of patients with nonspecific chronic low back pain.Methods: This was a randomized controlled trial conducted between November 2015 and May 2016 at the outpatient physical therapyclinic of the School of Rehabilitation Sciences. Patients with... 

Background: A few clinical trials have examined the effect of treatment interventions on postural control in patients with chronic low back pain, all of which have exclusively evaluated postural stability using traditional linear measures of postural sway. However, postural control improvement cannot be determined by exclusively relying on linear measurements, because these parameters provide no information on underlying motor control mechanisms. Objective: This study aimed to compare the effect of using lumbosacral orthoses (LSO) together with routine physical therapy, compared to routine physical therapy alone on postural control, using nonlinear analysis techniques. Methods: Forty-four... 

Background: Lumbosacral orthosis (LSO) is commonly used for the treatment of back pain. The clinical and mechanical effectiveness of this device has been repeatedly investigated in several studies; however, its sensorimotor effectiveness has been rarely considered. Regarding this, the aim of the current study was to investigate the effect of a non-extensible LSO on postural stability (as a construct of sensorimotor function) in patients with nonspecific chronic low back pain (LBP). Methods: This preliminary study was conducted on 17 patients with nonspecific chronic LBP using a single-group quasi-experimental design. Postural stability was measured while the participants were placed in a... 

The characteristics of postural sway were assessed in quiet standing under three different postural task conditions in 14 patients with nonspecific chronic low back pain and 12 healthy subjects using linear and nonlinear center of pressure parameters. The linear parameters consisted of area, the mean total velocity, sway amplitude, the SD of velocity, and the phase plane portrait. The nonlinear parameters included the Lyapunov exponent, sample entropy, and the correlation dimension. The results showed that the amount of postural sway was higher in the patients with low back pain compared with the healthy subjects. Assessing the nonlinear parameters of the center of pressure showed a lower... 

Different structures of dye-sensitized solar cells (DSCs) were fabricated with various compositions and arrangement modes of the photoanodes. The solvothermally grown TiO2 nanoparticles and sol-gel derived spherical TiO2 and BaTiO3 particles were employed as the active and scattering layers of DSCs. TiO2 nanoparticles and spherical particles had pure anatase structure with particle size of 15-30 nm and 200-400 nm, respectively, whereas 300-800 nm BaTiO3 particles showed cubic perovskite structure. The efficiency improvement of mono-layer cells made of TiO2 nanoparticles (i.e., 7.22%) was achieved by light harvesting mechanism. Further enhancement of photovoltaic performance was achieved by...