Sharif Digital Repository

In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of... 

The purpose of this research is to establish a neutron reference field for the calibration of neutron dosimeters based on the beam of the neutron radiography system in the Isfahan miniature neutron source reactor (MNSR). The aim is to address the several limitations, including the inability to achieve a wide range of dosimetry, high uncertainty due to variations in distance from the source, significant scattering, and non-uniformity. To overcome these issues, a linear, stable, and wide-range dosimetry field based on MNSR have been established, characterized and evaluated by using the variations of the reactor power. In the first step of establishing the calibration field, the linear and... 

Tungsten Inert Gas (TIG) process and different cored wires that were filled separately with nano TiC particles, micro TiC particles and graphite powders were employed to produce surface composite coating on CP-Ti substrate to improve wear resistance. At first using titanium strips, wire drawing process and different powders various cored wires were produced and then using TIG, these cored wires were coated on CP-Ti. This process was done for different current intensities and velocities. Composite coating tracks were found to be affected by the TIG heat input and the kinds of the cored wires. The microstructures of the surface composite coating showed phases of α'-Ti and primary and dendritic... 

This work describes a new approach to the so called “Engineering Requirements Process” based on abilities to develop a meaningful task. We first describe how a meaningful is created from scratch and then we explain how requirements could be added to a level where the predefined task is no-longer doable. The process is then applied to design of an aircraft wing to show how requirements could be avoided during a design process. The method is expected to be applicable to all aircraft sub-systems and parts. The process is particularly useful where all design requirements are not available at once, rather they increase as time goes on and new stakeholders become apparent. In this work, we have... 

In this study, orthosilicate materials with chemical formula of Li2MSiO4 (M one or two transition metal/metals) were investigated experimentally and theoretically as cathode material of Li-ion batteries. The most important material in this category i.e. Li2FeSiO4 was synthesized by three methods including nitrate-based sol-gel, oxalate-based solid state reaction and oxide-based solid state reaction. Based on XRD and SEM evaluations, grain size of synthesized powders was estimated to be between 15 to 100 nanometers. Of these three methods, oxide-based solid state reaction was employed in this study for the first time. This syntheses method is very important due to the significant lower... 

The MP210 superalloy belongs to the category of multi-phase superalloys, designed for specific applications at high temperatures, such as components in gas turbine engines. However, its usage is limited due to hot fracture concerns at temperatures around 800 degrees Celsius. This research delves into the mechanism of hot fracture in this alloy. To explore this, the microstructural changes in samples subjected to hot tensile testing in the temperature range of 500 to 1000 degrees Celsius were studied using microscopic and microanalytical techniques. The yield strength and ultimate tensile strength at 500 degrees Celsius were 475 and 850 megapascals, respectively, decreasing to 105 megapascals... 

Researchers have long considered the phenomenon of parametric amplification. This phenomenon is introduced first in nonlinear structures and then in limited systems of time-varying linear structures. Time-modulated systems have many capabilities, such as amplification, non-reciprocity, and other phenomena in wave propagation. So far, time-varying circuits have been studied in terms of stability and analytical solution. The purpose of this project is to investigate parametric amplification in time-varying linear systems. Studying a structure under a circuit model is essential to other analyses practically implemented in various frequency ranges from microwave to light. As a result, this... 

Hadith, as one of the most important sources of classical Arabic text, presents the sayings and the conduct of Prophet Muhammad (PBUH) and his family (A.S) as narratives of life and religious teachings. In this context, Hadith processing includes tasks such as sorting, extraction, linking, categorization, and alignment of information from hadith texts, which assist in easy access to information and better understanding of the meanings of the hadiths. The absence of a comprehensive database of hadiths presents a challenge, making access to information diffcult and comparison across different works impossible. Preprocessing of hadith texts faces challenges like information extraction (such as... 

All supersonic intakes with external compression, having a good level of performance at all the critical poin t. Exhibit a marked instability of flow in subcritical operation below some value of the flow ratio, in the form of an oscillation of the shock system, colloquially known as “buzz", which can lead to thrust loss, engine surge or even structural damages. Therefore the effort to understand the nature and cause of this phenomenon is important in order that the starting of buzz can be predicted and more effectively avoided without losing performance. This phenomenon has been the subject of many studies, mainly experimental. In this research, we design and build an axisymmetric supersonic... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Low back pain is one the most prevalent disease and major economic issue facing modern countries. Epidemiological studies suggest that maximum trunk flexion, the angular velocity of trunk and the rate of repetitive movements (such as flexion-extension), are associated with low-back disorders. From biomechanical point of view, lack of stability during dynamic repetitive movements, increases the risk of injuries. On the other hand, some researchers suggest increasing motor variability could be an intrinsic factor to intervene muscuskeletal disorders during repetitive movements. Pace of repetitive occupational tasks could affect both, motor variability and dynamic stability. The goal of this... 

Fatigue crack growth can have harmful effects on the reliability rotary machine. While an early warning to crack, can be used to extend the life of these expensive machines and increase reliability.Structural Vibration Condition Monitoring as a primary fault detection method, achieved to a lot amazing result and for this reason studies vibration behavior of cracked rotational shaft is a big issue for engineers of dynamic machine.In this research, first check the fault detection methods based on structural vibration condition monitoring, mode shape methods were extracted. Then by modeling rotational shaft in computer and creation of crack on it, fault detection quality of these methods have... 

It is important to provide an appropriate and economically method with technical and engineering considerations to stabilize excavated underground spaces. The necessity of this, especially for the construction of underground metro stations located in the cities which faces many problems, is more evident. In this research, it has been tried to introduce an optimal method according to the type of area for the construction of the underground station. In order to obtain stress and strain condition in structural elements and surface deformations due to different stages of excavating, numerical modeling in FLAC3D has been used. By examining the parameters that affect the sustainability of this... 

In this study, we aim to learn representations from microscopic cell images that effectively capture the features of drugs affecting the cells, allowing us to identify effective drugs for treating a disease. We employ two parallel learning paths using predictive and generative models. Specifically, we have achieved a predictive model on the RxRx19a dataset that, unlike previous models, is interpretable, optimized, and robust to dras- tic changes in drug properties. Additionally, we have developed the first generative model on this dataset, which not only generates high-quality images but also discovers a meaningful latent space. This latent space divides the representation into relevant... 

Co-movement between inflation and nominal interest in response to an interest rate shock, dubbed neo-fisherianism, has been the subject of contentious debate since the advent of non-inflationary ZLB environment. We design an economic model rich with banking features to understand the economic responses to permanent and long-term interest rate shocks. We find that responses to a permanent positive interest rate shock depend on the monetary authorities’ speculation of the new long-term inflation rate, with the most probable outcome being a permanent increase in inflation. Responses to a long-term positive interest rate shock depict an increase and then decrease in inflation. We also discover... 

Influence of excavating the Tehran metro line 7 tunnel on surface settlement, stresses and deformations induced in Towhid tunnel is investigated using numerical modeling. Construction of Metro tunnel as the new one must be carried out without imposing any damage to the Towhid tunnel as the existing tunnel. Towhid tunnel is a set of twin tunnels along the Chamran highway in Tehran. The tunnels were constructed using sequential excavation method and lined with cast in place reinforced concrete; on the other side metro line 7 is being constructed using 2 EPB tunnel boring machines and lined with reinforced concrete segments. This research consists of the study of the effects of pillar width,... 

Foam injection for enhanced oil recovery is concerned by petroleum engineers because it decreases adverse effects of fingering and gravity segregation caused by the injected fluid .Obviously foam stability is an important factor in the efficiency of this process. So investigating it is an imperative. One of the ways that less studied and can improve foam stability is using of nanoparticles. In this project effect of nanoparticles on foam stability and displacement mechanism during foam flooding has been discussed.
Study consisted of two sets of experiments. In the first part, the static foam stability in the presence of silica nanoparticles has been investigated. Also influence of...