Sharif Digital Repository

In this paper, we analyze the worst-case delay performance of a network of fair queuing servers in case of multiple-paths between source-destination pairs. In order to develop worst-case delay analysis for the multiple-path scenario, two challenging events should be addressed: merging different sub-streams of a session as well as distributing a traffic stream among different paths (traffic partitioning). Specifically, we propose to merge incoming sub-streams of a session to a node according to a limited rate Fair Queuing (FQ) scheme. Although the merged stream is treated as a unity, this approach results in a guaranteed level of service to each sub-stream. In addition, an algorithm is... 

The concept of a nonlinear transfer function of a fibre-optic communication link is reviewed. Also an approximation of the nonlinear transfer function is introduced, which allows to define an equivalent single-span model of a dispersion-managed multi-span system. In this paper we will show its limits of validity and try to extent these limits by enhancing the theoretical model. In this respect we will discuss the impact of dispersion precompensation and show the influence of residual dispersion per span, number of spans and local dispersion on transmission systems with on-off keying and differential phase-shift keying modulation formats. This approach allows fast assessment of the... 

The insect circulatory system contains an open hemocoel, in which the mechanism of hemolymph flow control is ambiguous. As a continuous fluidic structure, this cavity should exhibit pressure changes that propagate quickly. Narrow-waisted insects create sustained pressure differences across segments, but their constricted waist provides an evident mechanism for compartmentalization. Insects with no obvious constrictions between segments may be capable of functionally compartmentalizing the body, which could explain complex hemolymph flows. Here, we test the hypothesis of functional compartmentalization by measuring pressures in a beetle and recording abdominal movements. We found that the... 

In this article, we propose a lightweight security scheme for ensuring both information confidentiality and transmission resiliency in the Internet-of-Things (IoT) communication. A single-Antenna transmitter communicates with a half-duplex single-Antenna receiver in the presence of a sophisticated multiple-Antenna-Aided passive eavesdropper and a multiple-Antenna-Assisted hostile jammer (HJ). A low-complexity artificial noise (AN) injection scheme is proposed for drowning out the eavesdropper. Furthermore, for enhancing the resilience against HJ attacks, the legitimate nodes exploit their own local observations of the wireless channel as the source of randomness to agree on shared secret... 

This paper describes the results of an experimental and numerical study that focused on multi-directional behavior of unreinforced masonry walls and established the requisite of the related proposed design equations. The tests were conducted following several sets of multi-directional loading combinations imposed on the top plane of the wall along with considering monotonic and cyclic quasi-static loading protocols. Various boundary conditions, representing possible wall–roof connections, were also considered for different walls to investigate the influence of rotation of the top plane of the wall on the failure modes. The results of the tests were recorded with a host of high precision data... 

Magnetic field effects are encountered in many engineering applications which include but are not limited to metal casting, nuclear reactor coolers, and geothermal energy extraction. On the other hand, due to their outstanding thermal performance, nanofluids have been successful in obtaining acceptability as per the new generation of heat transfer fluids in automotive cooling devices, in heat exchangers, and building heating. Therefore, this research is carried out to understand how the nanofluid flow in a cavity is affected by a magnetic field (due to a dipole placed nearby). The single-phase model is employed for modeling the nanofluid, whereas the governing partial differential equations... 

In this research purely oscillation fluid flow in two microtubes 150 and 250 μM(3.5 mm length) is studied using computational fluid dynamic (CFD) approach and utilizing a new experimental setup developed for dynamic interfacial tension measurement (capillary pressure technique) in the frequency range between 0.2 and 80 Hz. The experiments are done with pure water at a mean temperature of about 25 °C. The results of oscillatory conditions for microtubes of 0.5 mm in diameter have been compared with experimental results for several frequencies. The computational approach was validated by comparison with experimental data of the continuous constant flow through microtubes and also with... 

In this paper, we analyze the performance of a nonlinear two-photon-absorption (TPA) receiver and compare its performance with that of a single-photon-absorption (SPA) receiver in the context of spectral-phase-encoded optical code-division multiple access (CDMA) technique. The performances for the above systems are evaluated for two different transmission scenarios, namely, asynchronous and slot-level synchronous transmitters. Performance evaluation includes different sources of degradation such as multiple-access interference, noise due to optical amplification, shot noise, and thermal noise. In obtaining the performance, the mean and variance of the received signal in each of the above... 

In this paper, the authors study the performance of a two-photon absorption (TPA) receiver in a typical communication system employing an optical amplifier. For the study, the authors develop a comprehensive performance analysis, taking into account noises due to an optical amplifier, shot noise, and thermal noise, using Gaussian approximation technique. In evaluating the performance of the system using this technique, the mean and the variance of the received signal will be derived. Comparing the results of receivers using the TPA process with that of a typical single-photon absorption (SPA) structure leads the authors to conclude that TPA receivers can be used when the speed of the... 

This paper describes a study of the performance of various configurations for placing multiple optical amplifiers in a typical coherent ultrashort light pulse code-division multiple access (CULP-CDMA) communication system using the additive noise model. For this study, a comprehensive performance analysis was developed that takes into account multiple-access noise, noise due to optical amplifiers, and thermal noise using the saddle-point approximation technique. Prior to obtaining the overall system performance, the input/output statistical models for different elements of the system such as encoders/decoders, star coupler, and optical amplifiers were obtained. Performance comparisons... 

Single drops or bubbles are frequently used for the characterization of liquid- fluid interfaces. Their advantage is the small volume and the various protocols of their formation. Thus, several important methods are based on single drops and bubbles, such as capillary pressure and profile analysis tensiometry. However, these methods are often applied under dynamic conditions, although their principles are defined under equilibrium conditions. Thus, specific attention has to be paid when these methods are used beyond certain limits. In many cases, computational fluid dynamics (CFD) simulations have allowed researchers, to extend these limits and to gain important information on the... 

Reduction of cold start hydrocarbon (HC) emissions requires a proper compromise between low engine-out HC emission and fast light-off of the three way catalytic converter (TWC). In this paper, a hybrid switching system is designed and optimized for reducing HC emissions of a mid-sized passenger car during the cold start phase of FTP-75 (Federal Test Procedure). This hybrid system has the benefit of increasing TWC temperature during the early stages of the driving cycle by switching between different operational modes. The switching times are optimized to reduce the cumulative tailpipe HC of an experimentally validated automotive emission model. The designed hybrid system is tested in... 

In this investigation, the stability analysis of a rotating elastic stepped shaft is studied and the sufficient condition for system stability in the sense of Lyapunov is derived. The model consists of an elastic stepped shaft which is clamped rigidly to a rotary device. From the model's point of view, the entire length of shaft is partitioned into uniform segments with different characteristics. The Lyapunov direct method is applied in this survey where the Hamilton function has been chosen as the candidate Lyapunov function. Since the dynamical mode shapes of the shaft are required for the stability analysis, the shaft has been modeled by the Euler- Bernoulli beam theory and the... 

Reduction of cold start hydrocarbon (HC) emission requires a proper compromise between low engine-out HC emission and fast light-off of the three way catalytic converter (TWC). In this paper a model based approach is used to design and optimize a hybrid switching system for reducing HC emission of a mid-sized passenger car during the cold start phase of FTP-75. This hybrid system takes the benefit of increasing TWC temperature during the early stages of the driving cycle by switching between different operational modes. The switching times are optimized to reduce the cumulative tailpipe HC emission of an experimentally validated automotive emission model. It is shown that the new hybrid... 

An improved phenomenological model is presented for numerical simulation of a Dielectric Barrier Discharge (DBD) plasma actuator for separation control of high angle of attack flow over a wind turbine airfoil. Based on existing numerical models and experimental measurements, a new model is proposed for prediction of the length of a plasma extent which is more consistent with previous observations. The electrical and hydrodynamic solvers used in the present study are validated against published experimental data. Then the applicability of a DBD actuator, mounted on a DU 91-W2-250 airfoil is extensively analyzed for a wide range of operating voltages and frequencies. The analysis is completely... 

The present work developed a mixed-mode cohesive zone model (CZM) with a mode I failure criterion to predict the delamination bending loads of multilayer, composite printed circuit boards (PCBs) assembled with soldered ball grid array (BGA) components that were reinforced with an underfill epoxy adhesive. Two different delamination modes were observed in these microelectronic assemblies: delamination at the interface between the solder mask and the first conducting layer of the PCB, and PCB subsurface delamination at the interface between the epoxy and glass fibers of one of the prepreg layers. The cohesive parameters for each of the two crack paths were obtained from fracture tests of... 

The present work developed a mixed-mode cohesive zone model (CZM) with a mode I failure criterion to predict the delamination bending loads of multilayer, composite printed circuit boards (PCBs) assembled with soldered ball grid array (BGA) components that were reinforced with an underfill epoxy adhesive. Two different delamination modes were observed in these microelectronic assemblies: delamination at the interface between the solder mask and the first conducting layer of the PCB, and PCB subsurface delamination at the interface between the epoxy and glass fibers of one of the prepreg layers. The cohesive parameters for each of the two crack paths were obtained from fracture tests of... 

In this paper, we analyze the sensitivity degradation of a system due to various orders of chromatic dispersion. To do this, the power penalty of the uncoded and encoded pulse of a coherent ultrashort light pulse Code Division Multiple Access (CDMA) communication system due to various orders of chromatic dispersions are analyzed. Analysis of uncoded pulse shows that the power penalty is unacceptably high when second order dispersion is not compensated. However we can obtain acceptable level of power penalties while compensating second and third order dispersion. Also, due to the high order of dispersion, the power of encoded pulse decreases as it propagates through the fiber which leads to a... 

The performance of a rotating biological contactor (RBC) for posttreatment of the slaughterhouse effluent from an upflow anaerobic sludge blanket (UASB) reactor was investigated in this study. The 280-L, six-stage RBC pilot plant was operated at different organic loading rates (OLRs) and biodisk speeds. The overall removal efficiencies for soluble biochemical oxygen demand (SBOD), total biochemical oxygen demand (TBOD), and total chemical oxygen demand (TCOD) decreased with increasing OLRs. Disk rotational speed did not have a significant effect on performance in the range studied. The results showed that satisfactory posttreatment to meet regulatory requirements for agricultural purposes...