Sharif Digital Repository

The phenomenon of vortex flow, is one of the most predominant streams in the nature. This phenomenon yielded by the motion of vortices, produces up to 1000 times acceleration of the Earth’s gravity. The issues of uncontrolled harvesting of oil wells and increase the life of the wells, which cause to increase in the extracted crude salt, reveal the importance of waste management and both handling and refining petroleum. According to global statistics, for every extracted barrel of oil, three barrels of water are yielded. Therefore, 250 million produced water barrels per day is produced.The separator technology with vortex core (brand Voraxial) is one of the latest technologies in waste-water... 

In the process of extraction and refining of crude oil, a considerable amount of waste water are produced and if they are not removed, they would become one of the most hazardous environmental factors. Furthermore, purification and separation of such wastewaters are extremely costly, which with an increase in separation efficiency can lead to a decrease in valuable product loss. On the other hand, in the extraction process from oil reservoirs, because of porous and permeable nature of them, solid particles may be added to the extracted crude oil, which can result in an obstruction in pipelines and transport equipment.The most conventional method for separating a mixture of water, oil, and... 

Enormous amounts of water and energy are lost by scrubber utilization for furnace exhaust gas washing during direct iron reduction process. Hence, the aim of the current research is design and construction of a system which could be employed instead of scrubber within direct iron reduction process considering the equipment size constraints.To this end, the substitute system was manufactured after dimensional analysis and simulation of lab model compared to the prototype regarding the implementation limitations. The model has been tested in different operating conditions and empirical relations have been extracted for general analysis of direct iron reduction process. The case study here is... 

Present study is to simulate laminar flow in a channel exposed to heat flux from the walls and filled with porous media by software ANSYS CFX in finite volume method. The analysis is based on the Naviere-Stokes equations in the flow field which are modified to Brinkman-Forchheimer equations to be applicable for porous media. Effect of Reynolds number and permeability on seepage velocity, temperature distribution, heat transfer and pressure drop are investigated.Simulations are performed for two cases: fully developed flow at the entrance of the porous media and developing flow, which are corresponding to the Reynolds numbers of Re=77.6 and Re=1553 respectively (U= 0.01 m/s and U= 0.2 m/s).... 

This thesis introduces a fast and accurate two-phase reservoir flow simulation procedure. The speed up is achieved by an upscaling technique where coarsening is applied to the detailed geological reservoir descriptions. This process results to two major error sources affecting the simulation accuracy significantly. The homogenization error is appeared when coarse scale data, such as equivalent permeability, is calculated from the available fine grid model information. It is shown that the error can be reduced adjusting coarse grid (non-uniform Cartesian) distribution. For the first time in this study, the grid distribution optimization is done based on “vorticity” map. In particular, the... 

Statistical studies indicate the fact that in Iran, like many other developing countries, a significant percentage of buildings are made of traditional materials and most of them are adobe buildings especially in rural areas. Furthermore, geological data indicates that Iran is located in alps-Himalayas seismic zone and exposed by destructive earthquakes and adobe buildings suffer the most damages comparing with other type of the structures. According to these explanations, this research deals with adobe buildings behavior and provides solutions for reinforcing them and improving the seismic response of these buildings. These studies include numerical modeling with finite elements methods by... 

In this thesis we consider the problem of distributed computation by many processors.We mainly concentrate on matrix multiplication problem in this thesis because of its importance. A distributed system consists of N worker processors and one master processor. The master processor should distribute the computation between workers and after computation in each of them, collect the results. In this thesis, we are going to mitigate the effect of straggler processors by using coding methods. Straggler processors can cause delays in the computation time.In this thesis, we firstly introduce a method to multiply any number of matrices in each other. The proposed method occurred in one shot without... 

The main goal of current investigation was partial reduction of Fe2O3 available in Hematite-rich ore to Magnetite by Fludization Bed method. The reductive gas, CO, was produced by incomplete combustion of Acetylene and Airmixed in inappropriate ratio. X-Ray Diffraction and X-Ray Florescence analyses were implemented in order to conducting qualitative analysis of present phases before and after reduction of the ore. Quantitative analysis of the same phases was also conducted by Titration. The latter analysis revealed the precise magnitude of available iron in each of the oxide containing phases. The chemical composition of the reactor gas was also determined before and after reduction... 

Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to... 

Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run... 

Lightweight clients are a type of blockchain users who do not store all the blocks in the blockchain due to limited resources. These users store only a small part of each block and when needed, request transactions from full nodes that store the entire blockchain. These users have no role in block validation and only want to receive transactions related to their addresses with proof of the inclusion in the block from full nodes.Since light clients rely on full nodes for receiving transactions, their privacy against full nodes is important. The current implementation of Bitcoin uses Bloom filters for privacy, but this offers very little privacy to the users.In this thesis, we study the... 

Soil-structure interaction has significant effect on dynamic behavior of the super structure. This effect is usually investigated in two separate parts, i.e., the Kinematic Interaction effect and the Inertial Interaction effect. The first modifies the input ground motion to the foundation as a result of difference in soil and foundation stiffness. The later, i.e., the II effect, introduces the effect of soil flexibility and radiation of waves into the supporting medium on the response of the structure. These effects are usually considered by introducing a replacement oscillator with modified natural period and damping ratio subjected... 

The  aim  of  this  work  is  to  investigate  some  theoretical  models  developed  in  recent years for describing electronic correlation and apply them to some special problems  and  metallicity  and  insulating  behavior  of  one  type  of  paramagnetic  systems. One  of  the  vast‐applied  and  effective  routines  for  investigating  the  strongly  correlated electron systems is Dynamical Mean Field Theory (DMFT). In the first part,  the  equations  of  DMFT  are  solved  on  nearly  real  frequency  axis  with  a  effective and more reliable solver a little parameter γ above the real axis. This approach  appears  fine  structures  that  can’t  be  captured  with  the ...