Sharif Digital Repository

Delay Tolerant Networks (DTNs) are sparse networks in which intermittent connectivity happens due to energy shortage or high mobility and long latency is unavoidable.These networks have a wide range of applications in our daily life such as internet of moving things. In delay tolerant networks, finding an end to end path between source and destination is almost impossible. Therefore, routing can’t be done based on finding an end to end path but it has to be done based on hop by hop sessions. In this thesis, we aim to represent an efficient routing algorithm for delay tolerant networks that can improve delivery probability, delivery cost and delivery latency.Our proposed routing algorithm is... 

This study presents the application of the doubly fed induction generator (DFIG) to reduce the frequency deviation and improve frequency of a power system. This has been done by proposing a wind turbine model and a new fuzzy controller. The fuzzy controller has been suggested to change the speed of the wind turbine rotor and modify the impacts of wind speed fluctuations on the output power. The fuzzy controller parameters are optimized using the genetic algorithm (GA) to achieve the appropriate transient response. A smart controller is combined with fuzzy controller to optimize the usage of wind turbine’s kinetic energy. Furthermore, the DFIG with the proposed controller participates in the... 

Polar codes have received much attention to the extent that they are selected as a channel coding scheme in the 5G standard. The successive cancellation list (SCL) decoder suffers from high decoding Latency and limited Throughput due to its sequential decoding nature. Another polar decoding approach is the iterative belief propagation (BP) decoder which is inherently parallel and allows for better Decoding Latency and Throughput. However, its main drawback is an error-correction performance loss compared to the CRC-aided successive cancellation list (CA-SCL) decoder. From previous works, the CRC-aided belief propagation list (CA-BPL) decoder that benefits from the parallel structure of the... 

Super-resolution means increasing the resolution so that the quality improves. This is defined for both image and video. In this regard, machine-learning based methods, especially convolutional neural networks, have shown great potential in recent years. Finding the right structure that can deliver high speed and accuracy is the key to solving the super-resolution problem.Despite the myriad of methods for image super-resolution, less attention has been paid to its generalization to video. This generalization should be such that more detail is created in the output using adjacent frames.In this dissertation, the existing methods for image and video super-resolution are reviewed, and then a... 

Increasing requirements of industries and research institutes to analytical results of interaction soil-foundation related systems, reveals the importance of the dynamic impedance functions than ever before. The dynamic impedance function relations are presented for massless rigid foundations which is possible to obtain dynamic response of foundations for different frequencies and masses accordingly. In this study, the dynamic impedance functions were investigated using physical modeling tests on sandy soil with finite thickness soil stratum over bedrock. The tests were carried out inside a steel container of dimensions 110.8m in length, width and height respectively which was filled into... 

In this thesis will investigate control performance of coupled buildings. Control of this structures will done using friction dampers based on passive and semi-active strategies.
A numerical study is employed to simulate a coupled building equipped with passive friction damper by using OpenSees software framework.
Semi-active friction damper is used on three groups of adjacent buildings. At first, a mathematical model of coupled buildings is established for each group. The variable friction dampers consist of an actuator, which is based on a piezoelectric stack that alters the normal force at the contact area. A clipping control algorithm considered in the numerical study for the... 

Detecting defects in financial statements is crucial because such defects can impact the transparency, accuracy, and reliability of financial reports and influence the decision-making of stakeholders. This study aims to provide a novel approach for identifying defects in the financial statements of companies listed on the Tehran Stock Exchange. In this research, a defect is defined as a difference in data items between audited and unaudited financial statements, which may indicate either unintentional or intentional deviations or signal a potential fraud. The data for this study was automatically collected from the Codal system and includes both audited and unaudited financial reports in the... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

Fatigue crack growth can have harmful effects on the reliability rotary machine. While an early warning to crack, can be used to extend the life of these expensive machines and increase reliability.Structural Vibration Condition Monitoring as a primary fault detection method, achieved to a lot amazing result and for this reason studies vibration behavior of cracked rotational shaft is a big issue for engineers of dynamic machine.In this research, first check the fault detection methods based on structural vibration condition monitoring, mode shape methods were extracted. Then by modeling rotational shaft in computer and creation of crack on it, fault detection quality of these methods have... 

It is important to provide an appropriate and economically method with technical and engineering considerations to stabilize excavated underground spaces. The necessity of this, especially for the construction of underground metro stations located in the cities which faces many problems, is more evident. In this research, it has been tried to introduce an optimal method according to the type of area for the construction of the underground station. In order to obtain stress and strain condition in structural elements and surface deformations due to different stages of excavating, numerical modeling in FLAC3D has been used. By examining the parameters that affect the sustainability of this... 

In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of... 

Co-movement between inflation and nominal interest in response to an interest rate shock, dubbed neo-fisherianism, has been the subject of contentious debate since the advent of non-inflationary ZLB environment. We design an economic model rich with banking features to understand the economic responses to permanent and long-term interest rate shocks. We find that responses to a permanent positive interest rate shock depend on the monetary authorities’ speculation of the new long-term inflation rate, with the most probable outcome being a permanent increase in inflation. Responses to a long-term positive interest rate shock depict an increase and then decrease in inflation. We also discover... 

In this study, we aim to learn representations from microscopic cell images that effectively capture the features of drugs affecting the cells, allowing us to identify effective drugs for treating a disease. We employ two parallel learning paths using predictive and generative models. Specifically, we have achieved a predictive model on the RxRx19a dataset that, unlike previous models, is interpretable, optimized, and robust to dras- tic changes in drug properties. Additionally, we have developed the first generative model on this dataset, which not only generates high-quality images but also discovers a meaningful latent space. This latent space divides the representation into relevant... 

Influence of excavating the Tehran metro line 7 tunnel on surface settlement, stresses and deformations induced in Towhid tunnel is investigated using numerical modeling. Construction of Metro tunnel as the new one must be carried out without imposing any damage to the Towhid tunnel as the existing tunnel. Towhid tunnel is a set of twin tunnels along the Chamran highway in Tehran. The tunnels were constructed using sequential excavation method and lined with cast in place reinforced concrete; on the other side metro line 7 is being constructed using 2 EPB tunnel boring machines and lined with reinforced concrete segments. This research consists of the study of the effects of pillar width,... 

Foam injection for enhanced oil recovery is concerned by petroleum engineers because it decreases adverse effects of fingering and gravity segregation caused by the injected fluid .Obviously foam stability is an important factor in the efficiency of this process. So investigating it is an imperative. One of the ways that less studied and can improve foam stability is using of nanoparticles. In this project effect of nanoparticles on foam stability and displacement mechanism during foam flooding has been discussed.
Study consisted of two sets of experiments. In the first part, the static foam stability in the presence of silica nanoparticles has been investigated. Also influence of... 

Miscible displacement in fluid flowing through a porous medium plays an important role in many environmental and industrial applications; for instance, miscible displacements in enhanced oil recovery processes and pollutant spreading in groundwater. A large number of numerical approaches have been developed to solve the advection-dispersion equation that describes the behavior of miscible displacement in porous media. Most of these numerical models suffer from numerical dispersion. Random walk seems to be an effective method to overcome this problem especially in heterogeneous media. Here, a random walk model was developed and used for simulating miscible displacement in heterogeneous porous... 

Due to the increasing spread of metal industries and the need for raw material as feed for electric furnaces in order to produce cast iron and steel, as well as scrap deficiency and rising prices, the use of sponge iron as a substitute for scrap was considered in this project Therefore, in order to achieve the chemical analysis of the sorel ingot that is special for spherical graphite cast iron production with low manganese and chromium content, the direct reduction process was carried out using tunnel kiln method on low-manganese iron ore concentrate.After the investigation on direct reduction parameters including the saggers and coal grading,the produced sponge iron has melted in...