Sharif Digital Repository

A complete cycle of droplet nucleation, growth, coalescence and jumping on different textured hydrophobic and superhydrophobic surfaces is studied for the first time, using a 2-D double distribution function thermal lattice Boltzmann method. First, droplet nucleation mechanism on smooth and rough surfaces is studied in detail. The results reveal the presence of cooled vapor layer instability in the condensation on completely smooth surfaces. However, on the rough surfaces and near the roughness a completely different mechanism is observed and the nucleation occurs on the roughness wedges. Also, the condensation on different textured surfaces with nominal contact angles θa=90°,120°,155° is... 

Nucleation and growth of condensing droplets on horizontal surfaces are investigated via a 2-D double distribution function thermal lattice Boltzmann method. First, condensation on completely uniform surface is investigated and different mechanisms which cause dropwise and filmwise condensation are studied. The results reveal the presence of cooled vapor layer instability in the condensation on completely smooth surfaces. In the second step, condensation on chemically heterogeneous surfaces is investigated. Moreover, the effect of non-uniformity in the surface temperature is also studied. The results indicate that the vapor layer instability and the nucleation start from the heterogeneities.... 

Recently, with the growth and development of distributed generation (DGs) and energy storage systems (ESSs), as well as smart control equipment, microgrids (MGs) have been developed. Microgrids are comprised of a limited number of constitutive parts, including loads, DGs, ESSs, and electric vehicles (EVs). This paper presents a novel scheme to manage active and reactive powers, based on DGs, ESSs, and EVs to reduce the total operation cost including power generation and emission costs. Simultaneous management of active and reactive power makes it possible to consider grid operation constraints together. In the proposed schedule, the vehicles are assumed to be plug-in hybrid electric... 

In this paper, a 2D boundary element approach able to model viscoelastic functionally graded materials (FGM) is presented. A numerical implementation of the Somigliana identity for displacements is developed to solve 2D problems of exponentially graded elasticity. An FGM is an advanced material in which its composition changes gradually resulting in a corresponding change in properties of the material. The FGM concept can be applied to various materials for structural and functional uses. Our model needs only the Green's function of nonhomogeneous elastostatic problems with material properties that vary continuously along a given dimension. We consider the material properties to be an... 

In this work, a boundary element formulation for 2D linear viscoelastic solid polymers subjected to body force of gravity has been presented. Structural analysis of solid polymers is one of the most important subjects in advanced engineering structures. From basic assumptions of the viscoelastic constitutive equations and the weighted residual techniques, a simple but effective boundary element formulation is implemented for standard linear solid (SLS) model. The SLS model provides an approximate representation of observed behavior of a real advanced polymer in its viscoelastic range. This approach avoids the use of relaxation functions and mathematical transformations, and it is able to... 

A new low voltage bandgap reference (BGR) in CMOS technology, with high power supply rejection ratio (PSRR) is presented. The proposed circuit uses a regulated current mode structure and some feedback loops to reach a low voltage, low power and high PSRR voltage reference. The circuit was designed and simulated in 0.18um CMOS technology, with a power supply of 1.4 volt. The results show PSRR is 65dB at 1MHz and the output voltage variation versus temperature (-40 to 140) is less than 0.1%. This circuit shows robustness against process variation. ©2008 IEEE  

Dynamic behavior of concrete specimens is investigated experimentally and numerically by split Hopkinson pressure bar (SHPB) tests. In order to accurately determine dynamic properties of brittle materials such as concrete, specimens should be subjected to particular pulse loading that can be generated by using pulse shapers. Choosing proper pulse shaper dimensions helps to obtain dynamic stress equilibrium, achieve constant strain rate and minimize pulse oscillation in the concrete specimens. To this end, SHPB tests are performed for concrete specimens and effective parameters on shaping pulses such as striker bar velocity, diameter and thickness of the pulse shaper are studied... 

The bond of fiber-reinforced polymer (FRP) reinforcement is expected to be more sensitive to the strength and geometry of the ribs than conventional steel reinforcement. In this study, the effect of carbon fiber mat anchorage on the pullout behavior of glass fiber-reinforced polymer (GFRP) bars embedded in normal concrete is studied. The studied parameters were the compressive strength of the concrete (16 MPa, 24 MPa, and 37 MPa), and, the length and diameter of the anchorage. In total, 15 variables were studied. Ribbed GFRP bars with 10 mm nominal diameter and 80 mm embedment length, ld, (which is 8 times the bar diameter) were considered. Based on the results for concretes with the...