Sharif Digital Repository

Nucleation and growth of condensing droplets on horizontal surfaces are investigated via a 2-D double distribution function thermal lattice Boltzmann method. First, condensation on completely uniform surface is investigated and different mechanisms which cause dropwise and filmwise condensation are studied. The results reveal the presence of cooled vapor layer instability in the condensation on completely smooth surfaces. In the second step, condensation on chemically heterogeneous surfaces is investigated. Moreover, the effect of non-uniformity in the surface temperature is also studied. The results indicate that the vapor layer instability and the nucleation start from the heterogeneities.... 

A complete cycle of droplet nucleation, growth, coalescence and jumping on different textured hydrophobic and superhydrophobic surfaces is studied for the first time, using a 2-D double distribution function thermal lattice Boltzmann method. First, droplet nucleation mechanism on smooth and rough surfaces is studied in detail. The results reveal the presence of cooled vapor layer instability in the condensation on completely smooth surfaces. However, on the rough surfaces and near the roughness a completely different mechanism is observed and the nucleation occurs on the roughness wedges. Also, the condensation on different textured surfaces with nominal contact angles θa=90°,120°,155° is... 

The bond of fiber-reinforced polymer (FRP) reinforcement is expected to be more sensitive to the strength and geometry of the ribs than conventional steel reinforcement. In this study, the effect of carbon fiber mat anchorage on the pullout behavior of glass fiber-reinforced polymer (GFRP) bars embedded in normal concrete is studied. The studied parameters were the compressive strength of the concrete (16 MPa, 24 MPa, and 37 MPa), and, the length and diameter of the anchorage. In total, 15 variables were studied. Ribbed GFRP bars with 10 mm nominal diameter and 80 mm embedment length, ld, (which is 8 times the bar diameter) were considered. Based on the results for concretes with the... 

This study investigates the tensile properties of various GFRP laminates after exposure to elevated temperatures. Fiber configuration, exposure temperature and laminate thickness were considered as the test variables. A total number of 180 specimens were tested in tension to obtain the mechanical properties of GFRP laminates. Alongside the mechanical tests, SEM analyses were conducted on selected samples before testing to investigate the resin, fiber, and their interface damages. Regardless of the sample type, it was generally observed that the reduction rate in the tensile strength increased with an increase in the exposure time and a decrease in the laminates’ thickness. The results of... 

Nonlinear numerical modeling of masonry-infilled frames is one of the most complicated problems in structural engineering field. This complexity is attributed to the existence of joints as the major source of weakness and material nonlinearities as well as the infill-frame interaction which cannot be properly modeled using the traditional finite element methods. Although there are many numerical studies available on solid masonry-infilled steel frames' behavior, however, few researches have been conducted on infilled frames with openings. In this paper a two-dimensional numerical model using the specialized discrete element method (DEM) software UDEC (2004) is developed for the nonlinear... 

The modified eccentricity connectivity polynomial of a connected graph G is defined as Ξ(G; x)=Σ u∈V(G)d G(u)x ε′G (u), where ε′ G(u)=Σ v∈NG(u)εG(u)and d G(u) is the degree of u in G. In this paper modified eccentric connectivity polynomial is computed for several classes of composite graphs  

We theoretically study a hybrid plasmonic-photonic cavity setup that can be used to induce and control long-distance heat transfer between molecular systems through optomechanical interactions. The structure we propose consists of two separated plasmonic nanoantennas coupled to a dielectric cavity. The hybrid modes of this resonator can combine the large optomechanical coupling of the sub-wavelength plasmonic modes with the large quality factor and delocalized character of the cavity mode that extends over a large distance (∼µm). We show that this can lead to effective long-range heat transport between molecular vibrations that can be actively controlled through an external driving laser. ©... 

Position sensorless control of ac machines at zero and low speed is possible using high-frequency carrier injection methods. These methods utilize anisotropic properties of rotor. Therefore, they may lose their efficiency for nonsalient machines or machines with small rotor saliency. In these machines, measurement noise and offset, existing delays, as well as model uncertainties may lead to inaccurate estimation of rotor position. Stator resistance which is usually neglected in these methods may also lead to a considerable error especially in machines with small rotor saliency. In this paper, a new position estimation method is presented, and it is shown that in comparison to conventional... 

The aim of current research is to investigate the substrate electropolishing effect on corrosion resistance of Ni-Mo thin films. For this purpose, corrosion resistance of coatings deposited on mild steel substrates, that was electropolished or mechanically polished, have been compared in 3.5 wt.% NaCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The structural properties of Ni-Mo thin films were evaluated using X-ray diffraction (XRD) and their morphology, microstructure and chemical composition were also investigated using scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). Temperature and acidity of deposition... 

Given the importance and complexity of the three-dimensional (3D) neutron transport equation solution, in the current research, a new Modular Ray Tracing (MRT) Algorithm and 3D characteristic kernel for heterogeneous structures are presented. Improvement of memory management and cache coherency are achieved to some acceptable level. Also, parallel implementation of transport algorithm utilizing OpenMP, cause significant reduction in runtime. To validate our Algorithm, first, a self-constituted pin cell and a lattice arrangement are modeled and results are compared with Monte-Carlo simulation. Second, the well-known 3D benchmark, Takeda model one and two, are investigated and results compared... 

Present research represents the application of artificial neural networks to predict the chemical composition of electrodeposited Ni-Mo thin films. Artificial neural networks commonly are utilized as a prediction tools so that these networks could approximately find kind of logic relationships between inputs and target; they fitted appropriate coefficient and weighting factors to the inputs which are proportional to their importance. In order to evaluate the model developed, experimental results were compared with the predicted ones. However, more data are required to train more reliable prediction models, presents study revealed an acceptable error less than 1% between predicted values and... 

In this experimental study the effect of physical and thermal properties of various FRP bars on their performance under elevated temperatures are investigated. The parameters included the bars' diameter, type of fiber, type of resin, fiber to matrix ratio, and thermal properties were studied. Moreover, ANOVA (ANalysis Of VAriance) was performed in order to investigate the contribution of each variable on the obtained results. The results showed that in addition to the temperature, the bars' diameter, type of fiber, type of resin, and thermal properties (Tg and Td) of the FRP bars have contributions to the results, while the fiber to matrix ratio was found to be an ineffective factor. It was... 

This paper presents the creep behavior of various FRP (GFRP, CFRP, and hybrid) bars in order to investigate the effects of different parameters, including the applied stress levels, bar diameter, and the type of fiber and resin in the creep behavior of FRP bars. The creep strains versus time curves were experimentally obtained for 83 days. Moreover, a statistical study, including analysis of variance (ANOVA) and linear Bayesian regression was conducted to investigate the contribution of the studied parameters. The results showed that in GFRP bars the ratio of ultimate creep strain to the initial elastic strain decreased when the applied stresses on the bars exceeded 30% of their ultimate... 

We explore whether localized surface plasmon polariton modes can transfer heat between molecules placed in the hot spot of a nanoplasmonic cavity through optomechanical interaction with the molecular vibrations. We demonstrate that external driving of the plasmon resonance indeed induces an effective molecule-molecule interaction corresponding to a heat transfer mechanism that can even be more effective in cooling the hotter molecule than its heating due to the vibrational pumping by the plasmon. This mechanism allows us to actively control the rate of heat flow between molecules through the intensity and frequency of the driving laser. © 2019 American Physical Society  

Control charts are useful tools of monitoring quality characteristics. One of the problems of employing a control chart is that the time it alarms is not synchronic with the time when assignable cause manifests itself in the process. This makes difficult to search and find assignable causes. Knowing the real time of manifestation of assignable cause (change point) helps to find assignable cause(s) sooner and eases corrective actions to be taken. In this paper, a probabilistic neural network (PNN)-based procedure was developed to estimate the variance change point of a normally distributed quality characteristic. The PNN was selected based on trial and error among different types of... 

A substantial part of this paperwas published in volume 8755 of the series LectureNotes in Computer Science, page 11–22, Title of the book: Social Robotics, 6th International Conference, ICSR 2014, Sydney, NSW, Australia, October 27–29, 2014, ISBN: 978-3-319-11972-4, article title: Impact of a Social Humanoid Robot as a Therapy Assistant in Children Cancer Treatment, by Minoo Alemi, Ali Meghdari, Ashkan Ghanbarzadeh, Leila Jafari Moghadam and Anooshe Ghanbarzadeh. The authors apologize for not having referenced to the previously published article  

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption...