Sharif Digital Repository

The novel mixed ligand complexes [M(bpy)(phen-dione)](PF6)2 (M = Zn(II), Cd(II) and Hg(II), bpy = 2,2′-bipyridine and phen-dione = 1,10-phenanthroline-5,6-dione) have been synthesized and characterized by elemental analysis, IR, 1H NMR and electronic absorption spectroscopies. The ν(C=O) of coordinated phen-dione in these complexes are very similar to the free phen-dione ligand showing that phen-dione is not coordinated to metal ion from its C=O sites. Absorption spectra of the complexes show two absorption bands for intraligand transitions. These absorption bands show dependence to the dielectric constant of solvent. These complexes exhibit an intensive fluorescence band around 535 nm in... 

The mononuclear complexes of Zn(II), Cd(II) and Hg(II), [Zn(phen-dione)Cl2], [Cd(phen-dione)Cl2] and [Hg(phen-dione)Cl2], where phen-dione = 1,10-phenanthroline-5,6-dione, have been synthesized and characterized by elemental analysis and IR, 1H NMR and electronic absorption spectroscopies. The ν(C=O) of coordinated phen-dione ligands in these complexes shows that the phen-dione is not coordinated to metal ion from its C=O sites. Electronic spectra of the complexes show two absorption bands for intraligand transitions. These absorption bands show dependence on the dielectric constant of solvents. These complexes exhibit an intense fluorescence band around 545 nm in DMSO when the excitation... 

The chemical preparation and crystal structure for a 4,4′- azodi(phenylcyanamide) salt) in the solid state are reported. This compound crystallizes in the triclinic space group P with the following unit cell parameters: a = 9.759(3) Å, b = 11.237(4) Å, c = 11.919(4) Å, α = 95.54(3)°, β = 98.50(3)°, γ = 109.39(2)°, Z = 1 and V = 1204.4(7) Å3. The 4,4′-azodi(phenylcyanamide) dianion, azodicyd2-, is approximately planar, with the cyanamide groups (-N=C=N) in an anti conformation relative to each other and the azo group (-N=N-) adopting the more thermodynamically stable trans conformation. The crystal X-ray analysis shows that there are one azo molecule cation, two tetrabutylammonium cations and... 

This paper focuses on the effects of low temperature (subzero) treatments on microstructure and mechanical properties of H13 hot work tool steel. Cryogenic treatment at -72 °C and deep cryogenic treatment at -196 °C were applied and it was found that by applying the subzero treatments, the retained austenite was transformed to martensite. As the temperature was decreased more retained austenite was transformed to martensite and it also led to smaller and more uniform martensite laths distributed in the microstructure. The deep cryogenic treatment also resulted in precipitation of more uniform and very fine carbide particles. The microstructural modification resulted in a significant... 

The effect of Rare earths addition to AZ91 magnesium alloy and its influence on the microstructure and mechanical properties was investigated in this study. Addition of cerium rich misch metal to AZ91 alloy resulted in formation of needle shape particles, which had a very high thermal stability, providing superior mechanical properties compared to AZ91 magnesium alloy. As a result, the grain boundaries were less susceptible for grain boundary sliding at high temperatures. The steady state creep rates were specified and for the AZ91 alloy and the results indicate a mixed mode of creep behavior, with some grain boundary effects contributing to the overall behavior. However for the RE added... 

The effect of Al content and Si addition on the microstructural and creep properties of Mg-Al-RE alloys was investigated in this study. The steady state creep rates were specified and it was found that the creep behavior of the alloy, which is dependent on the stability of the near grain boundary microstructure, was improved by the RE and Si addition. For the AZ91 alloy, the results indicate a mixed mode of creep behavior, with some grain boundary effects contributing to the overall behavior. However for the RE and Si added samples, sliding of grain boundaries was greatly suppressed and the dislocation climb controlled creep was the dominant deformation mechanism. Analysis of creep rates... 

This paper focuses on the effect of deep cryogenic treatment (-196 °C) on microstructure and mechanical properties of AZ91 magnesium alloy. The execution of deep cryogenic treatment on samples changed the distribution of β precipitates. The tiny laminar β particles almost dissolved in the microstructure and the coarse divorced eutectic β phase penetrated into the matrix. This microstructural modification resulted in a significant improvement on mechanical properties of the alloy. The steady state creep rates were measured and it was found that the creep behavior of the alloy, which is dependent on the stability of the near grain boundary microstructure, was improved by the deep cryogenic... 

This article aims to compensate the velocity and position errors that exist when the star sensor starts to work in a strapdown inertial navigation system aided by celestial navigation. These systems are integrated via unscented Kalman filter to estimate the current attitude and the gyros fixed bias, precisely. Since an accurate integration is desired, the nonlinear attitude equations are utilized in filter and these equations are propagated through a precise discretization method. Then, implementing the back-propagation and smoothing techniques, the initial attitude and the accelerometers fixed bias are also estimated. Finally, carrying out a parallel navigation, the velocity and position... 

In this paper, the performance of the benzene gas detection sensor in the air is optimized by an experimental design method. So in this work, Nanostructured thin films of ZnO and Zn2SnO4 were prepared in wurtzite form via a facile atmospheric pressure chemical vapor deposition (CVD) method, using metallic zinc and tin precursors. Characterization of the gas sensor was performed by using Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and surface area analysis (using BET method). The results show that Zn2SnO4 nanowire network exhibited good sensitivity at 299 °C temperature to low concentrations (100 ppb) of Benzene which can be potentially used as a resistive gas sensor.... 

Abstract: In the current paper, the removal efficiency of metronidazole (MNZ) using a catalytic ozonation process (COP) in the presence of magnesium oxide nanocrystals, as a catalyst, was investigated in deionized water and compared with a sole ozonation process (SOP). The influence of several operational factors on both removal processes was evaluated: solution pH, MgO dosage, initial MNZ concentration, and reaction time. Biodegradability improvement, mineralization rate, oxidation intermediates, and toxicity were also studied for the COP. The results showed that MgO nanocrystals accelerated MNZ removal compared to the SOP. The optimum pH for both SOP and COP was obtained at 10 and optimum... 

Treatment of dye pollution containing C.I. Acid Red 14 (AR14) by a coupled photocatalytic process was studied. Titanium dioxide, in the form of anatase and rutile, and zinc oxide, were used as photocatalysts. The investigated photocatalysts were Aldrich-produced nanopowders with crystallites of a mean size of 20-30 nm and a specific surface area of about 50 m 2/g. A comparison of TiO 2(anatase), TiO 2(rutile), TiO 2(a,r), and ZnO for the decolorization of the AR14 solution was performed. Results showed that color removal followed the decreasing order of TiO 2(a,r), ZnO > TiO 2(a,r) > TiO 2(a), ZnO > TiO 2(r), ZnO >TiO 2(a,r) > TiO 2(a) > ZnO > TiO 2(r). Response surface methodology (RSM) was... 

In order to evaluate the seismic behavior of confined masonry buildings, based on Iranian seismic code design, a single storey full-scale unreinforced confined brick masonry building has been constructed on the shaking table facility at the Earthquake Engineering Research Center (EERC) of Sharif University of Technology. The 4 by 4 meter model consists of four brick masonry walls confined with reinforced mortar tie-columns and steel bond beams, with a traditional jack-arch roof system. Three of the wall panels contained openings of different sizes and geometries. The model was subjected to the scaled earthquake records of Bam, Tabas and El Centro, as well as a harmonic acceleration with... 

Electrochemical activity of TiO2 nanotube arrays (NTAs) is restricted by a wide band gap of TiO2. To overcome this restriction, we considered systematic research on two effective methods of doping of TiO2 NTAs such as the N-doping and electrochemical reductive doping and predicting the proper application of them. Band gap narrowing was occurred from 3.16 eV for undoped TiO2 NTAs to 2.9 and 2.7 eV at N-doped and self-doped TiO2 ones respectively. The electrochemical responses of the TiO2 NTAs before and after doping were examined by cyclic Voltammetry (CV) curve. To understand the electrochemical behavior of the undoped and doped TiO2 NTAs, electrochemical impedance spectroscopy (EIS) was... 

Although morphological disorder of nanotube structure is further down than the nanoparticular electrode, its density of traps are the hindering effects in the charge transport. In this study, crack-free TiO2 nanotube membranes, which obtained through a re-anodizing process, are fixed on transparent fluorine–tin-oxide glass by applying a few drops of Titanium Isopropoxide without needing the TiO2 powder paste. Front-side illuminated dye sensitized solar cells fabricated by undoped, N-doped and blue TiO2 nanotube membranes are investigated. The electrical characteristics of TiO2 nanotube based dye sensitized solar cells are followed by theoretical analysis using simple one-diode model.... 

In this study, an attempt has been made to fabricate Cu-SiC nanocomposites by flake powder metallurgy and high-pressure torsion processing techniques at room temperature. Pure Cu and a mixture of Cu and nano-sized SiC powders were mechanically milled separately for 3 h and then green compacts were prepared by uniaxial pressing under 1 GPa pressure. The green compacts experienced 6-turn high-pressure torsion under a pressure of 6 GPa to prepare bulk Cu and Cu-SiC samples. The microstructures of the consolidated samples were characterized using an X-ray diffractometer and a high resolution scanning/transmission electron microscope, and the mechanical properties were evaluated by microhardness,... 

HVOF-sprayed coatings (WC-17%Co) and hard chromium coatings corrosion resistances have been compared through electrochemical polarization test in 3.5% NaCl solution. WC-17%Co alloy coatings were deposited on mild steel substrates by High Velocity Oxy-Fuel (HVOF) spray process. The layers of standard and crack free hard chromium coatings were prepared by using Direct Current (DC) and Pulse Current (PC) electroplating process on the mild steel substrates. Hard chromium coatings was characterized as a reference material, to verify whether HVOF-sprayed coatings are suitable as a hard chromium coatings replacement. The microstructure of the coatings was examined by OM, SEM and XRD. Standard hard... 

Polycarboxylate superplasticizers based on acrylic acid (AA) and maleic anhydride (MAn) were synthesized via free-radical copolymerization with an ethylene glycol monomer and characterized. The copolymerization temperature (ranging from 50 to 90 °C) appeared to be the key operating factor governing the chemical structure of the superplasticizers. The chemical structures of the products were analyzed by gel permeation chromatography, whereas an optimized sample was further analyzed by Fourier transform infrared spectroscopy and 1H-NMR. Superplasticizers of the AA and MAn classes were then incorporated into concrete, and their performances were measured by slump and slump loss tests, where a... 

In feature-based image registration, feature selection and reduction methods play an important role in decreasing computational burden of these operations. In this paper, a new approach is introduced to reduce the dimension of extracted feature vectors of MR images. This approach is based on the selection of the maximum and minimum responses of the alpha stable filter for the MR images over the extracted features with different orientation in frequency domain. This algorithm selects the rotation invariant features which are suitable for image registration purposes. It has been shown that these features could efficiently describe the image elements. The discriminating ability of the features... 

Iran as one of the countries located on the Alpine-Himalayan seismic belt has recently experienced a few number of catastrophic earthquakes. A well-known index of how buildings are affected by earthquakes is through assessment of probable Peak Ground Acceleration (PGA) and structures' response spectra. In this research, active faults around Kerman and Birjand, two major cities in eastern parts of Iran, have been considered. Seismic catalogues are gathered to categorize effects of surrounding faults on seismicity of the region. These catalogues were further refined with respect to time and space based on Knopoff-Gardner algorithm in order to increase statistical independency of events.... 

This paper introduces a new method for improving the inertial navigation system errors using information provided by the camera. An unscented Kalman filter is used for integrating the inertial measurement unit data with the features’ constraints extracted from the camera’s image. The constraints, in our approach, comprise epipolar geometry of two consecutive images with more than 65% coverage. Tracking down a known feature in two consecutive images results in emergence of stochastic epipolar constraint. It emerges in the form of an implicit measurement equation of the Kalman filter. Correctly matching features of the two images is necessary for reducing the navigation system errors because...