Sharif Digital Repository

Protein mass spectra pattern recognition is a new forum in which many machine learning algorithms have been conducted to enhance the chance of early cancer diagnosis. The high-dimensionality-small-sample (HDSS) problem of cancer proteomic datasets still requires more sophisticated approaches to improve the classification accuracy. In this study we present a simple ensemble strategy based on measuring the generalizing capability of different subsets of training data and apply it in making final decision. Using a limited number of biomarkers along with 5 classification algorithms, the proposed method achieved a promising performance over a well-known prostate cancer mass spectroscopy dataset.... 

Parameters of the PC-SAFT Equation of State (EoS) for pure components are generally determined by matching the saturation pressure and liquid density experimental data. These experimental data are unavailable for petroleum cuts and plus fractions of the petroleum reservoir fluids. In this work, new correlations as functions of specific gravity and molecular weight were developed to estimate the PC-SAFT parameters of petroleum cuts with unknown composition. It was shown that the proposed correlations accurately estimate the PC-SAFT parameters of the pure components published in the literature. Then, the obtained correlations were used and the PVT experimental data for various real reservoir... 

In this work, a new automatic workflow for accurate optimal pseudo-component generation from gas condensate mixtures with a large number of components is presented. This workflow has a good insight into thermo-physical and critical properties and introduces only a small amount of loss of information and EOS flexibility. In this regard, the fuzzy clustering is used to classify the components in the mixture based on the similarities in the critical properties. The mixing rules are then applied to find group properties. Two different approaches for components association in clustering process are investigated with several numbers of groups. The mathematical validity of the groups is controlled... 

The strong bases statistical associated fluid theory (SAFT) equations of state allow modeling for a wide range of scales and applications. The equilibrium calculations are very time-consuming in SAFT-based family of equations of state; therefore the number of components used in describing a fluid mixture must be reduced by grouping. On the other hand, in some applications it is required to retrieve the detailed fluid description from equilibrium calculation performed on the lumped fluid description. The purpose of this paper is to develop a systematic approach for lumping and delumping with equilibrium calculations using the Perturbed Chain (PC)-SAFT equation of state. The methodology... 

Various EEG features have been used in depth of anesthesia (DOA) studies. The objective of this study was to And the excellent features or combination of them than can discriminate between different anesthesia states. Conducting a clinical study on 22 patients we could define 4 distinct anesthetic states: awake, moderate, general anesthesia, and isoelectric. We examined features that have been used in earlier studies using single-channel EEG signal processing method. The maximum accuracy (99.02%) achieved using approximate entropy as the feature. Some other features could well discriminate a particular state of anesthesia. We could completely classify the patterns by means of 3 features and... 

APS (3-Aminopropyl) trimethoxysilane) and APhS (p-Aminophenyl) trimethoxysilane) are the most commonly used linkers on a silicon surface. We investigate the surface properties of the structures, including APS or APhS on a silicon substrate. The studied structures consist of APS or APhS linkers with one, two, or three bonds with a substrate, which is a thin layer of Si with crystal orientation 〈1 0 0〉 or 〈1 1 1〉. Using a first-principles study based on density functional theory (DFT), we investigated the electronic and optical properties of the silicon-linker interface, such as interface states, orbital location, dielectric function, and photon absorption. The effects of linker type, number... 

Volumetric and equilibrium calculations for the natural gas and oil defined by a large number of components are not feasible in applications like compositional reservoir simulation. Therefore, the fluid mixture is grouped to reduce computational load and to make faster calculations. However, for several reasons, it is required to have the detailed fluid composition rather than the lumped one. In this work, an improved delumping method is presented to retrieve the phase composition of the detailed mixture based on the grouped mixture thermodynamic calculations. The method is based on previously proposed delumping techniques for non-cubic equation of state (Assareh et al. in Fluid Phase... 

Energy storage and supply in solar thermal collector systems rely heavily on phase change materials (PCM). It is vital to establish the appropriate values for energy discharge time (tPCM) and net amount of stored energy (Qnet) within the PCMs in order to increase the efficiency of solar thermal collectors. For this study, we implemented a multi-objective evolutionary algorithm based on decomposition (MOEA/D) for the optimization process using the MATLAB simulator software. The simulation findings show that, under ideal circumstances where tPCM is large and Qnet is low, these two goal functions are inversely connected to one another. According to an analysis of how input parameters affect the... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite...