Sharif Digital Repository

The aim of this paper is developing a new hierarchical model to evaluate and rank the sawability (power consumption) of carbonate rock with the use of effective and major criteria, and simultaneously taking subjective judgments of decision makers into consideration. The proposed approach is based on the combination of Fuzzy Analytic Hierarchy Process (FAHP) method with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods. FAHP is used for determining the weights of the criteria by decision makers, and then rankings of carbonate rocks are determined by TOPSIS. The proposed method is applied for Iranian ornamental stone to evaluate the power consumption in rock... 

In the present study, an in-situ, two-step, highly controllable, fast, green, and facile strategy for fabricating the bimetallic cobalt-zinc-based metal-organic frameworks (MOFs) is employed for designing a non-enzymatic glucose sensing platform. The structural characterization, as well as the phase investigation of materials in each step, are assessed by X-ray diffraction, energy-dispersive X-ray spectroscopy, elemental mapping, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Furthermore, the electrocatalytic activity of the CoZn-BTC/GC fabricated electrode toward the electro-oxidation of glucose is examined by various electrochemical techniques,... 

The aim of this study is to investigate the effect of the rock brittleness indexes on the specific ampere draw of the circular diamond saws. In this study, twelve rock types belonging to granite and carbonate rock were cut with two different types of circular diamond saws on a fully instrumented laboratory-sawing rig at different feed rate and depths of cut. Rock samples were collected from factories from Iran for laboratory tests and uniaxial compressive strength and tensile strength were determined. The brittleness of B 1 (the ratio of compressive strength to tensile strength), B 2 (the ratio of compressive strength minus tensile strength to compressive strength plus tensile strength), and... 

Ornamental stone sawability is important in predicting the prime cost of production and planning of the stone quarries and factories. Ornamental stone sawability with two standard methods, wire and circular sawing, is dependent on many parameters including; the stone that be sawn and machine characteristics and saw operating characteristic. The investigation of these parameters and the determination of the optimum working conditions for sawing machines in the stone industry is significant for establishing the most suitable and economic usage of the sawing method in the future. Up to now, various attempts have been made to determine these parameters. In this review paper, the important... 

Re-circulating cooling water systems offer the means to remove heat from a wide variety of industrial processes that generate excess heat. Such systems consist of a cooling tower and a heat-exchanger network that conventionally has a parallel configuration. However, reuse of water between different cooling duties allows cooling water networks to be designed in a series arrangement. This results in performance improvement and increased cooling tower capacity. In addition, by the integration of ozone treatment into the cooling tower, the cycle of concentration can be increased. The ozone treatment also dramatically reduces the blow-down that, in turn, is environmentally constructive. In this... 

The prediction of rock sawability is very important in the cost estimation and the best planning of the plants. Rock sawability depends on the machine characteristics and rock mechanical properties. In this study, a new classification was developed with the respect to rock mechanical properties such as Uniaxial Compressive Strength, Brazilian tensile strength, Schmidt hammer value and Los Angeles abrasion loss. Using this system the carbonate rock sawability index (CRSi) of several types of carbonate rock was evaluated and classifi ed into fi ve categories and then a new model was developed with the respect to CRSi and machining characteristics by using the statistical analyses for... 

The 2,6-bis(diphenylphosphino)pyridine/palladium catalytic system successfully catalyzes the Heck coupling reaction of less reactive aryl chlorides as well as aryl bromides with styrene to give the corresponding olefins in reasonable yields. TBAB (tetrabutylammoniumbromide) as an additive was found to be essential for these reactions. The results of Heck reaction exhibited a high selectivity (>99/1) favoring the trans product  

In natural gas pressure boosting stations, air coolers are used to reduce the gas temperature. Pressure drop as an essential factor in determining the energy performance of any pressure boosting station has a significant impact on the overall performance of the gas transmission. In this paper, a laboratory pilot is designed to investigate the effect of pressure drop reduction on the use of heating pipes at the air coolers. In addition, as a case for a gas pressure boosting station, its impact over energy performance index and pressure drop parameter has been calculated through simulating. The results show, implemented PHP tubes in an air cooler, lead to reduce tube length and improve... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

The main purpose of this study is to compare the many different rock properties in the rock sawability. The comparison was realized with the combination of the analytic hierarchy process (AHP) and Fuzzy Delphi method and also TOPSIS method. The analysis is one of the multi-criteria techniques providing useful support in selecting among several alternatives with different objectives and criteria. FDAHP method was used in determining the weights of the criteria by decision makers and then ranking the sawability of the rocks was determined by TOPSIS method. The study was supported by the results obtained from a questionnaire carried out to know the opinions of the experts in this subject.... 

AC electric arc furnaces (EAFs) highly reduce power quality of the network by generating disturbances such as flicker and harmonics. These disturbances are due to the nonlinear electromagnetic and thermal field behaviors of the AC arcs. Analysis of these nonlinear behaviors is required for improving power quality in the network. This paper presents a three-dimensional finite element modeling of the electromagnetic fields in an AC three-phase electric arc furnace. The model includes the electrodes, arcs and molten bath. Current density, voltage and magnetic field intensity in the arcs, molten bath and electrodes are predicted as a result of applying the three-phase AC voltages to the EAF.... 

Insulated rail joints (IRJs) are widely used in signaling and broken rail identification systems. Track deterioration adjacent to IRJ is frequent due to excessive dynamic forces generated at IRJs by the repetitive passage of the ongoing traffic. Hence, they exhibit low service life and are considered high-risk elements and maintained through high standards. With a view to increase operational speed and the annual operational throughput, many improved structural designs have been proposed, of which inclined IRJs are the focus of this paper. To compare noise, vibration, and adjacent sleepers' vertical displacement of square and 30° and 45° cut joints, a series of field tests have been carried... 

Electroencephalogram (EEG) is a noninvasive, low-cost brain recording tool with high temporal but poor spatial resolution. In contrast, functional magnetic resonance imaging (fMRI) is a rather expensive brain recording tool with high spatial and poor temporal resolution. In this study, we aim at recovering the brain activity (source localization and activity-intensity) with high spatial resolution using only EEG recordings. Each EEG electrode records a linear combination of the activities of various parts of the brain. As a result, a multi-electrode EEG recording represents the brain activities via a linear mixing matrix. Due to distance attenuation, this matrix is almost sparse. Using... 

Food choice is one of the most fundamental and most frequent value-based decisions for all animals including humans. However, the neural circuitry involved in food-based decisions is only recently being addressed. Given the relatively fast dynamics of decision formation, electroencephalography (EEG)-informed fMRI analysis is highly beneficial for localizing this circuitry in humans. Here, by using the EEG correlates of evidence accumulation in a simultaneously recorded EEG-fMRI dataset, we found a significant role for the right temporal-parietal operculum (PO) and medial insula including gustatory cortex (GC) in binary choice between food items. These activations were uncovered by using the...