Sharif Digital Repository

Reinforced concrete is one of the most important structural materials used in the construction industry worldwide. Nevertheless, certain physical and chemical factors in the service environment can contribute to its deterioration and failure. One of the most significant factors is the reinforcing steel bar (rebar) corrosion. In order to minimize the rebars corrosion, different kinds of coatings were investigated and evaluated by scientists. In this investigation comparative studies were performed on two different kinds of coated rebars (zinc-rich epoxy and polyamide epoxy coated rebars) and uncoated rebar. In order to evaluate these reinforced concretes, the adhesion, durability, thickness... 

In this thesis, a model is presented to detect and monitor the rotor bar's condition of large motors. This proposed model uses two diagnostic methods MCSA and ZCT, to extract the fault components. The input of the proposed model is only the motor current at two levels of 80% and 100% of the nominal motor load, which by using the two methods MCSA and ZCT and making changes in how to use them can be the disadvantages of other methods such as incorrect detection of rotor bars in Large motors with variable load, the harmonical stator voltage (or the presence of the drives) and asymmetric conditions. The extracted components are classified using two learnable algorithms, the k-NN algorithm and... 

The problem of joint design of transmit code and receive filter is considered in many application scenarios of multiple input multiple output (MIMO) radar systems. The performance of the joint design problem is evaluated with the signal-to-interference ratio (SINR) metric in the presence of noise. In such problems, the optimization problem is to maximize SINR on the receiver side with the constraints that are applied on the transmitted waveform. Our proposed method, RTR, is a manifold-based geometric method that performs better than the SDP method in terms of algorithm execution speed and calculation complexity. For simulation, we took sampled and real TIR with Target Aspect Angle (TAA) in a... 

Sonic and ultrasonic measurements are used for checking status of wells. Well logging is used to estimate well specifications like borehole diameter, casing thickness, cement bond quality and cement sheath thickness. In this thesis, some reported works in field of sonic/ultrasonic measurement of oil wells are reviewed and results of software implementation of ultrasonic measurement with pitch-catch arrangement, pulse-echo arrangement and phased array arrangement are presented. ultrasonic measurement with pitch-catch arrangement uses one transducer for transmitting ultrasonic waves and two transducers (in different distances) for receiving ultrasonic waves. Ultrasonic measurement with... 

Production logging consists of running measurement instruments called logging tools into an oil or gas well to measure various parameters such as temperature, flow velocity, pressure, density, etc. The primary purpose for production logging is to allow enhancing production profits and decreasing costs. Nowadays the common way for fluid density measurement as a part of these tools depends on radioactive source. Special considerations must be taken upon the use of this principle due to its radioactive character. This thesis is focused on a non-radioactive method of determining density. The subject of this thesis is to consider methods for measuring density based on principle of acoustic... 

In the oil industry, a better understanding of the well condition leads to improve the management and increase the oil production. Production logging tools is a set of tools for measuring different parameters such as density, diameter and flow in oil and gas wells. These tools are considered among high-tech tools in the oil industry. The reason is that they should work in harsh conditions, i.e. high temperature about 170 ° C and pressure around 15000 psi, and at the same time give an accurate measurement of the quantity. Current production-logging tools measure the fluid velocity and the diameter of an oil well by individual mechanical tools, and the density by a radioactive densitometer. ... 

Most of the time there are three different materials in oil wells; Oil, water and gas. Measuring volume percentage and flow of the individual materials (phases) is an important issue, due to their critical role in extraction process control. Measuring tool should be able to measure flow and percentage of each phase in a case that they are separated (in deviated wells due to gravity). In addition, the measurement should be carried on in a high temperature and high pressure environment and in presence of corrosive substances. Most of previous researches on Multi-Phase Flow Meter (or MPFM) led to mechanical methods to measure flow and they usually use electrical impedance or permittivity for... 

This study aimed to investigate the efficiency of machine learning algorithms in capturing the dynamics of water particles' age distribution and in estimating the time series of median travel time (MTT) in river basins. The mechanism of solute transport in a catchment does not follow the hydrograph shape of the catchment and depends on the spatial and temporal distribution of solute resident time. The equations governing the age dynamics of water particles discharged from a catchment have been presented analytically in recent research. These equations showed that the transfer of solutes depends on various factors, including climatic conditions, basin topography, and basin vegetation. Also,... 

Photocatalytic degradation is one of the developing modern and effective methods for decontamination of hazardous pollutants of chemical industrial wastewater. In spite of great developments in this field of research and its various advantages, finding a process with high efficiency and optimization of the operating parameters are still required to be investigated. In this study, the photocatalytic degradation of 2-Nitrophenol under natural sunlight irradiation using industrial photocatalysts such as TiO2 (Hombikat), ZnO, WO3 and TiO2 (P25) was investigated. The photocatalysts were characterized by the XRD, BET, SEM and DRS tests and the effects of significant operating parameters (the... 

Nowadays, applications of the synthetic materials are developing in civil engineering projects and widely used in these projects. Therefore, during previous years; use of the Geotextiles as one of the Geosynthetic materials in order to filtration, drainage, separation, soil protection, etc have developed ever-increasing. The goal of this research is modeling and studies of the Geotextiles application in the downstream filter zone of embankment dams in combination with granular materials using FLAC2D software. Gordeh Bin embankment dam situated in West Azerbaijan province has been chosen as case study. In this matter, different models have been made with changes in thickness of the inclined... 

Prediction of groundwater level fluctuations is absolutely necessary for the proper manag ement of these precious resources. There are different methods to predict hydrological time series such as groundwater level. Linear models inefficiency in predicting nonlinear and n on-stationary time series cause researchers widely use artificial intelligence techniques such as Artificial Neural Networks (ANN), Fuzzy Inference System (FIS), Genetic Algorithm (GA) and their hybrid models such as Artificial Neural – Fuzzy Inference System (ANFIS). These smart models are capable to simulate nonlinear and non-stationary time series in suitable accu-racy using by a few time and data. By emersion of Wavelet... 

Entrance of air to close water conduits occurs in many ways. This phenomenon makes displeasing effects on water transport structures. Two-phase flows in closed conduits are studied experimentally, numerically and theoretically. Even after decades, due to the complexity of the subject, these studies still require development and reformation. Numerical and theoretical two-phase models are often limited to a special regime of flow."Volume Of Fluid"(VOF) is a model for non-mixing two-phase flows. "Fluent" software uses this model in this field of flows. Volume of fluid is used successfully in some problems like dam break or rising bubbles. Main disadvantage of this model is distribution of the... 

Groundwater quality protection has a significant importance due to abundant applications of these resources in various fields such as agriculture, industry and drinking water. Removal of groundwater pollution is a time and money consuming process and often pollution is detected when improving the quality of groundwater is nearly impossible. For this vulnerability assessment there are three methods: Processing, Overlap-Index and Statistical Methods. Overlap-Index is composed of variety of maps such as Geology, Soil, Groundwater Depth and etc which uses in determining of vulnerability Index. In the present study for underground pollution potential determining, four indexes such as AVI، GOD،... 

“Sustainable development” is a frequently used phrase, but the idiom has been experienced little since it was coined by the Brundtland, due to its intrinsic complications. The issue is going to compromise two key components; economy and ecology. One of the solutions based on concept of sustainable development that has been proposed for maintaining water quality at acceptable levels is to cap pollutant emissions at a sustainable level, then establish an economic market in which the right to discharge pollutants is traded according to market supply and demand mechanisms. Water quality trading or pollution trading is one such kind of market-based program that has also been described using names... 

Gene expression microarrays can be used for precision medicine and targeted therapies. The data generated by microarrays are high-dimensional causing statistical inference of any parameter a daunting task. In this thesis, it is shown that regardless of high-dimensional datasets produced by microarrays, the inference can be robust in the sense that random selection of features results in the same conclusion as far as the number of selected features are chosen appropriately. Stratifying patients with breast cancer based on their gene expression levels shows that patient subtypes are almost independent of the feature selection strategy. Moreover, using less noisy datasets coming from RNAseq... 

Today, computer simulations are employed prevalently by researchers to understand biological processes. The tendency to use computational methods has been increased recently due to the high costs and errors of experimental methods. Integrins are membrane proteins that mechanically attach cells to the extra cellular matrix (ECM) and derive some behaviors such as cell migration. Moreover, integrins have biochemical functions. They transduce environment signals and trigger chemical pathways. As a result, integrins regulate cell shape, motility, etc. The investigation of integrin behavior in a real environment is very difficult due to the presence of many other proteins that interfere with the...