Sharif Digital Repository

In this research, the effect of surface characteristics on boiling heat transfer has been investigated experimentally. For this purpose, a device with the ability to automatically record the liquid temperature of the inlet and outlet of the test area, calculate the coefficient of boiling heat transfer, and heat flux has been developed. The automatic temperature stability of the working fluid and the ability to investigate the effect of surfaces with different characteristics (in terms of material and surface structure) on the boiling heat transfer parameters are the most important features of this device. The performance of the experimental setup was evaluated by the modified "Chen" equation... 

In this research, the effect of surface characteristics on boiling heat transfer has been investigated experimentally. For this purpose, a device with the ability to automatically record the liquid temperature of the inlet and outlet of the test area, calculate the coefficient of boiling heat transfer, and heat flux has been developed. The automatic temperature stability of the working fluid and the ability to investigate the effect of surfaces with different characteristics (in terms of material and surface structure) on the boiling heat transfer parameters are the most important features of this device. The performance of the experimental setup was evaluated by the modified "Chen" equation... 

The performance of nanoparticles for biomedical applications is often assessed by their narrow size distribution, suitable magnetic saturation and low toxicity effects. In this work, superparamagnetic iron oxide nanoparticles (SPIONs) with different size, shape and saturation magnetization levels were synthesized via a co-precipitation technique using ferrous salts with a Fe3+/Fe2+ mole ratio equal to 2. A parametric study is conducted, based on a uniform design-of-experiments methodology and a critical polymer/iron mass ratio (r-ratio) for obtaining SPION with narrow size distribution, suitable magnetic saturation, and optimum biocompatibility is identified. Polyvinyl alcohol (PVA) has been... 

In recent years, the fabrication of nanoparticles and exploration of their properties have attracted the attention of physicists, chemists, biologists and engineers. Interest in nanoparticles arise from the fact that the mechanical, chemical, electrical, optical, magnetic, electro-optical and magneto-optical properties of these particles are different from their bulk properties and depend on the particle size. There are numerous areas where nanoparticulate systems are of scientific and technological interest. This new book reviews research on the various components of superparamagnetic iron oxide nanoparticles  

As the use of superparamagnetic iron oxide nanoparticles (SPION) in biomedical applications increases (e.g. for targeting drug delivery and imaging), patients are likely to be exposed to products containing SPION. Despite their high biomedical importance, toxicity data for SPION are limited to date. The aim of this study is to investigate the cytotoxicity of SPION and its ability to change cell medium components. Bare and poly(ethylene glycol)-co-fumarate (PEGF)-coated SPION with narrow size distributions were synthesized. The particles were prepared by co-precipitation using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Dulbecco's modified Eagle's medium (DMEM) and primary... 

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC)... 

One of the important challenges in the auto industry is to reduce the mass of the vehicle while meeting structural performance requirements for Crashworthiness, Noise, Vibration and Harshness (NVH) etc. In this paper, a multidisciplinary optimization (MDO) of a car back-bonnet is investigated by using trie Response Surface Method (RSM). Firstly, a car body is fully surface modeled in CATIA and meshed in HYPERMESH software. Then, modal analysis of the finite element model is performed by NASTRAN software to find natural frequencies. Frequency map of that component is extracted and compared with a reference map to detect defects. Design of Experiments (DOE) methodologies is used for a... 

In this article, a novel energy-based lifetime prediction model has been presented for uncoated and coated aluminum alloys, subjected to thermal and mechanical fatigue loadings. For this objective, isothermal and thermo-mechanical fatigue tests were performed on the A356.0 alloy, with and without thermal barrier coating systems. This model, which was based on the plastic strain energy, had three correction factors including temperature, strain and mean stress effects. The predicted lifetime showed a proper agreement with experimental data. By the present model, higher accuracy was obtained in comparison to other existed approaches. Besides, the present model had lower number of material... 

This paper presents a finite element method (FEM) free and forced lateral vibration analysis of beams made of functionally graded materials (FGMs). The temperature dependency of material properties along with damping had not previously been taken into account in vibration analysis. In the present study, the material properties were assumed to be temperature-dependent, and were graded in the thickness direction according to a simple power law distribution of the volume fractions of the constituents. The natural frequencies were obtained for functionally graded (FG) beams with various boundary conditions. First, an FG beam was assumed to be isotropic (metal rich) and the results were compared... 

In this paper, effects of strain rate and mean strain on the cyclic behavior and the lifetime of aluminum-silicon alloys are investigated under thermo-mechanical and isothermal fatigue loadings. To achieve these goals, low cycle fatigue tests are accomplished at evaluated temperatures under various strain rates (by changing the loading frequency) and different strain ratios (minimum to maximum strain). Thermo-mechanical fatigue experiments are performed in an out-of-phase condition where the temperature varies between 50 and 250 °C. Various heating/cooling rates are taken into account to assess the strain rate effect and different starting temperatures are considered to study the mean strain... 

For risk free application of nanoparticles in life science, energy and the environment, it is essential to understand their biological fate and potential toxicity. The application of iron oxide nanoparticles for drug delivery has been one of the most promising researches in the field of nanotechnology. However, there are two major problems associated with magnetically targeted deliveries that still need close attention: • As the drug is coated on to the particle surfaces, there is the possibility of faster drug release (Burst Effect). Therefore, after reaching to the specific site, there is very low amount of drug for delivery. To overcome this problem, some researchers have used conjugation... 

An algorithm for investigation of nonlinear systems by the transfinite element method is presented. Basically, the transformation techniques have been developed for linear systems. Nonlinear transient heat transfer of a thick FGM cylinder with temperature-dependent material properties is investigated in the present paper to clarify the proposed algorithm. Two main novelties of the present research are: (1) incorporating the temperature-dependency of the material properties in the thermal analysis which lead to highly non-linear governing equations and (2) proposing an updating numerical transfinite element procedure to solve the resulted highly nonlinear governing equations. To reduce the... 

In this paper, nonlinear radial and hoop thermoelastic stress analysis of rotating disk made of functionally graded material (FGM) with variable thickness is carried out by using the finite element method. In this method, one-dimensional second order elements with three nodes have been used. The geometrical and boundary conditions are in the shape of nonexistence of the pressure (zero radial stress) in both external and internal layers and zero displacement at the internal layer of rotating disk. Furthermore, it's assumed that heat distribution is as second order curve while material properties such as elasticity modulus, Poisson's ratio and thermal expansion coefficient vary by using a... 

In the present paper, fatigue analysis of an antiroll bar is investigated and compared for several criterions by using the finite element method (FEM) and also the experimental results. The validity of some of commonly used criterions in estimating fatigue life including Mcdiarmid and Von Misses theories is examined in which the inputs are considered as periodic data. For random inputs, some other methods are proposed including new suggestions and also a new criterion are established for estimation of fatigue life based on Mcdiarmid and Von Misses criterions. Prediction capability of mentioned new criterion which is evaluated for the antiroll bar, shows better results than other methods... 

Nonlinear transient heat transfer and thermoelastic stress analyses of a thick-walled FGM cylinder with temperature-dependent materials are performed by using the Hermitian transfinite element method. Temperature-dependency of the material properties has not been taken into account in transient thermoelastic analysis, so far. Due to the mentioned dependency, the resulting governing FEM equations of transient heat transfer are highly nonlinear. Furthermore, in all finite element analysis performed so far in the field, Lagrangian elements have been used. To avoid an artificial local heat source at the mutual boundaries of the elements, Hermitian elements are used instead in the present... 

Spinal fusion surgery is usually followed by accelerated degenerative changes in the unfused segments above and below the treated segment(s), i.e., adjacent segment disease (ASD). While a number of risk factors for ASD have been suggested, its exact pathogenesis remains to be identified. Finite element (FE) models are indispensable tools to investigate mechanical effects of fusion surgeries on post-fusion changes in the adjacent segment kinematics and kinetics. Existing modeling studies validate only their intact FE model against in vitro data and subsequently simulate post-fusion in vivo conditions. The present study provides a novel approach for the comprehensive validation of a lumbar... 

In this research, important parameters of a rack and pinion steering system in dynamic steady state and transient responses have been investigated. For this purpose, virtual model of a medium passenger car in ADAMS/Car has been used. The model has up to 121 kinematic degree of freedom and includes all components of the rack and pinion steering system. Several different experimental test results have confirmed the validity of the model. Sensitivity analysis have been done based on design of experiments (DOE) method. Two level fractional factorial designs have been selected for this purpose. Steady state cornering and step steer input are the analysis that used for this research. Understeering... 

More than 80% of desalination plants use the multi-stage flash (MSF) technology in the Persian Gulf and hence may have a severe irreversible impact on the marine environment. In the present study, geometrical, mixing, and turbulence characteristics of thermal-saline jets, similar to MSF effluents, are numerically investigated using the dynamic Smagorinsky sub-grid scale (SGS) model and UNESCO equation of state. For this purpose, two affecting dimensionless parameters are considered: (1) density ratio, which is thermal flux to salinity flux ratio, and (2) salinity Froude number. Examining the effects of density ratio reveals that the jet flow pattern only depends on the density ratio with a...