Sharif Digital Repository

The compaction forming of metal powder is a process involving large deformations, large strain, non-linear material behavior and friction. Consequently, the numerical analysis of such a highly non-linear process is a formidable computational problem. In this paper, an ALE technique is presented based on a generalized cap plasticity model in simulation of powder forming processes. In ALE formulation, the reference configuration is used for describing the motion, instead of material configuration in Lagrangian, and spatial configuration in Eulerian formulation. This formulation introduces some convective terms in the finite element equations and consists of two phases. Each time step is... 

As computer simulation increasingly supports engineering design, the requirement for a computer software environment providing an integration platform for computational engineering software increases. A key component of an integrated environment is the use of computational engineering to assist and support solutions for complex design. In the present paper, an integrated software environment is demonstrated for multi-disciplinary computational modeling of structural and geotechnical problems. The SUT-DAM is designed in both popularity and functionality with the development of user-friendly pre- and post-processing software. Pre-processing software is used to create the model, generate an... 

In this paper, a three-invariant cap plasticity is developed for description of powder behavior under cold compaction process. The constitutive elasto-plastic matrix and its components are derived as the nonlinear functions of powder relative density. Different aspects of 2D and 3D cap plasticity models are illustrated and the procedure for determination of powder parameters is described. It is shown how the proposed model could generate the elliptical yield surface, double-surface cap plasticity and the irregular hexagonal pyramid of the Mohr-Coulomb and cone-cap yield surface, as special cases. The single-cap plasticity is performed within the framework of large finite element deformation,... 

The principal purpose of tissue engineering is to stimulate the injured or unhealthy tissues to revive their primary function through the simultaneous use of chemical agents, cells, and biocompatible materials. One of the most recently used cellular materials is metallic wood, which possesses the strength of titanium as well as the density of natural materials, such as wood and water. Aside from its density, its cellular structure is also efficient, in which some parts are thick and dense, which hold the structure, and others are porous, which supports biological functions. This material has been predicted to be effective in bone tissue engineering in addition to several industrial... 

In this paper the effects of the first reservoir filling on rockfill dams were studied numerically. To simulate the problem a simplified coupled formulation based on Biot's theory associated with unsaturated soils was presented. The finite element method was applied to the governing equations for the spatial discretization, followed by a generalized Newmark scheme used for the time domain discretization. The three effects of reservoir filling, collapse settlement produced by wetting the rockfill, water load on the dam body and buoyancy in the upstream shell were introduced. The nature of collapse settlement and how to numerically capture that by using the proper constitutive model is... 

In this paper, we apply elliptic second-order differential operators to distance functions. As a result, we extend the mean curvature comparison theorem using lower bounds on the extended Ricci tensor. Then, we extend the Bishop–Gromov volume comparison theorem and some of its consequences on the topology of manifolds. © 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG  

Naturalness in Text-to-Speech (TTS) systems is very important in achieving high quality waveform. The naturalness of the waveform is highly correlated to phonetic coverage and prosodic features such as loudness, duration and pitch. This paper addresses the implementation of a prosodic TTS for Azeri. The TTS system to which the prosodic information is added, is a concatenative synthesizer based on diphones. For adding prosody and increasing naturalness, we have obtained a primary pitch curve for each word, based on the location of the stressed syllable. Also using sentence type effects, the final pitch contour has been modified. As far as we know, the output speech that is produced with this... 

In this paper, a three-invariant cap plasticity with a kinematic hardening rule is presented for powder materials. A general form is developed for the cap plasticity which can be compared with some common double-surface plasticity models proposed for powders in literature. The constitutive elasto-plastic matrix and its components are derived based on the definition of yield surface, hardening parameter and non-linear elastic behavior, as function of relative density of powder. The procedure for determination of powder parameters is described. Finally, the applicability of the proposed model is demonstrated in numerical simulation of triaxial and confining pressure tests. © 2006 Elsevier B.V.... 

In this paper, an application of the reproducing kernel particle method (RKPM) is presented in plasticity behavior of pressure-sensitive material. The RKPM technique is implemented in large deformation analysis of powder compaction process. The RKPM shape function and its derivatives are constructed by imposing the consistency conditions. The essential boundary conditions are enforced by the use of the penalty approach. The support of the RKPM shape function covers the same set of particles during powder compaction, hence no instability is encountered in the large deformation computation. A double-surface plasticity model is developed in numerical simulation of pressure-sensitive material.... 

In this paper, a new computational technique is presented based on the eXtended Finite Element Method (X-FEM) in pressure-sensitive plasticity of powder compaction considering frictional contact. In X-FEM, the need for mesh adaption to discontinuity interface is neglected and the process is accomplished by partitioning the domain with some triangular sub-elements whose Gauss points are used for integration of the domain of the elements. The technique is applied by employing additional functions, which are added to approximate the displacement field of the elements located on the interface. The double-surface cap plasticity model is employed within the X-FEM framework in numerical simulation... 

The mechanical and biological properties of polylactic acid (PLA) need to be further improved in order to be used for bone tissue engineering (BTE). Utilizing a material extrusion technique, three-dimensional (3D) PLA-Ti6Al4V (Ti64) scaffolds with open pores and interconnected channels were successfully fabricated. In spite of the fact that the glass transition temperature of PLA increased with the addition of Ti64, the melting and crystallization temperatures as well as the thermal stability of filaments decreased slightly. However, the addition of 3–6 wt% Ti64 enhanced the mechanical properties of PLA, increasing the ultimate compressive strength and compressive modulus of PLA-3Ti64 to... 

Communication networks with highly mobile users are emerging rapidly. Autonomous vehicular communication is an interesting example of such systems. High mobility speed causes drastic change in channel states, and consequently a doubly selective fading scenario is a proper model for such channels. In this paper, by considering this proper model, we introduce a multiuser system based on orthogonal signal division multiplexing in a cognitive radio scenario. Carrier interferometry codes are also utilized in this system. By designing the transmitter and receiver, the performance of such system is investigated. We show that this system works properly when users are moving rapidly, and moreover the... 

This research focused on fabrication of various carbon nanofibers (CNFs) from electrospun Polyvinyl alcohol (PVA) by utilization of iodine (I2) and cadmium acetate dihydrate (Cd) as stabilizers. Moreover, the influence of carbon nanotube (CNT) incorporation on structure and morphology of CNFs was investigated. In this regard, PVA and PVA-Cd solutions were individually prepared and electrospun. The resulting nanofibers were treated in I2 vapor and then carbonized. In the case of CNT incorporation, oxidized CNTs were first scattered in PVA and PVA-Cd solutions and then electrospun, iodinated and carbonized in the same conditions as mentioned above. It was found that the I2, Cd and their... 

SrFe12-xTix/2Zn x/2O19 (x = 0-2.5) powders were synthesized by use of chlorides through co-precipitation method. The obtained powders were then milled by high energy ball mill to crash hard agglomerates and achieve nanoparticles. In order to evaluate microwave absorption versus frequency, composites including ferrite, as a filler, and matrix of polyvinylchloride (PVC) with weight ratio of 70% ferrite were prepared. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA) were employed to study the structural, magnetic and microwave absorption properties... 

Recycling of wastepaper is an effective way to achieve the sustainable paper manufacturing regarding sustainable development goals. Focusing on the mixed wastepaper sorting, recovery of suitable papers for deinking purpose and minimizing the impurities were developed in this study. In a wastepaper sorting process, each equipment has its own role in increasing recycling performance. In this study, disc screen was applied and evaluated for sorting of the mixed wastepaper considering independent variables such as inclination, velocity and moisture content. Response surface method was applied for design of the experiments. Sorting efficiency of 100% was achieved in two conditions: 1–20%... 

Recycling of wastepaper is an effective way to achieve the sustainable paper manufacturing regarding sustainable development goals. Focusing on the mixed wastepaper sorting, recovery of suitable papers for deinking purpose and minimizing the impurities were developed in this study. In a wastepaper sorting process, each equipment has its own role in increasing recycling performance. In this study, disc screen was applied and evaluated for sorting of the mixed wastepaper considering independent variables such as inclination, velocity and moisture content. Response surface method was applied for design of the experiments. Sorting efficiency of 100% was achieved in two conditions: 1–20%...