Loading...
Search for:
babanezhad-harikandeh--reza
0.13 seconds
Total 2011 records
Criteria Based Framework for Creation of Web-based Application Development Methodologies Using SME
, M.Sc. Thesis Sharif University of Technology ; Ramsin, Raman (Supervisor)
Abstract
Due to the expansion of the Internet, web-based systems have rapidly proliferated. Firms, corporations, supermarket chains and governments provide their services through web-based systems, and there are companies that provide web-based services for other companies. Because of this development and expansion, many web-application development methodologies have been developed, and web-development versions of many renowned methodologies are now available. In order to improve the performance of system engineering teams and increase product quality, it has become necessary to construct or adapt software development methodologies in order to fit the specific project at hand. This method of...
New grafted nanosilica-based sorbent for needle trap extraction of polycyclic aromatic hydrocarbons from water samples followed by GC/MS
, Article Chromatographia ; Volume 74, Issue 5-6 , September , 2011 , Pages 429-436 ; 00095893 (ISSN) ; Roostaie, A ; Babanezhad, E ; Sharif University of Technology
2011
Abstract
In this work, the preparation of a new grafted nanosilica-based sorbent was extensively investigated. An inexpensive modifier, cis-9-octadecenoic acid (oleic acid) was selected to be grafted on the surface of the nanosilica particles as the support. The grafting process was accurately confirmed by Fourier transform infra-red spectrometry (FT-IR). Applicability of the prepared sorbent was thoroughly examined by needle trap extraction (NTE) method. The grafted sorbent was dispersed in the appropriate solvent and carefully packed inside a steel needle. Feasibility of the method was completely examined using polycyclic aromatic hydrocarbons (PAHs), as model compounds. For extraction of analytes...
A sol-gel-based amino functionalized fiber for immersed solid-phase microextraction of organophosphorus pesticides from environmental samples
, Article Microchemical Journal ; Volume 94, Issue 1 , 2010 , Pages 1-6 ; 0026265X (ISSN) ; Ayazi, Z ; Babanezhad, E ; Sharif University of Technology
2010
Abstract
A method based on immersed solid-phase microextraction (SPME) and gas chromatography mass spectrometry detection (GC-MS) for the determination of organophosphorous pesticides (OPPs) in aqueous samples was developed. A sol-gel based coating fiber was prepared using 3-(trimethoxysilylpropyl) amine as precursor. The synthesized fiber was prepared in a way to impart polar moiety into the coating network and would be more suitable for extracting polar and semi-polar organic pollutants. Important parameters influencing the extraction process were optimized and an extraction time of 40 min at 30 °C gave maximum peak area, when NaCl (20% w/v) was added to the aqueous sample. The linearity for...
An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water
, Article Analytica Chimica Acta ; Volume 532, Issue 1 , 2005 , Pages 89-95 ; 00032670 (ISSN) ; Mir, A ; Babanezhad, E ; Sharif University of Technology
2005
Abstract
An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of...
Polymeric Fibers and Sorbents for SPME and In-Needle Device together with GC-MS for Analysis of Environmental Pollutants in Aquatic Media
,
Ph.D. Dissertation
Sharif University of Technology
;
Bagheri, Habib
(Supervisor)
Abstract
Sample preparation gradually becomes a major part of analysis, capable of taking up to 80% of the total time of a complete separation-based analytical process, which typically includes five steps, that is sampling, sample preparation, separation, detection and data analysis. Environmental application is a main cause driving the development of many procedures of sample preparation due to the increased public awareness that environmental contaminants are a health risk. The increased demands in the analysis of foods and natural products have brought another pressure to develop the technologies of sample preparation. The appearance of more sensitive and reliable methodology to monitor...
Process patterns for web engineering
, Article Proceedings - International Computer Software and Applications Conference, 19 July 2010 through 23 July 2020 ; 2010 , Pages 477-486 ; 07303157 (ISSN) ; 9780769540856 (ISBN) ; Bibalan, Y. M ; Ramsin, R ; Sharif University of Technology
2010
Abstract
Web Engineering has been enriched with processes and modeling languages that focus on the specific features of web-based systems, taking into account the special requirements and constraints that are associated with this specific context. Process Patterns, on the other hand, represent elements of knowledge and experience in software engineering; they also act as reusable method chunks that can be used for constructing bespoke methodologies that are tailored to fit specific project situations. We propose a set of process patterns based on current web development practices. A number of prominent web development methodologies have been studied, and a set of process patterns has been elicited...
The essential oil composition of marrubium vulgare l. From Iran
, Article Journal of Essential Oil Research ; Volume 20, Issue 6 , 2008 , Pages 488-490 ; 10412905 (ISSN) ; Saeedi, M ; Babanezhad, E ; Sharif University of Technology
2008
Abstract
The composition of the essential oil obtained from the dried flowering aerial parts of Marrubium vulgare L. (Labiatae) was analyzed by GC and GC/MS. Twenty components have been identified in the essential oil of M. vulgare. The major constituents of the essential oil were β-bisabolene (20.4%), δ-cadinene (19.1%) and isocaryophyllene (14.1%). © 2008, Taylor & Francis Group, LLC. All rights reserved
Membrane protected conductive polymer as micro-SPE device for the determination of triazine herbicides in aquatic media
, Article Journal of Separation Science ; Volume 33, Issue 8 , 2010 , Pages 1132-1138 ; 16159306 (ISSN) ; Khalilian, F ; Naderi, M ; Babanezhad, E ; Sharif University of Technology
2010
Abstract
A micro-SPE technique was developed by fabricating a rather small package including a polypropylene membrane shield containing the appropriate sorbent. The package was used for the extraction of some triazine herbicides from aqueous samples. Solvent desorption was subsequently performed in a microvial and an aliquot of extractant was injected into GC-MS. Various sorbents including aniline-ortho-phenylene diamine copolymer, newly synthesized, polypyrrole, multiwall carbon nanotube, C18 and charcoal were examined as extracting media. Among them, conductive polymers exhibited better performance. Influential parameters including extraction and desorption time, desorption solvent and the ionic...
Hydrocarbon degradation by thermophilic Nocardia otitidiscaviarum strain TSH1: Physiological aspects
, Article Journal of Basic Microbiology ; Volume 47, Issue 6 , December , 2007 , Pages 534-539 ; 0233111X (ISSN) ; Vossoughi, M ; Ardestani, S. K ; Babanezhad, E ; Masoumian, M ; Sharif University of Technology
2007
Abstract
Indigenous thermophilic hydrocarbon degraders are of special significance for the bioremediation of oil-contaminated desert soils with ambient temperature of 45-50°C. The first objective of this study was to demonstrate the hydrocarbon-degrading capability of Nocardia otitidiscaviarum TSH1 (DSM 45036) which grows optimally at 50°C. Analysis of the metabolic profile of the strain TSH1 showed that it could metabolize phenol, intermediate-chain-length n-alkanes and some polycyclic aromatic hydrocarbons (PAHs) ranging in size from two to four fused rings efficiently, but not toluene and xylene. N. otitidiscaviarum TSH1 was able to survive and grow at phenol concentrations up to 875 mg l-1. For...
Modified solvent microextraction with back extraction combined with liquid chromatography-fluorescence detection for the determination of citalopram in human plasma
, Article Analytica Chimica Acta ; Volume 610, Issue 2 , 2008 , Pages 211-216 ; 00032670 (ISSN) ; Khalilian, F ; Babanezhad, E ; Es haghi, A ; Rouini, M. R ; Sharif University of Technology
2008
Abstract
A modified solvent microextraction with back extraction method (SME/BE) combined with high performance liquid chromatography and fluorescence detection (HPLC-FD) was developed for the determination of citalopram in human plasma. Extraction process was performed in a home-made total glass vial without using a teflon ring, usually employed in SME/BE. Citalopram was first extracted from 0.5 mL of plasma, modified with sodium hydroxide, into hexane. Back extraction step was then performed into 5.2 μL of 45 mM ammonium formate solution (pH 4) using a GC microsyringe. The extract was subsequently transferred into a liner-like vial and then injected into the HPLC system. An enrichment factor of 150...
A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]
, Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
Abstract
Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...
Analysis and data-based reconstruction of complex nonlinear dynamical systems : using the methods of stochastic processes
, Book
Springer International Publishing
2019
Abstract
This book focuses on a central question in the field of complex systems: Given a fluctuating (in time or space), uni- or multi-variant sequentially measured set of experimental data (even noisy data), how should one analyse non-parametrically the data, assess underlying trends, uncover characteristics of the fluctuations (including diffusion and jump contributions), and construct a stochastic evolution equation?
Here, the term "non-parametrically" exemplifies that all the functions and parameters of the constructed stochastic evolution equation can be determined directly from the measured data.
The book provides an overview of methods that have been developed for the analysis of...
Here, the term "non-parametrically" exemplifies that all the functions and parameters of the constructed stochastic evolution equation can be determined directly from the measured data.
The book provides an overview of methods that have been developed for the analysis of...
Fabrication and Study of Mechanical Behavior of in Situ Microfibrillar- Reinforced Composites of Polypropylene/Recycled Poly (Ethylene Terephthalate)Toughened with Rubber Particles
, M.Sc. Thesis Sharif University of Technology ; Bagheri, Reza (Supervisor) ; Alizadeh, Reza (Supervisor)
Abstract
The use of polymers is increasing day by day due to low density, reasonable price and ability to produce different products. On the other hand, the accumulation of polymer wastes in nature is one of the environmental concerns in today's world, which is mainly due to the widespread use of polymers in the packaging industry and disposable applications. In order to solve this problem, recycling is recommended as the most appropriate and economical solution. Because in addition to consuming polymer waste, it also saves energy and reduces carbon footprint.Polyethylene terephthalate (PET) is one of the polymeric materials which; It has a special place in the packaging industry and is widely used...
Characterization of Mechanical Properties of Polymer Nanocomposites with Spherical Inhomogeneities
, M.Sc. Thesis Sharif University of Technology ; Naghdabadi, Reza (Supervisor) ; Bagheri, Reza (Supervisor)
Abstract
The improved properties of nanocomposites are not achievable with conventional composites. Scale effect is one the most important parameters in the physical and mechanical properties of polymeric nanocomposites. One of the physical phenomena, which can be related to the scale effect, is the very large interface between the nanoparticles and the polymeric matrices. Motional behavior and conformation of polymeric chains change near the nanoparticles surfaces. Due to high interface of the nanoparticles with the polymeric matrices the amount of these types of changes in the polymeric chains are so large that can change the physical and mechanical properties of polymeric nanocomposites. In this...
On small uniquely vertex-colourable graphs and Xu's conjecture [electronic resource]
, Article Discrete Mathematics ; Volume 223, Issues 1–3, 28 August 2000, Pages 93–108 ; Naserasr, Reza ; Sharif University of Technology
Abstract
Consider the parameter Λ(G) = |E(G)| - |V(G)|(k - 1) + (k2) for a k-chromatic graph G, on the set of vertices V(G) and with the set of edges E(G). It is known that Λ(G)≥0 for any k-chromatic uniquely vertex-colourable graph G (k-UCG), and, S.J. Xu has conjectured that for any k-UCG, G, Λ(G) = 0 implies that cl(G) = k; in which cl(G) is the clique number of G. In this paper, first, we introduce the concept of the core of a k-UCG as an induced subgraph without any colour-class of size one, and without any vertex of degree k - 1. Considering (k, n)-cores as k-UCGs on n vertices, we show that edge-minimal (k, 2k)-cores do not exist when k ≥ 3, which shows that for any edge-minimal k-UCG on 2k...
Molecular Dynamics Simulation of Nano-Diamond Synthesis by Shock Wave
, Ph.D. Dissertation Sharif University of Technology ; Naghdabadi, Reza (Supervisor) ; Movahhedy, Mohammad Reza (Co-Advisor)
Abstract
In the field of high-pressure material science, diverse carbon systems under pressure have been intensively studied with interest in synthesizing new phases. A variety of these synthetic phases which have met various applications in today technology are called the amorphous diamond. The pressure-induced structural transition of carbonaceous material to amorphous diamond is realized by shock compression and rapid quenching. The shock compression and rapid quenching generate the high pressure (several GPa) and the temperature (several hundred K) in a fraction of a microsecond.Since the mechanical and electrical properties of the synthetic diamond are severely sensitive to the atomic structure,...
An Experimental Study of the Effects of Sweep Wing on the Boundary Layer of 2D Wing
, M.Sc. Thesis Sharif University of Technology ; Soltani, Mohammad Reza (Supervisor) ; Davari, Ali Reza (Co-Advisor)
Abstract
The behavior of boundary layer under the effect of the sweep angle is considered. The measurements were performed by a pitot tube rake. Three models with various sweep angels at angles of attack -2, 0 and 2 degree were tested. Both tip and root of all wings were closed by flat plates in order to prevent the flow to roll-up. However the flow field on the wing was still three-dimensional because of the sweep angle. The velocity on the wing has two components; longitudinal and lateral. The cross flow emerges due to the non-equilibrium of pressure and centrifugal forces. The velocity profiles showed that the magnitude of cross flow was stronger near the leading edge of the wing. The cross flow...
Synthesis of Antibiotic-eluting Chitosan-based Composite Coating by Electrophoretic Deposition for Bone Implants
, M.Sc. Thesis Sharif University of Technology ; Simchi, Abdol Reza (Supervisor) ; Bagheri, Reza (Supervisor)
Abstract
Drug-eluting bone implant coatings is a new era that has gained a lot of attention in recent years. In this matter, drug is loaded in the coating and local and targeted release of the drug results in preventing the side effects of implantation and increasing the healing process of the patient. The aim of this project was to synthesis the antibiotic eluting chitosan-based composite using electrophoretic deposition for bone implant coating. By using electrophoretic deposition chitosan and chitosan-bioglass composite coatings were synthesized. Then the probability of loading of drug into coating by using electrophoretic deposition was evaluated and by using this process chitosan and...
Solving High-Dimensional Differential Equations Using Machine Learning
, M.Sc. Thesis Sharif University of Technology ; Razvan, Mohammad Reza (Supervisor) ; Moghadasi, Reza (Co-Supervisor)
Abstract
The numerical solution of differential equations in high dimensions has always been a challenge and has been associated with various computational difficulties. These equations appear naturally in a variety of problems such as financial mathematics, control, and physics, and their optimal solution with high accuracy and speed can open new windows on new applications. Conventional methods such as Finite element and finite difference method in high dimensions lose their efficiency, which is a barrier to fast and accurate calculation of these equations. In this dissertation first, we review some theoretical and practical aspects of deep neural networks and then we try to examine the recent...
Topological Defects in Confined Nematics by Planar Anchoring
, M.Sc. Thesis Sharif University of Technology ; Ejtehadi, Mohammad Reza (Supervisor) ; Mozaffari, Mohammad Reza (Supervisor)
Abstract
Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related...