Sharif Digital Repository

Since the advent of conventional activated sludge biological treatment plants, their low efficiency in nitrogen and phosphorus removal has become a significant concern. Therefore, in this study, the performance of microalgal-activated sludge membrane bioreactor (MAS-MBR) as a self-biological treatment or as a post-treatment for conventional biological treatments was investigated. A continuous MAS-MBR with two ratios of algae/sludge (only microalgae and 5:1) was used to treat raw and treated wastewater. The optimum case was achieved with the cultivation of mixed algae/sludge in raw wastewater (R2 case). In this case, the ammonium and phosphorus removal efficiencies were 94.36 ± 3.5 and 88.37... 

Contraction flow is one of important geometries in fluid flow both in Newtonian and non-Newtonian fluids. In this study, flow of a viscoelastic fluid through a planar 4:1 contraction with rounded corners was investigated. Six different rounding ratios (RR =0, 0.125, 0.25, 0.375, 0.438, 0.475, 0.488) was examined using the linear PTT constitutive equation at creeping flow and isothermal condition. Then the resulting PDE set including continuity, momentum, and PTT constitutive equations were implemented to the OpenFOAM software. The results clearly show vortex deterioration with increasing rounding diameter, so that when rounding corner exceeds a critical value, the vortex disappears... 

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions  

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation  

Free vibration response of a joined shell system including cylindrical and spherical shells is analyzed in this research. It is assumed that the system of joined shell is made from a functionally graded material (FGM). Properties of the shells are assumed to be graded through the thickness. Both shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first-order shear deformation theory of shells is used. The Donnell type of kinematic assumptions is adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton’s principle. The resulting system of equations is... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

The present study investigated a counter-flow cooling tower performance by integrating the Artificial Neural Networks and Intelligent Optimisation Algorithms (ANN-IOAs). For this purpose, two scenarios were evaluated. In the first scenario, inlet air wet-bulb temperature (T aw), inlet air dry bulb temperature (T ad), water to the air mass flow rate ratio (mw /ma), and rotor speed (υ) were the input parameters for the ANNs, while the output temperature (T wo) was the ANNs output. In the second scenario, the same input parameters applied for the first scenario were used as input variables and the tower efficiency (ε) was considered as an output parameter. The well-known IOAs methods, namely,... 

We show that a metal-organic framework (MOF) sustained by a nanosized Ag12 cuboctahedral node can be applied to selectively extract traces of lead(II) ion from environmental water samples. The MOF was characterized by thermogravimetric and differential thermal analysis, scanning electron microscopy, FTIR, and X-ray diffraction. The effects of pH value, flow rates, of type, concentration and volume of the eluent, of break-through volume and potentially interfering ions on the separation and determination of lead were evaluated. Following desorption with EDTA, Pb(II) was quantified by FAAS. The use of the MOF results in excellent analytical figures of merit including an analytical range from 2... 

The present study investigated a counter-flow cooling tower performance by integrating the Artificial Neural Networks and Intelligent Optimisation Algorithms (ANN-IOAs). For this purpose, two scenarios were evaluated. In the first scenario, inlet air wet-bulb temperature (T aw), inlet air dry bulb temperature (T ad), water to the air mass flow rate ratio (mw /ma), and rotor speed (υ) were the input parameters for the ANNs, while the output temperature (T wo) was the ANNs output. In the second scenario, the same input parameters applied for the first scenario were used as input variables and the tower efficiency (ε) was considered as an output parameter. The well-known IOAs methods, namely,... 

In this research, copper matrix composites reinforced with different amounts of titanium carbide particles were produced by mechanical milling and in-situ formation of reinforcements. Morphology and size of milled powders were inspected by scanning electron microscopy (SEM) several times during milling process. Changes in lattice parameter, crystallite size, lattice strain, dislocation density and Gibbs free energy changes (due to increasing in dislocation densities and grain boundaries) in different samples (with different TiC particles contents) were studied by X-Ray Diffraction technique with Cu-kα radiation and using Nelson-Riley method and Williamson-Hall equation. Microstructure of... 

Surface modification of orthopedic implants using titanium dioxide nanotubes and silver nanoparticles (SNs) is a promising approach to prevent bacteria adhesion, biofilm formation, and implant infection. Herein, we utilized a straightforward and all-solution process to prepare silver-decorated TiO2 nanotube arrays with surface density of 10(3) to 10(4) per µm(2). With controlling the synthesis conditions, hexagonal closed-packed nanotubes with opening diameter of 30-100 nm that are decorated with SNs with varying sizes (12-40 nm) were prepared. Various analytical techniques were utilized to characterize the size, morphology, distribution, valance state, surface roughness, and composition of...