Sharif Digital Repository

Free vibration response of a joined shell system including cylindrical and spherical shells is analyzed in this research. It is assumed that the system of joined shell is made from a functionally graded material (FGM). Properties of the shells are assumed to be graded through the thickness. Both shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first-order shear deformation theory of shells is used. The Donnell type of kinematic assumptions is adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton’s principle. The resulting system of equations is... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

A simple, rapid and sensitive method based on microextraction in packed syringe (MEPS), in combination with gas chromatography-mass spectrometry (GC-MS) was developed. Polyaniline (PANI) nanowires network was synthesized and used as sorbent of MEPS for the multiresidue determination of selected analytes from triazine, organochlrorine and organophosphorous pesticides in aqueous samples. The PANI nanowires network was prepared using soft template technique and its characterization was studied by scanning electron microscopy (SEM). The presence of micelles in this methodology showed to be an important parameter in shaping the growing polymer. Hexadecyltrimethylammonium bromide (HTAB) was used... 

The morphology of a quaternary blend containing a diglycidyl ether of bisphenol-A (DGEBA), a thermoplastic modifier (PMMA), a phase-separating curing agent (diaminodiphenylmethane, DDM), and a non-phase-separating curing agent (methylenebis(3-chloro-2,6-diethylaniline, MCDEA) was studied as a function of volume fraction of the thermoplastic modifier and fractional concentration of the curing agents in their mixture. It was found that using mixtures of curing agents a co-continuous morphology could be obtained at PMMA concentrations as low as 2.5 volume percent. Using FTIR spectroscopy it was proved that specific interactions are present between PMMA and individual amine curing agents. On the... 

Surface modification of orthopedic implants using titanium dioxide nanotubes and silver nanoparticles (SNs) is a promising approach to prevent bacteria adhesion, biofilm formation, and implant infection. Herein, we utilized a straightforward and all-solution process to prepare silver-decorated TiO2 nanotube arrays with surface density of 10(3) to 10(4) per µm(2). With controlling the synthesis conditions, hexagonal closed-packed nanotubes with opening diameter of 30-100 nm that are decorated with SNs with varying sizes (12-40 nm) were prepared. Various analytical techniques were utilized to characterize the size, morphology, distribution, valance state, surface roughness, and composition of... 

This study deals with the large-scale production of biosurfactant from soybean oil soapstock by Pseudomonas aeruginosa MR01. The production of biosurfactant was carried out in a newly designed bioreactor equipped with recycling flow under three operational conditions. Kinetic studies were conducted at both shake flask and 5-L bioreactor scales during fermentation in a soapstock medium. Mathematical equations were developed to model the kinetic patterns at both scales. RESULT: Statistical analyses demonstrated the goodness of fit, with regression r-squared, R2, between 0.97and 0.99 for different models. Furthermore, biosurfactant concentration in the bioreactor including the recycling flow,... 

Recent uses of intelligent composites in biomedical appliances aggrandize the necessity of bonding-strength improvement in NiTi/silicone matrix interface. SEM micrographs and pull-out tests are employed to determine the strength of the NiTi/silicone bonds in a flexible composite piece. Greater adhesion strengths are obtained due to the presence of thin oxide layer, surface roughness and frictional forces between the embedded-wires and the contacting phase. Effect of curing treatment on phase transformation temperatures of the wires is determined by electrical resistivity (ER) measurements. Results show that the curing treatment shifts the transition points of the wires towards higher... 

The goal of this paper was to create a new method for analyzing the online real estate flyers based on their property types. We created an algorithm which identifies the buildings and windows from the buildings in order to extract some useful features for classifying the flyers. Our novel approach for building recognition has two main steps: 1- Building Detector 2- Region Growing. Our novel window detection algorithm uses vanishing point to identify nearly the best angle for applying window detection. It transforms the 2D image into 3D and rotates the 3D image around the z-axis and picks the appropriate angle based on the vanishing points. Using these two novel techniques we were be able to... 

Poly(butadiene-stat-styrene)/poly(methylmetacrylate), SBR/PMMA, structural latices were synthesized by using equal moles of different kinds of surfactants: anionic, nonionic, and anionic/nonionic mixture in a two-stage emulsion polymerization. The results indicate that the application of anionic surfactants for the first stage, accompanying sodium persulfate initiator, KPS, for both stages led to core/shell and raspberry morphologies depended upon the hydrophilic lipophilic balance (HLB) of the surfactant. On the other hand, a core/shell structure was observed for structural latices which were synthesized via application of nonionic or anionic/non-ionic mixed surfactants along with... 

A convenient and efficient procedure for electrophilic aromatic bromination has been developed by mixing of N-bromosuccinimide and an aromatic compound at room temperature on the surface of silica gel mixed with solid anhydrous LiClO4. All of the substrates examined underwent clean electrophilic aromatic bromination in reaction times of a few minutes to afford the corresponding bromoarenes under neutral conditions in excellent yield. In the case of thiophenol, no substitution reaction occurred, and the corresponding disulfide was obtained in excellent yield. © 2005 NRC Canada  

This article describes the synthesis and swelling behavior of a superabsorbing hydrogel based on sodium alginate (NaAlg) and polyacrylonitrile (PAN). The physical mixture of NaAlg and PAN was hydrolyzed with a solution of NaOH to yield an alginate-poly(sodium acrylate-co-acrylamide) [Alg-poly(NaAA-co-AAm)] superabsorbent hydrogel. A proposed mechanism for hydrogel formation was suggested, and the structure of the product was established with Fourier transform infrared spectroscopy. The effects of reaction variables were systematically optimized to achieve a hydrogel with a swelling capacity as high as possible. Under the optimized conditions concluded, the maximum capacity of swelling in... 

A high-throughput solid-phase microextraction (SPME) on 96-well plate together with gas chromatography-mass spectrometry (GC-MS) was developed for the determination of some selected pesticides in cucumber samples. Pieces with the length of 1.0cm of silicon tubing were precisely prepared and then coated on the end part of stainless steel wires. The prepared fibers were positioned in a home-made polytetrafluoroethylene (PTFE)-based constructed ninety-six holes block to have the possibility of simultaneous immersion of the SPME fibers into the center of individual wells. Pesticides such as diazinon, penconazol, tebuconazol, bitertanol, malathion, phosalone and chlorpyrifos-methyl were selected... 

A novel method based on microextraction in packed syringe (MEPS) as sample preparation technique coupled off-line with gas chromatography-mass spectrometry was developed using electrospun nanofibers as sorbent. For electrospinning of polypyrrole/polyamide-based nanofiber, a homogeneous solution containing nylon 6, ferric chloride and pyrrole monomer was prepared and then was drawn into a 2.5-mL syringe. By applying a voltage of 13akV between the needle of the syringe and an aluminum-foil collector, the nanofibers could be formed on the surface of the collector. The prepared sheet was used as the sorbent for MEPS to analyze some selected organophosphorous pesticides. Important parameters... 

In Iran, there are more than 15,000. MW of wind power potential, but only about 90. MW have been installed since 2009. Because fuel costs are the main part of fuel-consumed power generation costs and fossil resource costs are highly subsidized in Iran, renewable energies such as wind power have yet to be fully developed. This analysis sets out to evaluate the total generating costs of wind power and conventional power plants in Iran. A levelized cost approach was conducted that included investment costs, O&M costs, fuel costs and external costs of emissions for each type of technology. Comparison of cost assessments of power generation show that by taking into account global fuel prices and... 

Despite the great promise of hybrid solar-wind-biomass energy systems to power future sustainable cities, complexities associated with their optimal planning and design limit their wide-scale implementation. This study provides a novel systematic framework to identify optimal hybrid renewable solutions for urban areas at neighborhood scales. In particular, we examine the role of economies of scale in the techno-economic feasibility and environmental performance of hybrid renewable systems. For demonstration, we assess the impact of the economics of scale (at the neighborhood scales of 1/500, 1/250, and 1/100 of the city's electrical load) on the life-cycle costs of optimal hybrid renewable... 

In a distributed algorithm several processing nodes communicate with each other and incorporate in order to reach a common goal. Each unit has its own locally-observed environment while it can either help or mislead other units when sharing its information. This could be either intentional or simply due to the observation noise. Previous works mainly focus on locating the agents properly and assigning weights based on stationary environment in order to minimize the impact of noisy nodes. We, however, propose a method capable of assigning combination weights in accordance with momentary performance of the neighboring nodes. In order to demonstrate this capability, the proposed algorithm has... 

The thermal decomposition of Aluminum Titanate in exposure to pure Aluminum was examined both in powder and in bulk form. Optical microscopy, FE-SEM, XRD, DSC and TGA examinations were conducted to take the possible chemical reactions between Aluminum Titanate and Al into consideration. It was found that as Aluminum Titanate particles are exposed to Al matrix, the thermal stability of Aluminum Titanate is degraded and its decomposition temperature is reduced from 850°C to 550°C. Also, the chemical reactions between Aluminum Titanate and Al start along the interfaces, and the reaction products, i.e. Al3Ti, Al2O3, TiO2 and O2 gas are left there. A mechanism was suggested to describe the... 

In this study, the prediction of excess molar volume of ionic liquid + solvent binary system is described using modified two-parameter and three-parameter cubic equation of state (CEoS). The studied binary systems are consisted of 41 ionic liquids, 40 solvents and 5293 data point in the wide temperature range (278.15–353.15 K), ionic liquid mole fraction (0.0036–0.9920) and atmospheric pressure i.e. P = 1 bar. At the first step, the volume-translated parameter (c) was obtained based on three linear, distance function and exponential-type temperature-dependent cases and using experimental pure density. After that, and due to easy-to-use of c-parameter, various formula was presented based on... 

A low gel content poly (styrene-ran-butadiene)/poly (methyl methacrylate) (SBR/PMMA) core/shell particles dispersed in a good solvent for the shell was wet spun into a coagulation bath at room temperature. The SEM micrographs of as spun fibers showed various surface topographies and fiber diameters, ranging from 4.2 up to 20 μm depend upon the draw ratio. The osmium tetroxide stained cross-section of fibers observed by transmission electron microscope (TEM), indicated a heterogeneous morphology consisting of dark cores and fairly light shells, which is a result of self-stratification to an overall core/shell morphology in fiber cross-section. The inner core consisted of higher concentration...