Sharif Digital Repository

Free vibration response of a joined shell system including cylindrical and spherical shells is analyzed in this research. It is assumed that the system of joined shell is made from a functionally graded material (FGM). Properties of the shells are assumed to be graded through the thickness. Both shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first-order shear deformation theory of shells is used. The Donnell type of kinematic assumptions is adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton’s principle. The resulting system of equations is... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Free vibration response of a cylindrical shell closed with two hemispherical caps at the ends (hermit capsule) is analysed in this research. It is assumed that the system of joined shell is made from functionally graded materials (FGM). Properties of the shells are assumed to be graded through the thickness. Cylindrical and hemispherical shells are unified in thickness. To capture the effects of through-the-thickness shear deformations and rotary inertias, first order theory of shells is used. Donnell type of kinematic assumptions are adopted to establish the general equations of motion and the associated boundary and continuity conditions with the aid of Hamilton's principle. The resulting... 

Surface modification of orthopedic implants using titanium dioxide nanotubes and silver nanoparticles (SNs) is a promising approach to prevent bacteria adhesion, biofilm formation, and implant infection. Herein, we utilized a straightforward and all-solution process to prepare silver-decorated TiO2 nanotube arrays with surface density of 10(3) to 10(4) per µm(2). With controlling the synthesis conditions, hexagonal closed-packed nanotubes with opening diameter of 30-100 nm that are decorated with SNs with varying sizes (12-40 nm) were prepared. Various analytical techniques were utilized to characterize the size, morphology, distribution, valance state, surface roughness, and composition of... 

Epoxy resins have been used as structural materials since the late 1940s. Despite their desirable properties such as high strength, excellent creep resistance, and good adhesion, they suffer from low fracture energy. Rubber modification as a major toughening approach to overcome the inherent brittleness of epoxy polymers was introduced during the early 1970s. Since then, a large number of investigations have been conducted to elucidate different aspects of rubber-toughened epoxies. The present work is a critical review of the field focusing on the important parameters affecting rubber-toughening. The studies reviewed are classified in five categories including roles of matrix ductility,... 

In this paper, we perform Self-Consistent Field (SCF) energy calculation of Tetragonal B3N3 in the homogenous pressure range of −30 GPa to +160 GPa. Also, we study mechanical and electronic properties of this compound as a potential candidate for a conventional phonon-mediated superconductor with a high transition temperature. To do this, the volume changes of B3N3, and its bulk modulus, due to applying pressure in the range of −30 GPa to +160 GPa are calculated and analyzed. The calculated Bulk modulus of B3N3 at 230 GPa in the relaxed condition indicates the strength of bonds and its low compressibility. We calculated and analyzed the electronic effective mass in both XM and MA directions... 

In this paper the projected gradient method is applied as an effective gradient-based topology optimization algorithm in order to direct energy propagation through the desired region of composites microstructure. Rayleigh Damping model is also used in order to take the effect of internal damping mechanisms into account and thus, to fill in the gap between the designed layouts and those in reality. The success of the proposed algorithm is illustrated through several numerical experiments by revealing a set of various designed optimal layouts besides their corresponding energy distributions  

Two types of conventional rubber modifiers and a series of hollow plastic micro-spheres were employed as toughening agents in a diglycidyl ether of bisphenol A (DGEBA) epoxy in Part I (Bagheri R, Pearson RA. Polymer 1996;37:4529) of this study. It was found that the rubber modifiers with different cavitation resistance and hollow plastic micro-spheres which act as pre-existing microvoids toughen epoxies in the same manner. The current study is composed to further examine the previous results in terms of the role inter-particle distance in rubber/microvoid toughened epoxies. It is shown that the fracture toughness in toughened blends goes through a ductile-to-brittle transition with... 

In this investigation, core-shell rubber particles and organically modified clay were added to an epoxy resin and the changes in mechanical behavior were studied. As expected, the yield strength of the organoclay-filled epoxies increased modestly with increasing clay content and the yield strength of the rubber-modified compounds decreased with rubber content. Interestingly, the compressive yield strength of epoxy resins containing both rubber particles and organoclay (a.k.a. hybrid nanocomposites) was found to be independent on organoclay content (up to 5 phr). The fracture toughness of organoclay-filled epoxies increased modestly with clay content and, as expected, the increases in... 

The aim of this paper is to investigate adhesion property between nano-layered filler and the polymer matrix using a combination of experimental and micromechanical models as well as the changes in yield strength and stiffness of a layered silicate-filled epoxy nanocomposite. The results indicate that addition of intercalated layered silicate particles increased Young's modulus and yield strength of the epoxy resin, although the increases in stiffness and yield strength are modest, 30% and 4%, respectively. In addition, experimental results were compared with predictive stiffening and strengthening models. The rule of mixtures provides an upper bound for the modulus in these materials, while... 

In this study, homo- and co-polypropylene were modified by nanometric calcium carbonate and the effect of additive on scratch resistance was evaluated. Results of this study show that the length of scratch curvature can be considered as an acceptable criterion to evaluate the scratch resistance of polymers. Also, it was found that addition of calcium carbonate to homo-polypropylene increases scratch resistance of this polymer, but its effect on co-polypropylene is insignificant. Based on the results of this work, one may claim that incorporation of nanometric particles with good adhesion to the matrix and well dispersion might be effective in enhancement of scratch resistance. Formation of... 

An architectural modification method was utilized to improve fracture toughness of discontinuously reinforced aluminum (DRA) composites. Al-DRA composites having a structure similar to that of reinforced concrete were fabricated. The number of reinforcing DRA rods within Al matrix and volume fraction of SiC particles in DRA were altered to evaluate their effect on fracture behavior of these materials. It was found that architectural modification does not have any destructive influence on elastic modulus and yield strength of the composite. Moreover, the success of this method on toughness improvement strongly depends on the occurrence of debonding between Al and DRA regions upon loading  

The fracture toughness and deformation mechanism of PP/CaCO3 (15 wt.%) composites were studied and related to load-bearing capacity of the particles. To alter the load-bearing capacity of the particles, different particle sizes (0.07-7 μm) with or without stearic acid coating were incorporated. The fracture toughness of the composites was determined using J-Integral method and the deformation mechanism was studied by transmission optical microscopy of the crack tip damage zone. It was observed that the load-bearing capacity of the particles decreased by reduction of particle size and application of coating. A linear relationship between normalized fracture toughness and inverse of... 

Gelatin-based functional films were prepared by the addition of grapefruit seed extract (GSE, 5 wt% based on gelatin) and various amounts of TiO2 (0.5, 1.0, 3.0, and 5.0 wt% based on gelatin). TiO2 was evenly dispersed in the gelatin film, but the film surface roughness was increased as the concentration of TiO2 increased. The mechanical strength and water contact angle (WCA) of the composite film were the highest, while the water vapor permeability (WVP) was the lowest when 0.5 wt% TiO2 was used. The addition of GSE slightly reduced the UV light transmittance, but the addition of TiO2 almost completely prevented the UV light transmission. The addition of GSE and TiO2 did not significantly... 

A magnetic polyurethane (PU) nanocomposite was synthesized by an electrospinning technique and applied for isolation and preconcentration of fluoxetine from aquatic and biological samples. The nanocomposite was electrospun using a PU polymer solution containing the dispersed magnetic nanoparticles. The magnetic properties of iron nanoparticles, along with the use of an electrospinning technique, led to the formation of a suitable sorbent toward isolation of fluoxetine. The magnetic PU nanofibers could be subsequently removed from the sample solution by applying a permanent magnet. The scanning electron microscopy (SEM) image of the magnetic PU nanofibers confirms that their diameters are in... 

Polypropylene matrix nanocomposites reinforced with organoclay are investigated and their ability to replace some polyamide automotive parts is evaluated. This is so interesting from industrial point of view because of cost saving and ease of processing and recycling. This work is focused on different nanocomposite systems which are PP/nanoclay, and PP/PA/nanoclay. Also the effect of compatibilizer is presented here. Structure of these systems are studied by using WAXD, TEM and SEM. Mechanical properties of specimens are studied using uniaxial tensile test. As it will be demonstrated, nanoclay sheets tend to disperse in PA particles. On the other hand, introducing nanoclay into PP/PA blends... 

A novel Fe3O4-poly(aniline-naphthylamine)-based nanocomposite was synthesized by chemical oxidative polymerization process as a magnetic sorbent for micro solid phase extraction. The scanning electron microscopy images of the synthesized nanocomposite revealed that the copolymer posses a porous structure with diameters less than 50nm. The extraction efficiency of this sorbent was examined by isolation of rhodamine B, a mutagenic and carcinogenic dye, from aquatic media in dispersion mode. Among different synthesized polymers, Fe3O4/poly(aniline-naphthylamine) nanocomposite showed a prominent efficiency. Parameters including the desorption solvent, amount of sorbent, desorption time, sample... 

Binary blends of recycled high-density polyethylene (R-HDPE) with poly(ethylene terephthalate) (R-PET) and recycled polystyrene (R-PS), as well as the ternary blends, i.e. R-HDPE/R-PET/R-PS, with varying amounts of the constituents were prepared by twin screw extruder. The mechanical, rheological, thermal, and scanning electron microscopy (SEM) analyses were utilized to characterize the samples. The results revealed that both R-HDPE/R-PET and R-HDPE/R-PS blends show phase inversion but at different compositions. The R-PET was found to have much higher influence on the properties enhancement of the R-HDPE compared to R-PS, but at the phase inverted situation, a significant loss in the tensile... 

Thermally oxidized nanodiamond (OND), amine-functionalized ND (AND) and untreated ND (UND) were added to epoxy/TETA at 1 wt % loading. The ND enhanced the dynamic storage modulus of epoxy while decreasing the glass transition temperature because of the increment of free volume in the vicinity of the ND surfaces. The ND induced an acceleration effect on the curing reaction which could be due to functional groups of the ND and lack of any steric hindrance on molecules by the ND particles themselves. The Vyazovkin model-free isoconversional method indicated that all NDs decreased the activation energy; among them, AND showed the lowest value because of the significant promotion of the epoxide...