Sharif Digital Repository

Various methods using different measures have been proposed for ontology alignment. Therefore, it is necessary to evaluate the effectiveness of such measures to select better ones for more quality alignment. Current approaches for comparing these measures, are highly dependent on alignment frameworks, which may cause unreal results. In this paper, we propose a framework independent evaluation method, and discuss results of applying it to famous existing string measures. © Springer-Verlag Berlin Heidelberg 2006  

The mechanism of gold nanowire (AuNW) and nanotube (AuNT) electrodeposition in a cyanide-free solution is investigated for the first time based on the analytical model of Szabo et al. (A. Szabo et al., J. Electroanal. Chem. 217 (1987) 417) for recessed cylindrical ultramicroelectrode (UME). Track-etched Polycarbonate Template (PCT) is served as cylindrical UME ensemble/arrays. Firstly, Au is nucleated through a charge transfer step and when the Nernst thickness exceeds the pore length, the radial diffusion is established around pore mouths. By overlapping of these domains, the planar diffusion toward the whole PCT surface is obtained. An analytic expression for global diffusion coefficient... 

Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil-polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane-GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell... 

Ontology matching is a process for selection of a good alignment across entities of two (or more) ontologies. This can be viewed as a two-phase process of (1) applying a similarity measure to find the correspondence of each pair of entities from two ontologies, and (2) extraction of an optimal or near optimal mapping. This paper is focused on the second phase and introduces our evolutionary approach for that. To be able to do so, we need a mechanism to score different possible mappings. Our solution is a weighting mechanism named coincidence-based weighting. A genetic algorithm is then introduced to create better mappings in successive iterations. We will explain how we code a mapping as... 

Several metrics have been proposed for recognition of relationships between elements of two Ontologies. Many of these methods select a number of such metrics and combine them to extract existing mappings. In this article, we present a method for selection of more effective metrics - based on data mining techniques. Furthermore, by having a set of metrics, we suggest a data-mining-like means for combining them into a better ontology alignment  

This study attempts to find an optimum combination of the welding tool rotation rate (ω) and traveling speed (υ), concerning the corrosion and mechanical properties of Friction Stir Welded (FSWed) AA5052 Aluminum alloy. The effect of the tool speeds on the FSWed AA5052 are investigated via potentiodynamic polarization, open circuit potential (OCP) monitoring, test of the susceptibility to intergranular corrosion, weight loss, tension and micro-hardness tests. Optical microscope and Scanning Electron Microscopy (SEM) were employed for studying the morphology and analyzing the probable intergranular attacks. It was found that by increasing υ up to 200. mm/min at ω=400 rpm, the microstructural... 

Predicting latency between nodes on the internet can have a significant impact on the performance of many services that use latency distances among nodes as a decision making input. Coordinate-based approaches are among the family of latency prediction techniques where latency between each pair of nodes is modeled as the virtual distance among those nodes over a virtual system. This article proposes the Decentralized Coordinate System (DCS) as a fully distributed system that does not rely on any infrastructure support from the underlying network. DCS uses a two-phase algorithm: first, each host is assigned rough coordinates, then, the rough estimation is refined in a way that it gradually... 

A novel active queue management (AQM) method is proposed. This method, named NN-RED, is based on the use of a neural network for early congestion prediction. By simulations, it is demonstrated that the performance of the proposed approach is better than the random early detection (RED) method that is currently known as one of the best AQM methods in solving congestion problems. © The Institution of Engineering and Technology 2007  

In this study, a detector/estimator is proposed for compressed sensing radars, which does not need to reconstruct the radar signal, and which works directly from compressive measurements. More precisely, through direct processing of the measurements, and without the need for reconstructing the original radar signal, the system performs target detection, and then estimates range, Doppler frequency shift and radar cross section in the presence of a Gaussian clutter. It can be seen that for large compression ratios, the detection performance and estimation quality is comparable with a common radar system while having a much lower data rate and with less computational load  

The main motivation behind compressive sensing is to reduce the sampling rate at the input of a digital signal processing system. However, if for processing the sensed signal one requires to reconstruct the corresponding Nyquist samples, then the data rate will be again high in the processing stages of the overall system. Therefore, it is preferred that the desired processing task is done directly on the compressive measurements, without the need for the reconstruction of the Nyquist samples. This paper addresses the case in which the processing task is “detection” (the existence) of a sparse signal in additive white Gaussian noise, with applications e.g. in radar systems. Moreover, we will... 

Resilient Packet Ring (RPR) that has been standardized as IEEE 802.17 is a MAC layer protocol designed for data centric metropolitan area network applications. A well-designed RPR network would be able to offer QoS guarantee for throughput and delay sensitive data classes in addition to providing other types of low cost best effort services. Careful network planning would be required to allow successful provisioning of classA services with strict delay and jitter requirements over RPR networks. This would require the knowledge of the dependency of delay and jitter for classA traffic on the load that is added to the ring. In this article, we propose an algorithm to estimate the dependency of... 

predicting the latency between hosts in the internet can play a significant rolein the improvement of the performance of many services that use latency distances among hosts as a decision making input. Although, the information regarding the point to point delay among internet peers is required in many applications, such information is not easily available to the peers. Latency data acquisition requires a considerableamount of measurements to be performed at each node in order for that node to keep a recordof its latency to all the other nodes. Moreover, the measurements need to be regularly repeated in order to be updatedagainst the network dynamics where the latency values are frequently... 

Massively Multiuser Virtual Environment (MMVE) applications have the challenge of update message exchange among a large number of users. Real-time collaboration in the virtual environments requires the updates to be exchanged with the minimum end-to-end latency and overhead. This article proposes a new clustering technique to improve the update message exchange efficiency in MMVE applications. The proposed solution is based on the use of ant clustering technique in order to cluster the users based on their geographical proximity. These clusters can be used as localized routing regions in the hierarchical routing architecture and prevent local messages to be routed through long distance hops.... 

In this study, we have investigated the use of electrodeposited Au-Pt nanoparticles (AuPtNPs) on indium tin oxide (ITO) for the detection of Hg2+ heavy ions in water samples. The mechanism of AuPtNP electrocrystallization on ITO glass in an aqueous solution containing 0.5 mM HAuCl4 + 0.5 mM H2PtCl6 is described for the first time. The nucleation mechanism of monometallic AuNPs on ITO was found to be progressive; however, a transition from progressive to instantaneous was observed for bimetallic AuPtNPs at elevated overpotentials. The modified ITOs were then assessed for the electrodetection of Hg2+ in aqueous media. It was shown by differential pulse voltammetry (DPV) that the sensitivity of... 

In this paper we will propose a novel distributed architecture for overlay tree construction in collaborative virtual environments that is unlimitedly scalable due to its fully decentralized nature. The routing issue over this architecture will later be discussed and several forwarding schemes based on distributed hash tables (DHT) will be proposed. One of the main concerns for a routing algorithm is to keep a trade-off between the algorithm locality and the algorithm performance. In a global algorithm where nodes make the forwarding decision based on the information gathered from all other nodes in the network, the routing performance may obviously be better. However such a large group... 

Although collaborative distributed simulations and virtual environments (VE) have been an active area of research in the past few years, they have recently gained even more attention due to the emergence of online gaming, emergency simulation and planning systems, and disaster management applications. Such environments combine graphics, haptics, animations and networking to create interactive multimodal worlds that allows participants to collaborate in real-time. Massively Multiplayer Online Gaming (MMOG), perhaps the most widely deployed practical application of distributed virtual environments, allows players to act together concurrently in a virtual world over the Internet. IP...