Sharif Digital Repository

Following the approach of the induced-matter theory, we investigate the cosmological implications of a five-dimensional Brans-Dicke (BD) theory, and propose to explain the acceleration of the universe. After inducing in a four-dimensional hypersurface, we classify the energy-momentum tensor into two parts in a way that, one part represents all kind of the matter (the baryonic and dark) and the other one contains every extra terms emerging from the scale factor of the fifth dimension and the scalar field, which we consider as the energy-momentum tensor of dark energy. We also separate the energy-momentum conservation equation into two conservation equations, one for matter and the other for... 

The energetics and kinetic energy barriers of vacancy/atom exchange in a 37-atom truncated octahedron Ag-Pt binary cluster in the Ag-rich range of compositions are investigated via a first-principles atomistic approach. The energy of the local minima obtained considering various distributions of a single vacancy and a few Pt atoms within the cluster and the energy barriers connecting them are evaluated using accurate density-functional calculations. The effects of the simultaneous presence of a vacancy and Pt atoms are found to be simply additive when their distances are larger than first-neighbors, whereas when they can be stabilizing at low Pt content due to the release of strain by the... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Used lubricating oil (ULO) is a heavy mixture of various hydrocarbons and needs to be treated before discharging. Considering ULO nature, it is more favorable to recover lighter hydrocarbon cuts from ULO, which not only improves the whole process economically, but also prevents the emission of hardly decomposable hydrocarbons into the environment. In this research, the potential of pyrolysis method for ULO recovery was studied. Furthermore, graphene nanoplatelets (GNP), γ- Fe2O3 and ZnO nanoparticles were used to improve the kinetics of the process and their impacts on the final product quality were evaluated. Based on the results, adding nanomaterials increased the tendency to produce gas... 

The applications of Nomex honeycomb composite (NHC) structures in aerospace, automotive and defence sectors have been significantly increasing due to their high compressive strength, hexagonal thin-walled structure, ultra-light weight and excellent thermal resistance. Specific applications include composite sandwich structures in helicopter propellers, satellite cabins, aeroplane floors, engine cowls, wings and nacelles. Accuracy of the machined surface of NHC structures is required for adhesive bonding with face-sheets. Conventional machining processes generate machining defects in terms of tearing, damaged cell walls, burr formation, delamination and poor surface quality that result in... 

A robotic system was designed and developed to perform the camera handling task during laparoscopic surgery. The system employs an effective low cost mechanism, with a minimum number of actuated DOFs, enabling spherical movement around a remote centre of motion positioned at the the insertion point of the laparoscopic stem. Kinematic analysis showed a high manipulability measure for the system, with the left/right movements directly governed by rotation of the first rotary actuator, and zoom and up/down movements by the simultaneous motions of the linear and second rotary actuators. A prototype of the robot was developed for practical use in an operating room environment. Hands-free operator... 

Image based registration of rigid objects has been frequently addressed in the literature to obtain an object's motion parameters. In this paper, a new approach of joint segmentation-rigid registration, within the variational framework of the phase field approximation of the Mumford-Shah's functional, is proposed. The defined functional consists of two Mumford-Shah equations, extracting the discontinuity set of the reference and target images due to a rigid spatial transformation. Multiscale minimization of the proposed functional after finite element discretization provided a sub-pixel, robust algorithm for edge extraction as well as edge based rigid registration. The implementation... 

Dog rose (Rosa canina L.) fruit in different stages of proposed was used as a source of ascorbic acid. Two sample preparation methods for extracting ascorbic acid in dog rose fruit were evaluated. These methods used high performance of liquid chromatography (HPLC) for detecting of ascorbic acid, but differed in the preparation of sample (freezing and mild-temperature-drying procedure). Under optimized conditions, the freezing procedure demonstrated better results. The method was used to compare the amount of ascorbic acid in fully ripe, half-ripe and unripe dog rose samples. The results show that dog rose has the highest amount of ascorbic acid in its fully ripe maturity stage. In addition,... 

In this study, the influence of CO2 and CH4 on the performance and selectivity of Co-Ru/Al2O3 catalyst is investigated by injection of these gases (0-20 vol.% of feed) to the feed stream. The effect of temperature and feed flow rate are also inspected. The results show that low amounts of CO2 in the feed stream do not change the catalyst activity, but increasing the amount of CO2 (more than 10 vol.%), causes the CO conversion to decrease and the selectivity of heavy components to increase. Methane acts as an inert gas and does not affect the catalyst performance. Increasing feed flow rate has a negative effect on both CO conversion and heavy component selectivity. By raising the temperature,... 

Aluminum matrix nanocomposites were fabricated by friction stir processing of Al–Mg alloy sheets with pre-placed TiO2 nanoparticles at a concentration of 2 to 6 vol%. Microstructural studies showed that solid state reactions between the metal matrix and TiO2 particles caused in situ formation of MgO and Al3Ti nanophases with an average size ~50 nm. These nanophases were homogenously distributed in an ultra-fine grain structure (0.2–2 µm) of the base metal. The results of pole figures evaluation obtained by electron back scattered diffraction studies revealed that the random orientation of initial annealed sheet was changed to components near to shear and silver texture in the friction stir... 

Electric arc welding is a routine operation in the construction of metallic structures, but the fumes generated during the welding process can threaten the health of welders. Fumes are undesirable products of the majority of welding operations and may have various detrimental effects on health. The purpose of this study was to investigate the effect of operational parameters of the shielded metal arc welding SMAW process on the emission of fumes. A dust monitor was used to measure the number and mass concentration of fumes generated by SMAW. Measurements were made at the distances of 23 cm hood inlet and 41 cm welder’s breathing zone from the weld point, with different values assigned to... 

In this study, both CuO nanoparticles and ZnO nanorods were anchored on thermally-exfoliated g-C3N4 nanosheets (denoted as CZ@T-GCN) via isoelectric point-mediated annealing process as a novel nano-photocatalyst towards degradation of amoxicillin (AMOX). The features of prepared materials were characterized using BET, UV–vis DRS, XRD, FT-IR, XPS, FE-SEM, TEM, EIS and transient photocurrent techniques. These analyses demonstrated the successful formation of heterojunctions between components of CZ@T-GCN nanocomposite, which reflected in significantly increased electron-hole separation and enhanced degradation of AMOX as compared with pure substances. The investigation of influential operative... 

Cuprous oxide powder was added to WO3 sol as a catalyst and the composite sol was deposited on alumina substrates by spin coating process and annealing at 500 °C for 1 hour. Sensing properties of the pure and doped tungsten oxide samples to H2S gas were analyzed. WO 3-Cu2O (1%) samples showed good sensitivity towards 250 ppb of the gas at 100 °C and 1 ppm at room temperature (25 °C). Crystal structure, morphology and chemical composition of the sample were studied by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDAX) analyses and X-ray photoelectron spectroscopy (XPS). Based on these data, possible reaction mechanisms of hydrogen sulfide over WO... 

A three-phase dual active bridge (DAB) converter is designed and constructed as the DC/DC stage of a 50 kW fast charger station. Recently introduced 300A SiC power modules and drivers are utilized in the converter to obtain a high efficiency. Each module has two interconnected switches with anti-parallel diodes resembling a converter leg. It is observed that the driver halts the module operation as a result of protective actions such as over-current, gate under-voltage, or gate overvoltage. In such case the module operates as a leg with two diodes until an external hardware signal resets the driver. The aim of this paper is to provide analysis, simulation and experiments for a three-phase... 

In this article, indium doped ZnO nanoparticles (alloy nanoparticles) were investigated as inhibitors against algae growth on adobe mud and earthen artworks for surface preservation from destruction caused by micro-organisms under humid conditions, through surface modification and activation run off. Nanoparticles (NPs) were fabricated by physical vapor deposition (PVD) growth mechanism. The fabricated NPs were approximately 20 nm in size. The Chlorella vulgaris and Scenedesmus quadricauda were tested by application of indium doped ZnO nanoparticles (In/ZnO NPs) as inhibitors. As concentrations of NPs increased, the negative impacts of NPs on the algal growth were enhanced and physical... 

5G networks are going to support a variety of vertical services, with a diverse set of key performance indicators (KPIs), by using enabling technologies such as software-defined networking and network function virtualization. It is the responsibility of the network operator to efficiently allocate the available resources to the service requests in such a way to honor KPI requirements, while accounting for the limited quantity of available resources and their cost. A critical challenge is that requests may be highly varying over time, requiring a solution that accounts for their dynamic generation and termination. With this motivation, we seek to make joint decisions for request admission,... 

Magneto-rheological (MR) fluids consist of magnetic particles in carrying fluid. One of the drawbacks in using MR dampers in laboratory work is their price. At present, there is a compelling need for the production of the laboratory scale of MR fluids to lower their production cost. In this study, to show that the MR fluid is an applicable prototyped laboratory scale of single ended and mono-tube, MR dampers with a prototyped MR fluid are presented. The main features of produced MR fluid and dampers are simplifying in constructing and their low cost. These dampers are useful for laboratory research work. To illustrate the validity of the MR fluids, using this fluid, four MR dampers are made... 

Fluid flow behavior in a porous medium is a function of the geometry and topology of its pore space. The construction of a three dimensional pore space model of a porous medium is therefore an important first step in characterizing the medium and predicting its flow properties. A stochastic technique for reconstruction of the 3D pore structure of unstructured random porous media from a 2D thin section training image is presented. The proposed technique relies on successive 2D multiple point statistics simulations coupled to a multi-scale conditioning data extraction procedure. The Single Normal Equation Simulation Algorithm (SNESIM), originally developed as a tool for reproduction of... 

Regarding the dynamic nature of cognitive radio networks and the delay of the central decision algorithms due to collecting necessary information in a multi-hop wireless network, distributed resource allocation algorithms are of crucial importance. In this paper we propose a new distributed resource allocation algorithm that properly selects link/frequency in a multi-hop cognitive radio network for delay sensitive applications. This algorithm, uses the locally collected information from neighboring nodes to make suitable routing decisions regarding the dynamic environment and the behavior of the neighbors. We consider the delay as the routing criterion, consisting the queueing delay and the...