Sharif Digital Repository

In this research, we consider the application of copulas in multivariate quality control problems. In particular, we consider two specific problems. The first problem concerns the situation where the normality assumption is rejected. In this case, copulas can be used as a flexible tool to define a broad range of multivariate distributions with different dependence structure as well as marginal distributions. The second problem concerns proposing control charts to monitor the dependence structure among quality characteristics. The proposed method not only produces an out-of-control signal when dependence structure among variables deviates from the specified one, but also can be used to... 

Impedance spectroscopy is known as one of the important integrated sensing methods in micro scale Biosensors and electrochemical sensors. Recently, Impedance spectroscopy has been noticed in many micro scale applications. These micro scale applications is being developed specially in bioelectronics and biomedical. The goal of this thesis is designing an on-chip impedance spectroscope system for high frequency with 10 bits resolution via fully electrical blood glucose concentration measurement. This system extracts the blood glucose concentration data through measuring the permittivity coefficient of blood at 1 GHz frequency. In this thesis, new method for high frequency high resolution... 

Institution covers wide range of rules, laws and policies. Two bodies of literature around institutions and resource curse have evaluated institutional quality by limited indices. In addition, although different institutions have different effects on economy, the literature hasn’t classified different kinds of institution. Furthermore, resources can affect institutions in different ways. This research has been surveyed the impact of resource dependence on institutional quality. Institutions that regulate relation between governors and citizens were named governmental institutions. Institutions that regulate the relation of citizens were named nongovernmental institutions. Governmental... 

In this study, using Reddy's layer-wise theory, thermal and rotational inter-laminar stress distribution within cylindrical composite shells with different boundary conditions is analytically studied. Convergence of the layer-wise theory is also studied and the numbers of sub-layers are determined so that efficient and accurate results can be achieved by this method. In order to assess the validity of layer-wise theory, results of this method are compared with results obtained by elasticity theory, for two sets of boundary conditions. It is observed that depending on the shell layer stacking, loading and boundary condition type, each of inter-laminar stresses may be the critical stress... 

For studying the hygrothermal deformation of generally laminated composite platesunder uniform temperature change and uniform moisture absorption change, by starting from the reduced form of elasticity displacement field for a long flat laminate, an analytical method is developed in order to accurately calculate the interlaminar stresses near the free edges of the laminate. The constant parameters appearing in the reduced displacement field, describe the global deformation of the laminate and appropriately obtained by employing an improved first-order shear deformation theory.For solving the coupled equilibrium equations of agenerally laminated composite plate, some of the stiffness... 

Nonlinear forced vibrations of thin functionally graded circular and elliptical plates under classical boundary conditions are investigated based on the classical plate theory. The von Kármán strain-displacement relations is employed to include geometrical nonlinearity caused by large transverse displacements of the plate thickness order, and modal expansion in polar and elliptical coordinate along with the perturbation method of multiple scale is used to solve the governing equations. The material properties are graded through the plate thickness according to a power-law distribution of the volume fraction of the constituents. Transverse forcing is supposed to be harmonic with angular... 

The purpose of this research is to provide an analytical solution using first order shear deformation theory for nonlinear bending of rectangular FG plate under mechanical and thermal loads with different boundary conditions. To achieve this goal, extended Kantorovich method have been used. This method has a high convergence rate and is more accurate than other approximate methods, such as the Ritz and Galerkin methods, because the partially differential equations are converted to ordinary differential equations. In order to solving nonlinear odes the perturbation method is used. Material of the plate is a mixture of ceramic and metal and is modeled as an isotropic and non-homogeneous... 

Reactive crystallization or precipitation is an important industrial process. Many chemicals and biochemicals such as catalysts and pigments are produced by precipitation. Because of the advantages of impinging jets in chemical engineering processes, the main aim of this research was to investigate the application of this method in precipitation and to study the effects of different operating and design parameters on the product’s quality and properties. Two chemical models of barium sulfate and copper oxalate were used as main products. Each of these chemicals was produced by a liquid-liquid reaction of two aqueous solutions, which were fed to an impinging-jets reactor. Effects of... 

In this work the transesterification reaction of waste cooking oil in the present of solid catalyst as a type of solid-liquid catalytic reaction, has been studied. For this purpose, two types of alkali solid catalysts were synthesized. CaO-ZrO2 and KOH/γ-Al2O3 catalysts were prepared by co-precipitation and impregnation method, respectively. These catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray fluorescence (XRF), BET surface area, and temperature programmed desorption of CO2 (TPD-CO2). The obtained results for the CaO-ZrO2 catalysts indicate that with increasing Ca/Zr atomic ratio, the activity of catalysts increases, but the stability... 

In the present research an analytical solution is studied for interlaminar stresses in boundary layer region of symmetric composite laminates under torsion. Based on geometrical and physical grounds the existing displacement field in literature is simplified in order to accommodate to torsion of symmetric laminates. Displacement field is divided to global and local parts. The solution procedure consists of combined equivalent single layer theories and layerwise theory of Reddy. ESL theories are more computationally economic while LWTs are considerably accurate in determining local behavior of plate. Further, based on second order shaer deformation theory and Ritz approximate variational... 

Tapered-in fluidized beds, have unique dynamic characteristics compared to cylindrical fluidized beds, because of the velocity gradient in the axial direction. Therefore in the recent years, tapered fluidized beds were widely used in various processes such as biochemical reactions, biological, crystallization, gasification, liquefaction, etc. In this study, a two-dimensional gas-solid model using Eulerian-Eulerian approach along with the kinetic theory of granular solid in a tapered-in fluidized bed was applied. Moreover, the tapered-in fluidized beds were compared with the tapered-out fluidized beds and cylindrical fluidized beds in order to investigate the hydrodynamic behavior of the... 

HCCI engines have lower NOX and PM emissions and higher thermal efficiency compared to spark ignition engines. But these engines have some deficiencies which up to now have prevented their widespread employment. These engines have not been very successful at high loads and speeds and in these conditions normally produce high pollution and noise. In order to solve this problem the present research proposes to equip the HCCI engines with fuel injection system so that at low loads and speeds operate at HCCI engine mode and at loads and speeds higher than pre-set limits, use the fuel injection system in order to operate at a combined HCCI and compression ignition engine mode and provide a... 

Many studies on hybrid vehicles have been done in the past few years. The Full hybrid vehicles need a large number of batteries creating up to 300V to meet the required voltage of electric motor. The size and weight of the batteries cause some problems. This research investigates the mild hybrid vehicle. This vehicle includes a small electric motor and a high power internal combustion engine. In most cases the car’s driving force is created by internal combustion part. A small electric motor, which can operate as engine starter, generator and traction motor, is located between the engine and automatically shifted multi-gear transmission (gearbox). The clutch is used to disconnect the gearbox... 

Xylene isomers have similar boiling points and, therefore, their separation by conventional distillation is not practical. The industrial separation of these isomers is generally performed by adsorption or crystallization processes, which are very energy consuming. In this work, the various methods of the separation of these isomers have been reviewed and the equilibrium adsorption of these components in liquid phase using two commercial types of zeolite including Z-700 and Na-BETA as adsorbent at 15, 25, and 35 oC and an initial concentration range of up to 50 wt% as well as in single and binary solutions was investigated. It was found that Z-700 adsorbent has no selectivity for the binary... 

Some researches have been carried out in the last 20 years in order to increase the present IC engines thermal efficiency and their optimum performance. (HCCI) engine is viewed as a combination of spark-ignition (SI) and compression-ignition (CI) engines. This is because HCCI engines use premixed fuel/air mixture like SI engines and have auto ignition combustion after the mixture is compressed like CI engines. Control of combustion and ignition timing are the main challenges of these engines. Ignition delay, compression ratio, fuel air equivalence ratio and intake temperature and pressure are considered to be the most effective parameters on HCCI combustion.HCCI engines have great potentials...