Loading...
Search for: banaei--mohammad
0.13 seconds

    Design & Fabrication of Regenerative Frequency Divider in Millimeter Wave Band

    , M.Sc. Thesis Sharif University of Technology Rezaei, Mohammad Reza (Author) ; Banaei, Ali (Supervisor)
    Abstract
    The frequency divider is one of the components of a frequency synthesizer. Regenerative frequency divider is one of the frequency division methods and is used in narrow band applications. In this thesis, the process of designing & fabricating Ka band and Ku band regenerative frequency dividers is reported. A bandwidth of 550MHz for the Ka band divider and 400MHz for the Ku band divider have been achieved. Multiple passive structures such as microstrip filters, Wilkinson power dividers and a waveguide-to-microstrip transition have been designed during the fabrication of the mentioned frequency dividers. According to the results of the simulations, the bandwidth of the waveguide-to-microstrip... 

    Design and Implementation of Wearable Sensor for Cardiac Arrhythmia Detection

    , M.Sc. Thesis Sharif University of Technology Banaei Kashani, Amir Ali (Author) ; Fakharzadeh Jahromi, Mohammad (Supervisor)
    Abstract
    Today, by emerging wearable technologies and digital health, it is possible to constantly monitor vital signals of people without time-consuming and costly referrals to medical centers. Applications of wearable sensors for health monitoring include electrocardiograms (ECG), blood pressure measurement, and blood sugar measurement, etc. One of the important fields of health monitoring is cardiac arrhythmia detection. Cardiac arrhythmia is any kind of anomalies in heart beat rhythm that can lead to serious damage to vital organs of the body. It is estimated that between 750 thousand to 1.5 million people are facing cardiac arrhythmia in Iran. Therefore, early detection of cardiac arrhythmia is... 

    Graphene Effect on the Rheological Behaviour of Drilling Fluid

    , M.Sc. Thesis Sharif University of Technology Banaei, Mohammad Hossein (Author) ; Ramezani Saadat, Ahmad (Supervisor) ; Jamshidi, Saeed (Supervisor)
    Abstract
    Since the early 90s, nanotechnology has contributed to several developments in a wide range of Science and industry such as medicine, Physics, Chemistry, Aerospace, electronics and Biology. In recent years, nanotechnology has also made development in the oil and gas industry. The drilling fluid is already one of the most important parts in drilling operation.The physical properties of a mud, rheological properties and minimize fluid invasion into the formation with perfect mudcake are important to assist in optimizing results. Nano-materials as one of the achievements of recent years are effective in achieving these purposes. To obtain the above properties, a variety of polymers as... 

    Genome Engineering of Bacillus Subtilis Using CRISPR Technology to Overproduce Protease Production

    , M.Sc. Thesis Sharif University of Technology Sabouri, Zahra (Author) ; Roostaazad, Reza (Supervisor) ; Banaei Moghaddam, Ali Mohammad (Supervisor)
    Abstract
    Enzymes are an important part of detergents, they reduce the activation energy of the reaction and thus increase the efficiency of the process. Protease enzyme is one of the most common enzymes in detergents. Bacillus strain is the most important strain in the production of this enzyme and among the species of Bacillus, Bacillus subtilis is the most used. Bacillus subtilis is a gram-positive, rod-shaped bacterium. This bacterium is considered a non-pathogenic cell that has the ability to form spores and prevent death and damage in harsh conditions. In this study, CRISPR system was used to modify the genome of Bacillus subtilis ATCC 6633 in order to increase alkaline protease. To increase the... 

    Increase Production of the Enzyme by Cell Genetic Modification

    , M.Sc. Thesis Sharif University of Technology Faghihi, Farhad (Author) ; Roosta Azad, Reza (Supervisor) ; Banaei Moghaddam, Ali Mohammad (Supervisor)
    Abstract
    Genetic engineering of cells has been one of the most effective ways to increase protein production in wild strains. Among the various genetic engineering techniques, the CRISPR/Cas9 system that directly edits the cell chromosome, yielding greater efficiency and easier operation. In this study, we used this system to modify the genome of Bacillus subtilis ATCC 6633 to increase the production of extracellular alkaline protease enzyme. Alkaline protease enzyme has many applications in different industries, but in this study, the application of this enzyme in the detergent industry has been considered. To increase the production of this enzyme, we disrupted and prevented the gene responsible... 

    Improving Subtilisin Production by Engineering the Regulatory Regions of aprE in Bacillus Subtilis

    , M.Sc. Thesis Sharif University of Technology Pourmohammad, Mohammad Javad (Author) ; Banaei Moghaddam, Ali Mohammad (Supervisor) ; Yaghmaei, Soheyla (Supervisor) ; Roosta Azad, Reza (Supervisor)
    Abstract
    Industrial enzymes can generally be classified into three groups: carbohydrases, proteases and lipases, which account for a major part of the global enzyme trade. Proteases, in particular, have always been extensively studied and investigated due to their widespread use in various industries, such as food, pharmaceutical, chemical, and agricultural sectors. Proteases are a group of proteolytic enzymes that break down proteins and peptides into their constituent amino acids by hydrolyzing peptide bonds. Among the family of proteases, alkaline serine proteases have special biocatalytic abilities in both aqueous and organic environments. Their suitable resistance in alkaline environments and... 

    Theoretical and Experimental Study of Gas-Solid Fluidized Beds Dpm Approach

    , M.Sc. Thesis Sharif University of Technology Banaei, Mohammad (Author) ; Molaei Dehkordi, Asghar (Supervisor)
    Abstract
    Because of the importance of gas-solid fluidized beds in industrial plants, many efforts have been done for predicting their behavior up to now. Generally, there are two major attitudes for describing and simulating the hydrodynamics of fluidized beds, Eulerian-Eulerian methods and Eulerian-Lagrangian metods. Both of these approaches have their own advantages and disadvantages and a lot of studies have been done to understand the nature of gas-solid fluidized beds with aid of these models. Due to fewer presumptions in the basic structure of Eulerian-Lagrangian methods such as DEM in comparison with Eulerian-Eulerian methods like TFM, these models can predict the hydrodynamics of fluidized... 

    Design and Implementation of a 1-2 GHz Ultra Low Phase Noise Phase Locked Loop using SPD

    , M.Sc. Thesis Sharif University of Technology Abedanzadeh, Amir Hossein (Author) ; Banaei, Ali (Supervisor)
    Abstract
    In this thesis first of all we investigate phase noise and it's generation factors. Then we design and implement an ultra low phase noise oscillator. To do this, an ultra low phase noise oscillator which is tunable in 1-2GHz with 100MHz steps will be designed. The outline of the circuit is as follows: at the first we design a VCO which is ultra low phase noise and mechanically tunable in 1-2GHz by means of rotation of a handle. Then a phase locked loop will be built with the help of an ultra low phase noise OCXO at 100MHz and one SPD1 which generates harmonics of OCXO's output frequency. For the next, design and implementation of a 1.6GHz oscillator with fixed output frequency has been done.... 

    Removal of naphthalene from aqueous solutions by phosphorus doped-titanium dioxide coated on silica phosphoric acid under visible light

    , Article Desalination and Water Treatment ; Volume 224 , 2021 , Pages 187-196 ; 19443994 (ISSN) Banaei, B ; Hassani, A. H ; Tirgir, F ; Fadaei, A ; Borghaei, S. M ; Sharif University of Technology
    Desalination Publications  2021
    Abstract
    In this research, titanium dioxide-phosphorus (TiO2-P) immobilized on silica phosphoric acid (SPA) was prepared by a simple modified sol–gel method with SPA as a precursor instead of phosphoric acid. TiO2-P thin film photocatalyst immobilized on SPA as a novel high-efficiency photocatalyst was investigated to remove naphthalene as a toxic compound from wastewater. The novel resulting photocatalyst were characterized by energy-dispersive X-ray (EDX) and X-ray diffraction pattern revealed nano-photocatalyst TiO2-P with the average size of 15–20 nm. EDX analysis showed the presence of phosphorus elements in the crystalline structure of TiO2 and diffuse reflectance spectroscopy showed the energy... 

    Bubble splitting in a pseudo-2D gas-solid fluidized bed for geldart B-type particles

    , Article Chemical Engineering and Technology ; Vol. 37, Issue. 12 , December , 2014 , PP. 2096-2102 ; ISSN: 09307516 Movahedirad, S ; Dehkordi, A. M ; Molaei, E. A ; Haghi, M ; Banaei, M ; Kuipers, J. A. M ; Sharif University of Technology
    2014
    Abstract
    Bubble splitting in 2D gas-solid freely bubbling fluidized beds is experimentally investigated using digital image analysis. The quantitative results can be applied for the development of a new breakage model for bubbly fluidized beds, especially discrete bubble models. The variation of splitting frequency with bubble diameter, new resulting bubble volumes, positions, and also the assumptions of mass and momentum conservation for bubbles after breakage are studied in detail. Small bubbles are found to be more stable than large ones and nearly all mother bubbles split into two almost equally sized daughter bubbles. The momentum of gas bubbles in the vertical direction remains approximately... 

    Bubble size distribution in two-dimensional gas-solid fluidized beds

    , Article Industrial and Engineering Chemistry Research ; Volume 51, Issue 18 , 2012 , Pages 6571-6579 ; 08885885 (ISSN) Movahedirad, S ; Molaei Dehkordi, A ; Banaei, M ; Deen, N. G ; Van Sint Annaland, M ; Kuipers, J. A. M ; Sharif University of Technology
    2012
    Abstract
    In this article, the digital image analysis (DIA) technique has been used to study the bubble size and bubble size distribution evolution in a pseudo-two-dimensional gas-solid fluidized bed. In addition, a numerical discrete bubble model (DBM) based on the bubble-bubble interactions was developed and the model predictions were compared with the experimental data. The developed model can predict the bubble size and bubble size distribution through the bed height and the lateral distribution of bubbles. Comparison between model predictions and the result of DIA measurements shows that bubble breakage has a significant effect on the bubble size distribution especially at heights far from the... 

    Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent

    , M.Sc. Thesis Sharif University of Technology Mohammad Karami (Author) ; Bazargan, Mohammad (Supervisor)
    Abstract
    The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

    Numerical Analysis of An Annular Gas Turbine Combustor

    , M.Sc. Thesis Sharif University of Technology Gandomi, Mohammad Hossein (Author) ; Farshchi, Mohammad (Supervisor)
    Abstract
    The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating

    , Ph.D. Dissertation Sharif University of Technology Labbaf, Mohammad Hossein (Author) ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)

    SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers

    , M.Sc. Thesis Sharif University of Technology Omati, Mohammad Mahdi (Author) ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
    Abstract
    During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

    Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet

    , M.Sc. Thesis Sharif University of Technology Mohammadi, Mohammad Ali (Author) ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
    Abstract
    In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

    Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach

    , M.Sc. Thesis Sharif University of Technology Makhsousi, Mohammad Hossein (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a... 

    Estimate the Effect of Religiosity on Voter Turnout

    , M.Sc. Thesis Sharif University of Technology Jarrahi, Mohammad Mahdi (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections  

    Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks

    , M.Sc. Thesis Sharif University of Technology Shokouhi, Mohammad Hossein (Author) ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
    Abstract
    Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to...