Loading...
Search for: bayat--maryam
0.132 seconds

    3d Design of a Microfluidic Chip for Anticancer Drugs Screening

    , M.Sc. Thesis Sharif University of Technology Hashemi, Maryam Sadat (Author) ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the... 

    A method for automatic tuning the memristance of memristive devices with the capacity of applying to memristive memories

    , Article 2012 International Conference on Computer Systems and Industrial Informatics, ICCSII 2012, 18 December 2012 through 20 December 2012 ; December , 2012 ; 9781467351577 (ISBN) Merrikh Bayat, F ; Merrikh Bayat, F ; Mirebrahimi, N ; Sharif University of Technology
    2012
    Abstract
    Memristor is the fourth fundamental passive circuit element which has potential applications in development of analog memristive memories, neuroscience, and brain simulation. In all of these applications the memristance of the device should be adjusted to the desired value, which is currently performed by trial and error. The aim of this paper is to propose a new method and develop a circuit for automatic adjustment of the memristance of memristive devices. The proposed method is based on the sliding mode control and numerical simulations show that it can be used for tuning the memristance of such devices with a high accuracy  

    The neuro-fuzzy computing system with the capacity of implementation on a memristor crossbar and optimization-free hardware training

    , Article IEEE Transactions on Fuzzy Systems ; Vol. 22, Issue. 5 , 2014 , Pages 1272-1287 ; ISSN: 10636706 Merrikh-Bayat, F ; Merrikh-Bayat, F ; Shouraki, S. B ; Sharif University of Technology
    2014
    Abstract
    In this paper, first we present a new explanation for the relationship between logical circuits and artificial neural networks, logical circuits and fuzzy logic, and artificial neural networks and fuzzy inference systems. This shows us that neural networks are working in the same way as logical circuits when the connection between them is through the fuzzy logic. However, themain difference between them is that logical circuits can be constructed without using any kind of optimization-based learning methods. Based on these results, we propose a new neuro-fuzzy computing system. As verified by simulation results, it can effectively be implemented on the memristor crossbar structure and... 

    Memristive fuzzy edge detector

    , Article Journal of Real-Time Image Processing ; Vol. 9, issue. 3 , September , 2014 , pp. 479-489 ; Online ISSN: 1861-8219 Merrikh-Bayat, F ; Bagheri Shouraki, S ; Merrikh-Bayat, F ; Sharif University of Technology
    2014
    Abstract
    Fuzzy inference systems always suffer from the lack of efficient structures or platforms for their hardware implementation. In this paper, we tried to overcome this difficulty by proposing a new method for the implementation of the fuzzy rule-based inference systems. To achieve this goal, we have designed a multi-layer neuro-fuzzy computing system based on the memristor crossbar structure by introducing a new concept called the fuzzy minterm. Although many applications can be realized through the use of our proposed system, in this study we only show how the fuzzy XOR function can be constructed and how it can be used to extract edges from grayscale images. One main advantage of our... 

    Memristor crossbar-based hardware implementation of fuzzy membership functions

    , Article Proceedings - 2011 8th International Conference on Fuzzy Systems and Knowledge Discovery, FSKD 2011, 26 July 2011 through 28 July 2011 ; Volume 1 , July , 2011 , Pages 645-649 ; 9781612841816 (ISBN) Merrikh Bayat, F ; Shouraki, S. B ; Merrikh Bayat, F ; Sharif University of Technology
    2011
    Abstract
    In May 1, 2008, researchers at Hewlett Packard (HP) announced the first physical realization of a fundamental circuit element called memristor that attracted so much interest worldwide. This newly found element can easily be combined with crossbar interconnect technology which this new structure has opened a new field in designing configurable or programmable electronic systems. These systems in return can have applications in signal processing and artificial intelligence. In this paper, based on the simple memristor crossbar structure, we propose new and simple circuits for hardware implementation of fuzzy membership functions. In our proposed circuits, these fuzzy membership functions can... 

    Model Checking of Stochastic Activity Networks

    , M.Sc. Thesis Sharif University of Technology Maryam Bagheri (Author) ; Movaghar, Ali (Supervisor)
    Abstract
    Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the... 

    Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter

    , M.Sc. Thesis Sharif University of Technology Khalighi, Sadaf (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac... 

    Robust Estimation and Control of a Planet Lander

    , M.Sc. Thesis Sharif University of Technology Ahmadvand, Reza (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of... 

    Optimal Control of Unknown Interconnected Systems via Distributed Learning

    , M.Sc. Thesis Sharif University of Technology Farjadnasab, Milad (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement... 

    Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft

    , M.Sc. Thesis Sharif University of Technology Baradaran, Behdad (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this... 

    Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach

    , M.Sc. Thesis Sharif University of Technology Moushaee, Pegah (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops... 

    Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model

    , M.Sc. Thesis Sharif University of Technology Heidari, Faranak (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,... 

    Design of Microfluidic Chip for 3D Cell Culture

    , M.Sc. Thesis Sharif University of Technology Ghobadi, Faezeh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this... 

    Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm

    , M.Sc. Thesis Sharif University of Technology Asgari, Houman (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and... 

    Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment

    , M.Sc. Thesis Sharif University of Technology Moosavi, Farzan (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s... 

    Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning

    , M.Sc. Thesis Sharif University of Technology Delshad, Aria (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key... 

    Employing humanoid robots for teaching english language in Iranian junior high-schools [electronic resource]

    , Article International Journal of Humanoid Robotics ; Vol. 11, No. 3 (2014) 1450022 Alemi, M. (Minoo) ; Meghdari, Ali ; Ghazisaedy, Maryam ; Sharif University of Technology
    Abstract
    This paper presents the effect of robotics assisted language learning (RALL) on the vocabulary learning and retention of Iranian English as foreign language (EFL) junior high school students in Tehran, Iran. After taking a vocabulary pre-test, 46 beginner level female students at the age of 12, studying in their first year of junior-high participated in two groups of RALL (30 students) and non-RALL (16 students) in this study. The textbook used was the English book (Prospect-1) devised by the Iranian Ministry of Education for 7th graders, and the vocabulary taught and tested (pre-test and post-test) were taken from this book. Moreover, the treatment given by a teacher accompanied by a... 

    Analysis of Structured Controllers Stabilization: A Graph Theoretic Approach

    , M.Sc. Thesis Sharif University of Technology Mosalli, Hesamoddin (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    In this thesis, a new method is proposed to find the class of stabilizing control structures for interconnected systems from a graphtheoretic
    perspective. The objective is to classify all possible control structures (static or dynamic), capable of stabilizing the closedloop system. The method can be formulated by using the characteristics of fixed modes of the system for arbitrary control structures.To this end, first, a method is proposed based on solving a set of discrete linear programming to determine whether a system is stabilizable via a decentralized controller. Subsequently, by solving a set of discrete linear feasibility problems, all possible stabilizing controller structures... 

    Simulating Structure Formation in Modified Newtonian Dynamics

    , M.Sc. Thesis Sharif University of Technology Mirkamali, Maryam Sadat (Author) ; Rahvar, Sohrab (Supervisor)
    Abstract
    We simulated the structure formation in the context of Modified Newtonian Dynamics with the spherical collapse model. We supposed a spherical region with mass of galactic order, positive density contrast and uniform distribution of matter as the initial condition and investigated the evolution of its internal regions, containing different amounts of matter. We began the simulation when the region was in Newtonian regime. The overdense region, which expands with cosmic fluid in Newtonian regime, gradually enters MONDian regime and gets separated from the background due to its stronger central acceleration; then it collapses and virializes after some swings. The density distribution of the... 

    Distributed Design of Structured Optimal Controllers Using Chordal Decomposition

    , M.Sc. Thesis Sharif University of Technology Belbasi, Mohammad Reza (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis addresses the distributed optimal control problem. In order to solve this problem a suboptimal distributed design approach has been developed using tools from graph theory and optimization theory. The first objective of this thesis is overcoming the non-scalability of distributed control problems for larges -scale systems. The second objective is using minimum information of other subsystems in the design layer. First, the problems of designing a structured controller minimizing the H_2 and H_∞ norms of the closed-loop system have been formulized and stated as semidefinite optimization problems. Then in order to use the fundamental results that links the chordal graphs and...