Sharif Digital Repository

In this study the effect of different nitrogen source substrates on the amount of chitosan production by Aspergillus niger was investigated. A. niger PTCC 5012 from the Persian Type Culture Collection (PTCC) was grown on soy bean, corn seed and canola residues at 30 °C for specified cultivation days under sterilized conditions. Chitosan was extracted from the fungal mycelia using hot alkaline and acid treatment. The results were shown that soy bean residue at moisture of 37% and 8.4 ± 0.26 % of nitrogen content produced the highest amount of chitosan (17.053 ± 0.95 g/kg of dry substrate), after 12 days of incubation. Corn seed residue produced very low amount of chitosan (1.9 ± 0.4 % of... 

In this paper, we provide a simple framework for deriving one-shot achievable bounds for some problems in quantum information theory. Our framework is based on the joint convexity of the exponential of the collision relative entropy and is a (partial) quantum generalization of the technique of Yassaee et al. from classical information theory. Based on this framework, we derive one-shot achievable bounds for the problems of communication over classical-quantum channels, quantum hypothesis testing, and classical data compression with quantum side information. We argue that our one-shot achievable bounds are strong enough to give the asymptotic achievable rates of these problems even up to the... 

Removal of zirconium from its dilute aqueous solution using Aspergillus niger as a dried and living biomass was investigated. Through that, the effect of some operational parameters on biosorption, including pH, temperature, contact time, initial concentration of zirconium and dose of biomass, were studied. Based on the results, it was concluded that the uptake of zirconium by both dried and living biomasses is pH dependent, and maximum uptake was observed in pH = 3.1 for both biomasses. The maximum uptake capacity of the living biomass was obtained at 30°C. However, the biosorption of zirconium by dried biomass was not affected by temperature. The maximum uptake capacity for living and... 

Three strategies were employed for the assembly of gold nanoparticles on silica-coated magnetite particles (SCMPs). In strategy I, citrate-coated gold nanoparticles were attached on the surface of amine-SCMPs. In strategy II, amine-SCMPs were coated with carboxylated gold nanoparticles via amide bond formation. In strategy III, the thiol-SCMPs surface was coated with gold nanoparticles. Among the above examined strategies, coating amine-SCMPs with gold nanoparticles via strategy I resulted in a better coverage and stronger intensity of absorption bands. Furthermore, results obtained through strategy I showed that decreasing the pH of the solution from 7 to 3 leads to a further red-shift of... 

Superparamagnetic iron oxide nanoparticles were synthesized by coprecipitation of iron chloride salts at various pH values (9, 10, 11 and12) that were adjusted using an ammonia solution. Increasing the pH from 9 to 12 led to decreases in the size of iron oxide nanoparticles from 7.9±1.4 to 5±0.6 nm and the saturation magnetization (M s) from 82.73 to 67.14 emu/g, respectively, when analyzed with transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). X-ray diffraction patterns as well as M s values showed that magnetite is the dominantly synthesized phase in the examined pH values. Unmodified iron oxide nanoparticles were coated with silica via the hydrolysis and... 

Expressions of several capacity regions in quantum information theory involve an optimization over auxiliary quantum registers. Evaluating such expressions requires bounds on the dimension of the Hilbert space of these auxiliary registers, for which no nontrivial technique is known; we lack a quantum analog of the Carathéodory theorem. In this paper, we develop a new non-Carathéodory-type tool for evaluating expressions involving a single quantum auxiliary register and several classical random variables. As we show, such expressions appear in problems of entanglement-assisted Gray-Wyner and entanglement-assisted channel simulation, where the question of whether entanglement helps in these... 

A function is said to be additive if, similar to mutual information, expands by a factor of n, when evaluated on n i.i.d. repetitions of a source or channel. On the other hand, a function is said to satisfy the tensorization property if it remains unchanged when evaluated on i.i.d. repetitions. Additive rate regions are of fundamental importance in network information theory, serving as capacity regions or upper bounds thereof. Tensorizing measures of correlation have also found applications in distributed source and channel coding problems as well as the distribution simulation problem. Prior to our work only two measures of correlation, namely the hypercontractivity ribbon and maximal... 

Non-locality is the phenomenon of observing strong correlations among the outcomes of local measurements of a multipartite physical system. No-signaling boxes are the abstract objects for studying non-locality, and wirings are local operations on the space of no-signaling boxes. This means that, no matter how non-local the nature is, the set of physical non-local correlations must be closed under wirings. Then, one approach to identify the non-locality of nature is to characterize the closed sets of non-local correlations. Although non-trivial examples of wirings of no-signaling boxes are known, there is no systematic way to study wirings. In particular, given a set of no-signaling boxes, we... 

In this paper, we consider the problem of simulating one copy of a zero-capacity two-way channel from arbitrary many copies of another two-way channel. The motivation for this problem comes from foundation of quantum physics where zero-capacity two-way channels (a.k.a. no-signaling boxes) serve as the abstract objects for studying non-locality. We provide necessary conditions for the possibility of channel simulation using two measures of correlation, namely maximal correlation and hypercontractivity ribbon. It is shown that when these measures are defined appropriately for two-way channels, they are monotonically decreasing under local operations. Our result allows us to establish a... 

A measure of correlation is said to have the tensorization property if it does not change when computed for i.i.d. copies. More precisely, a measure of correlation between two random variables X, Y denoted by rho (X, Y), has the tensorization property if ρ(Xn, Yn)=ρ (X, Y) where (Xn, Yn) denotes n i.i.d. copies of (X, Y). Two well-known examples of such measures are the maximal correlation and the hypercontractivity ribbon (HC ribbon). We show that the maximal correlation and the HC ribbon are special cases of the new notion of Φ-ribbons, defined in this paper for a class of convex functions Φ. Φ-ribbon reduces to the HC ribbon and the maximal correlation for special choices of Φ, and is a... 

In this paper, a low power receiver for medical implant communication service (MICS) is presented. Low power design is vital in the MICS applications since the implanted chip has to work for a long time without the need to change its battery. As a result, a merged N-path low noise amplifier (LNA) and mixer block is proposed. In this structure, the LNA and down-conversion mixer share a transconductance to lower the overall power consumption. An N-path feedback is utilized around the shared transconductance not only to improve the LNA selectivity and relax the linearity requirements but also to downconvert the radio frequency (RF) component and create the intermediate frequency (IF) signal. In... 

We propose a self-adaptive process (SAP) that maintains the software architecture quality using the MAPE-K standard model. The proposed process can be plugged into various software development processes and service-oriented methodologies due to its explicitly defined inputs and outputs. To this aim, the proposed SAP is integrated with the service-oriented modeling and application (SOMA) methodology in a two-layered structure to create a novel methodology, named self-adaptive service-oriented architecture methodology (SASOAM), which provides a semi-automatic self-aware method by the composition of architectural tactics. Moreover, the maintenance activity of SOMA is improved using... 

We propose a self-adaptive process (SAP) that maintains the software architecture quality using the MAPE-K standard model. The proposed process can be plugged into various software development processes and service-oriented methodologies due to its explicitly defined inputs and outputs. To this aim, the proposed SAP is integrated with the service-oriented modeling and application (SOMA) methodology in a two-layered structure to create a novel methodology, named self-adaptive service-oriented architecture methodology (SASOAM), which provides a semi-automatic self-aware method by the composition of architectural tactics. Moreover, the maintenance activity of SOMA is improved using... 

We propose a self-adaptive process (SAP) that maintains the software architecture quality using the MAPE-K standard model. The proposed process can be plugged into various software development processes and service-oriented methodologies due to its explicitly defined inputs and outputs. To this aim, the proposed SAP is integrated with the service-oriented modeling and application (SOMA) methodology in a two-layered structure to create a novel methodology, named self-adaptive service-oriented architecture methodology (SASOAM), which provides a semi-automatic self-aware method by the composition of architectural tactics. Moreover, the maintenance activity of SOMA is improved using... 

In this study chitosan hydrogel beads with porosity ∼ 0.86 and diameter ∼ 2 ± 0.07 mm were prepared from 85 % deacetylated chitosan for removal of Cd2+ ions from aqueous solutions. Chitosan powder was dissolved into dilute acetic acid as solvent and formed into spherical beads using a phase inversion technique. The effect of temperature, initial concentration of Cd2+ ions, and the period of agitation were perused to achieve the best isotherm model. Freundlich model was better fitted than Langmuir model (R2 > 0.99 and R2> 0.93 respectively, at pH of 6.3, and shaker speed of 200 rpm), the constants of Langmuir and Freundlich models were calculated, which RL value and qmax (mg/g wet weight) at...