Sharif Digital Repository

This paper presents a new point-to-face contact algorithm for contacts between two polyhedrons with planar boundaries. A new discrete numerical method called three-dimensional discontinuous deformation analysis (3-D DDA) is used and formulations of normal contact submatrices based on the proposed algorithm are derived. The presented algorithm is a simple and efficient method and it can be easily coded into a computer program. This approach does not need to use an iterative algorithm in each time step to obtain the contact plane, unlike the ‘Common-Plane’ method applied in the existing 3-D DDA. In the present 3-D DDA method, block contact constraints are enforced using the penalty method.... 

This paper presents a new numerical model that can add a finite element mesh into each block of the three-dimensional discontinuous deformation analysis (3-D DDA), originally developed by Gen-hua Shi. The main objectives of this research are to enhance DDA block's deformability. Formulations of stiffness and force matrices in 3-D DDA with conventional Trilinear (8-node) and Serendipity (20-node) hexahedral isoparametric finite elements meshed block system due to elastic stress, initial stress, point load, body force, displacement constraints, inertia force, normal and shear contact forces are derived in detail for program coding. The program code for the Trilinear and Serendipity hexahedron... 

Intermittency of height fluctuations in stationary state of the Kardar-Parisi-Zhang (KPZ) equation with infinitesimal surface tension in 1+1 dimensions was discussed. Stochastic differential equations were used for the study. It was found that the probability density function [in 1+1] is independent of the coefficient of the linear term. When the random force with smooth spatial correlation was considered, the problem changed to a more complicated one  

The reliability Studies are done in order to determine the probability of functioning or availability of different engineering systems. These studies can also provide a basis for comparing different structures of a system and can be used as a tool to improve the system design. Also, reliability is an important consideration in the planning, design and operation of transit system. Since the issue of the reliability of electric vehicles has not been sufficiently and seriously evaluated yet, so in this paper, the reliability of the various types of these kinds of vehicles will be discussed and then the reliability indices of them will be compared with each other and with the conventional cars  

In this study, hydrogen generation is maximised by optimising the size and the operating conditions of an electrolyser (EL) directly connected to a photovoltaic (PV) module at different irradiance. Due to the variations of maximum power points of the PV module during a year and the complexity of the system, a nonlinear approach is considered. A mathematical model has been developed to determine the performance of the PV/EL system. The optimisation methodology presented here is based on the particle swarm optimisation algorithm. By this method, for the given number of PV modules, the optimal sizeand operating condition of a PV/EL system areachieved. The approach can be applied for different... 

As computer simulation increasingly supports engineering design, the requirement for a computer software environment providing an integration platform for computational engineering software increases. A key component of an integrated environment is the use of computational engineering to assist and support solutions for complex design. In the present paper, an integrated software environment is demonstrated for multi-disciplinary computational modeling of structural and geotechnical problems. The SUT-DAM is designed in both popularity and functionality with the development of user-friendly pre- and post-processing software. Pre-processing software is used to create the model, generate an... 

Normal human breathing exhibits complex variability in both respiratory rhythm and volume. Analyzing such nonlinear fluctuations may provide clinically relevant information in patients with complex illnesses such as asthma. We compared the cycle-by-cycle fluctuations of inter-breath interval (IBI) and lung volume (LV) among healthy volunteers and patients with various types of asthma. Continuous respiratory datasets were collected from forty agematched men including 10 healthy volunteers, 10 patients with controlled atopic asthma, 10 patients with uncontrolled atopic asthma, and 10 patients with uncontrolled non-atopic asthma during 60 min spontaneous breathing. Complexity of breathing... 

In this paper, the three-dimensional large frictional contact deformation of powder forming process is modeled using a node-to-surface contact algorithm based on the penalty and augmented-Lagrange approaches. The technique is applied by imposing the normal and tangential contact constraints and modifying the contact properties of frictional slip. The Coulomb friction law is employed to simulate the friction between the rigid punch and the work piece. It is shown that the augmented-Lagrange technique significantly improves imposing of the constraints on contact surfaces. In order to predict the non-uniform relative density and stress distributions during the large deformation of powder... 

In this paper, the three-dimensional large deformation frictional contact of powder forming process is modeled using a simple computational algorithm based on the augmented-Lagrange approach. The technique is applied by imposing the contact constraints and modifying the contact properties of frictional slip through the node-to-surface (NTS) contact algorithm. The Coulomb friction law is employed to simulate the friction between the rigid punch and the work-piece by the use of penalty and augmented-Lagrange approaches. It is shown that the augmented-Lagrange technique significantly improves imposing of the constraints on contact surfaces. The nonlinear contact friction algorithm is employed... 

In present work, a novel supported bucky paper (BP) membrane was fabricated and evaluated for humic acid (HA) removal from water. For better understanding the effect of operating variables, response surface methodology (RSM) was also applied. Three independent parameters namely TOC concentration (5, 10 and 15 mg l-1), operating time (10, 20 and 30 min) and transmembrane pressure (TMP) (1, 2 and 3 bar) were selected for TOC removal (%) and permeate flux analysis. The results revealed that the membrane could effectively remove HA primarily through electrostatic repulsion and then adsorption mechanisms. The study also showed that about 65% and 35% of the removed HA were through repulsion and... 

In this paper, we study the impact of sensing error and channel fading on the decision process of a multiple secondary user network in a primary network whose channel occupancy states are modelled as a Bernoulli process. We present a randomized access strategy to maximize total secondary network throughput. The proposed method guarantees that the probability of collision between primary and secondary users in each channel is less than the predefined value of Pc = ξ. To find the optimal access strategy, we formulate secondary network throughput as an optimization problem. Then, using the KKT method to find the solution, we break the original problem into multiple sub-problems. Then, we employ... 

Let δ be a (d-1)-dimensional simplicial complex and let h(δ)=(h0,h1,...,hd) be its h-vector. A recent result of Murai and Terai guarantees that if δ satisfies Serre's condition (Sr), then (h0,h1,...,hr) is an M-vector and hr+hr+1+...+hd is nonnegative. In this article, we extend the result of Murai and Terai by giving r extra necessary conditions. More precisely, we prove that if δ satisfies Serre's condition (Sr), then iihr+i+1ihr+1+...+i+d-rihd, 0≤i≤r≤d, are all nonnegative  

Background: Nowadays, study and application of modified membranes for water treatment have been considered significantly. The aim of this study was to prepare and characterize a polysulfone (PSF)/graphene oxide (GO) nanocomposite membrane and to evaluate for arsenate rejection from water. Materials and methods: The nanocomposite PSF/GO membrane was fabricated using wet phase inversion method. The effect of GO on the synthesized membrane morphology and hydrophilicity was studied by using FE-SEM, AFM, contact angle, zeta potential, porosity and pore size tests. The membrane performance was also evaluated in terms of pure water flux and arsenate rejection. Results: ATR-FTIR confirmed the... 

Site visits of selected factories and mines show large amounts of coal were collected as spoil and waste outside these locations due to un-efficiency of coal exploiting technology from mined material. The coal content of these waste materials is about 60%. In this work, we propose a method to be used for complete consumption of these materials in industry. In some samples, volume and weight of spoils could be decreased by half. This review also shows that aluminum oxide in industrial and minerals spoils are high, in some samples up to 25%. We suggest some remedies, e.g. we can use ashes produced by complete combustion of coal for production of aluminum hydroxide thus making it economical.... 

We present and evaluate Deep Private-Feature Extractor (DPFE), a deep model which is trained and evaluated based on information theoretic constraints. Using the selective exchange of information between a user's device and a service provider, DPFE enables the user to prevent certain sensitive information from being shared with a service provider, while allowing them to extract approved information using their model. We introduce and utilize the log-rank privacy, a novel measure to assess the effectiveness of DPFE in removing sensitive information and compare different models based on their accuracy-privacy trade-off. We then implement and evaluate the performance of DPFE on smartphones to... 

The behavior of an electrified liquid jet breakup and modes of disintegration were investigated at different flow rates and voltages. The current phenomenology belongs to a new injector introduced recently by Morad et al. (2016). This injector has proven to highly extend the stability and flow rate of electrospray particularly in the Taylor cone-jet mode. The experimental investigation was performed using a high-power light-emitting diode (LED) illumination as the light source. The light source was developed to operate in the pulsing condition when synchronized with a digital camera and was particularly designed to function properly in the presence of high electromagnetic interference (EMI).... 

An aggregate production–distribution (P-D) planning generates an aggregate plan for regular time, overtime, outsourcing, hiring, and firing that takes into account distributing, inventory holding, backordering, and machine capacity for a definite planning horizon. A large number of P-D problems require decisions to be made in the presence of uncertainty. Previous research on this topic mainly utilized either stochastic programming or fuzzy programming to cope with the uncertainty. This may lead into huge challenges for supply chain managers that use non-robust P-D planning in uncertain environments. Moreover, there has been little discussion about robust optimization approach in aggregate... 

In this research, an economic order quantity (EOQ) model is first developed for a two-level supply chain system consisting of several products, one supplier and one-retailer, in which shortages are backordered, the supplier's warehouse has limited capacity and there is an upper bound on the number of orders. In this system, the supplier utilizes the retailer's information in decision making on the replenishments and supplies orders to the retailer according to the well known (R, Q) policy. Since the model of the problem is of a non-linear integer-programming type, a genetic algorithm is then proposed to find the order quantities and the maximum backorder levels such that the total inventory... 

In this paper, an h-adaptive mesh refinement is presented based on the gradient of deformation in the modeling of localization due to material instability. As the classical continuum models suffer from pathological mesh dependence in the strain-softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once the new element size and its alignment have been indicated, an automated procedure is used to construct the mesh according to a predetermined size and elongation...