Loading...
Search for:
biazar--sina
0.086 seconds
Advanced Electromagnetics and Scattering Theory
, Book ; Khorasani, Sina
Springer
2015
Abstract
This book present the lecture notes used in two courses that the late Professor Kasra Barkeshli had offered at Sharif University of Technology, namely, . The prerequisite for the sequence is vector calculus and electromagnetic fields and waves. Some familiarity with Green's functions and integral equations is desirable but not necessary.
The book provides a brief but concise introduction to classical topics in the field. It is divided into three parts including annexes. Part I covers principle of electromagnetic theory. The discussion starts with a review of the Maxwell's equations in differential and integral forms and basic boundary conditions. The solution of inhomogeneous wave...
The book provides a brief but concise introduction to classical topics in the field. It is divided into three parts including annexes. Part I covers principle of electromagnetic theory. The discussion starts with a review of the Maxwell's equations in differential and integral forms and basic boundary conditions. The solution of inhomogeneous wave...
Preparation and characterization of starch-based composite films reinforced by cellulose nanofibers
, Article International Journal of Biological Macromolecules ; Volume 116 , 2018 , Pages 272-280 ; 01418130 (ISSN) ; Keley, M ; Biazar, E ; Sharif University of Technology
Elsevier B.V
2018
Abstract
The current study deals with the preparation and characterization of polysaccharide-based biocomposite films acquired by the incorporation of cellulose nanofiber within glycerol plasticized matrix formed by starch. The application of starch-based films is limited due to highly hydrophilic nature and poor mechanical properties. These problems are solved by forming a nanocomposite of thermoplastic starch (TPS) as matrix and cellulose nanofiber (CNF) as reinforcement. CNF is successfully prepared from short henequen fibers which consist of almost 60% cellulose by a chemo-mechanical process. TPS/CNF composite films are prepared by the polymer solution casting method, and their characterizations...
Coordinating a seller-buyer supply chain with a proper allocation of chain’s surplus profit using a general side-payment contract [electronic resource]
, Article International Journal of Industrial and Systems Engineering ; Volume 5, No. 2, Summer 2011, Page 63-79 ; Eshghi, Kourosh ; Sharif University of Technology
Abstract
In this paper, seller-buyer supply chain coordination with general side-payment contracts is introduced to gain the maximum possible chain profit. In our model, the logistics costs for both buyer and seller are considered and the final demand is also supposed to be a decreasing function of the retail price. Since parties aim to maximize their individual profits, the contractual parameters are set in a way that these decisions become aligned with system optimal decisions. Therefore, a side payment contract is suggested in our model to assign the chain surplus profit to the chain members such that they have no intention to leave the coalition. Then, we change the contract into a quantity...
Probabilistic Modeling of Networked Infrastructure in Community Resilience Analysis
, M.Sc. Thesis Sharif University of Technology ; Mahsuli, Mojtaba (Supervisor) ; Safdarian, Amir (Co-Supervisor)
Abstract
This thesis proposes a probabilistic modeling framework for networked infrastructure systems in community resilience analysis. In particular, the framework is presented for the electric power infrastructure. Models are proposed at two levels of refinement. The basic model only determines the connectivity of different elements in the network, whereas the refined model also quantifies the amount of the power transmitted through the network elements. In a community resilience analysis, the proposed basic model provides a rather simple tool to determine those buildings and infrastructure systems that suffer from power outage when the supplying power station loses connectivity with the network....
Photonic Crystal Cavity Quantum Optic in the Very Strong Coupling Regime
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
First, we peruse the intraction between a quantized light and a two level atom which has been described by Janes-Cummings-Paul Hamiltonian. By solving Heisenberg equations in Fourier space and describing electric field by a generalized-transverse Green function, we obtain spectral density for a quantum dot which is in the strong coupling to a slab photonic crystal cavity. Afterward, by solving Shrouding equations precisely we demonstrate when quantum dot is in a very strong coupling to cavity, rotate wave approximation is not reliable anymore. It means that if coupling constant gets comparable to cavity mode frequency then the prevalent approach to solve this Hamiltonian will not be correct....
Analysis of Ultra-Strong Coupling in Optical Waveguides
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
In this project, we were intended to study the ultra-strong coupling in optical waveguides. Hence, we analyze the interaction of an electromagnetic wave with a quantum well embedded in a dielectric slab waveguide. First, we designed a QW with and alloys, which the energy of its electron-heavy holes transition is . By exploiting the envelope function approximation, we derived the wavefunction of electrons and holes, their eigen-energies, and the dipole moment of electon-holes. For finding the wavefunction of holes and their eigen-energies, we used the Luttinger Hamiltonian. Next, we calculated the electrical susceptibility of a three level quantum system (as a model for QW), by using...
Cavity Quantum Electro-Dynamics in Ultra-Strong Coupling Regime
,
M.Sc. Thesis
Sharif University of Technology
;
Khorasani, Sina
(Supervisor)
Abstract
Cavity Quantum Electro-Dynamics (CQED) in Weak, Strong and Ultra-Strong coupling Regimes are studied. A MATLAB m-file is written which is able to solve any arbitrary CQED configuration. This program demands input data such as number of Quantum Dots, number of energy levels of each Quantum Dot, energies of each energy level of Quantum Dots, Number of cavity modes, eign-frequency of each cavity mode, coupling constant, dipole strength of each allowed transition of Quantum Dots and initial state of system from user and begins to solve the Schrodinger equation for annihilation and atomic ladder operators. In addition, coefficients of each possible ket will be calculated. Since, any approximation...
Nonlinear Torsional Vibrations of Thin Walled Beam with Semi-Analytic Methods
, Ph.D. Dissertation Sharif University of Technology ; Haddadpour, Hassan (Supervisor)
Abstract
Thin Walled Beams are widely used in engineering applications with the minimum weight design criteria, ranging from civil to aerospace and many other industrial fields. The weight reduction of the beam leads to importance of the dynamic behavior of the structure. Frequently used thin walled beams have low torsional stiffness and their torsional deformations may be of such magnitudes that it is not adequate to treat the angles of cross section rotation as small. When the vibration amplitudes are moderate or large, the geometric nonlinearity must be included and some new phenomena which do not exist in linear torsional dynamic come into play. Unfortunately, the equations of motion of nonlinear...
Design and Analysis of Delay Lines Based on Photonic Crystal Coupled Cavities
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
In the recent years, photonic crystal (PhC) devices vastly have been paid attention due to their ignorable loss, very low group velocity, flexibility in shape and dimension.In this thesis a PhC coupled cavity ring known as superresonator is introduced and its properties and applications is studied. Also modes of the structure are extracted through both coupled-resonator model and FDTD method, and two of its application is described and studied. Add-drop filter is one of the essential devices in WDM systems. First, an application of superresonator in designing add-drop filters is explained and a novel filter based on the superresonator is introduced and analyzed by FDTD and coupled mode...
Axial-torsional vibrations of rotating pretwisted thin walled composite beams
, Article International Journal of Mechanical Sciences ; Vol. 80 , 2014 , pp. 93-101 ; ISSN: 00207403 ; Haddadpour, H ; Sharif University of Technology
2014
Abstract
Axial-torsional vibrations of rotating pretwisted thin-walled composite box beams exhibiting primary and secondary warping are investigated. Considering the nonlinear strain-displacement relations, the coupled nonlinear axial-torsional equations of motion are derived using Hamilton's principle. Ignoring the axial inertia term leads to differential equation of motion in terms of elastic torsion in the case of axially immovable beams. Centrifugal load in the presence of material anisotropy and pretwist angle leads to an induced static torque. The nonlinear equation should be linearized about the corresponding equilibrium state to obtain the linear differential equation of motion. Extended...
Comment on "vibration of turbomachinery rotating blades made-up of functionally graded materials and operating in a high temperature field" by S-Y. Oh, L. Librescu and O. Song (Acta Mech. 166, 69-87, 2003)
, Article Acta Mechanica ; Volume 218, Issue 3-4 , 2011 , Pages 375-376 ; 00015970 (ISSN) ; Haddadpour, H ; Sharif University of Technology
2011
Response to the Authors' reply to the Comment on "vibration of turbomachinery rotating blades made-up of functionally graded materials and operating in a high temperature field", doi:10.1007/s00707-010-0407-5
, Article Acta Mechanica ; Volume 218, Issue 3-4 , 2011 , Pages 379-382 ; 00015970 (ISSN) ; Haddadpour, H ; Sharif University of Technology
2011
The Selection of Appropriate Method for the Degradation of Microplastics
, M.Sc. Thesis Sharif University of Technology ; Yaghmaei, Soheila (Supervisor) ; Ghobadinejad, Zahra (Supervisor)
Abstract
Microplastics are pollutants that are very resistant to natural decomposition and have become a threat to human health by entering the food chain and accumulating in the body. In this research, the second stage of the two-stage treatment of light density polyethylene microplastics was carried out to investigate the effect of pre-treatment on the removal efficiency of this pollutant. For this purpose, the microplastic samples, which were subjected to a pre-treatment stage with advanced oxidation processes, were again subjected to biological degradation by a bacterial consortium for 2 months. The pretreatment processes used were Fenton and Feredfenton reactions, and the bacterial consortium...
Effects of resistive loads and tire inflation pressure on tire power losses and CO2 emissions in real-world conditions
,
Article
Applied Energy
;
2015
;
ISSN: 03062619
; Nasiri, S
; Karkhaneh, V
;
Sharif University of Technology
2015
Abstract
Considerable portion of energy losses in a vehicle traced to tire. Energy losses in a tire are due to tire longitudinal slip as well as rolling resistance. Hence, both of aforementioned factors must take into the consideration to study the tire energy loss. Present paper aims to investigate the power losses in tires and to examine influence of road conditions and tire inflation pressure on them. To cover the real-world conditions, experiments were done on a gasoline-fueled passenger vehicle on an urban highway along two routes with same length and opposite gradients to comprise the change of road conditions. Then, by use of engine performance model which is prepared in dynamometer...
Effects of resistive loads and tire inflation pressure on tire power losses and CO2 emissions in real-world conditions
, Article Applied Energy ; Volume 157 , November , 2015 , Pages 974-983 ; 03062619 (ISSN) ; Nasiri, S ; Karkhaneh, V ; Sharif University of Technology
Elsevier Ltd
2015
Abstract
Considerable portion of energy losses in a vehicle traced to tire. Energy losses in a tire are due to tire longitudinal slip as well as rolling resistance. Hence, both of aforementioned factors must take into the consideration to study the tire energy loss. Present paper aims to investigate the power losses in tires and to examine influence of road conditions and tire inflation pressure on them. To cover the real-world conditions, experiments were done on a gasoline-fueled passenger vehicle on an urban highway along two routes with same length and opposite gradients to comprise the change of road conditions. Then, by use of engine performance model which is prepared in dynamometer...
Explicit degradation modelling in optimal lead-acid battery use for photovoltaic systems
, Article IET Generation, Transmission and Distribution ; Volume 10, Issue 4 , 2016 , Pages 1098-1106 ; 17518687 (ISSN) ; Rajabi Ghahnavieh, A ; Sharif University of Technology
Institution of Engineering and Technology
2016
Abstract
Lead-acid battery is a storage technology that is widely used in photovoltaic (PV) systems. Battery charging and discharging profiles have a direct impact on the battery degradation and battery loss of life. This study presents a new 2-model iterative approach for explicit modelling of battery degradation in the optimal operation of PV systems. The proposed approach consists of two models: namely, economic model and degradation model which are solved iteratively to reach the optimal solution. The economic model is a linear programming optimisation problem that calculates the optimal hourly battery use profile based on an assumed value of the battery degradation cost. The degradation model,...
Behavior Patterns Analysis of Cavity Quantum Electro-Dynamics in Complex Systems for Different Coupling Regimes
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
In this M.Sc. thesis the behavior patterns of the cavity quantum electrodynamics of complex systems are analyzed, such systems are quantum optic multi-partite systems and consist of an arbitrary number of quantum dots in interaction with arbitrary number of cavity modes.
First, the coefficients matrix of the ket sate of the system was measured, in order to achieve it; the general time-dependent state of the most general possible system was specified. Its related Hamiltonian was written, and finally the Schrodinger equation was measured in different coupling regimes. It was done in Schrodinger picture without any approximation.Second, the presence probabilities of the quantum dots of any...
First, the coefficients matrix of the ket sate of the system was measured, in order to achieve it; the general time-dependent state of the most general possible system was specified. Its related Hamiltonian was written, and finally the Schrodinger equation was measured in different coupling regimes. It was done in Schrodinger picture without any approximation.Second, the presence probabilities of the quantum dots of any...
Transistor Based on Graphane
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
In the recent years, field effect transistor has been made by using graphane. But there has not been any study about bipolar transistor. Bipolar transistor can’t be constructed using graphene due to the fact that its band gap is zero. So in this thesis, in an attempt to remove this difficulty, the bipolar transistor made using graphane has been investigated and their property has been compared to those of three dimensional silicon transistors.
At the beginning of the thesis, we will have a review of graphane diode and will consider the procedure for evaluating its current which would be the report of what has been done sofar. After that we made graphane transistor using graphane diode...
At the beginning of the thesis, we will have a review of graphane diode and will consider the procedure for evaluating its current which would be the report of what has been done sofar. After that we made graphane transistor using graphane diode...
Cavity Quantum Electrodynamics in Photonic Crystals with Dirac Point in Bandstructure
, M.Sc. Thesis Sharif University of Technology ; Khorasani, Sina (Supervisor)
Abstract
One of the attractive fields of applied quantum mechanics in recent two-three decades is the field of quantum computing. Up to now different substrates have been proposed for a quantum computer. One of them is cavity quantum electrodynamics in which some quantum systems with finite energy states like atoms interact with quantized Bosonic modes like photons inside a cavity. In this dissertation we study a particular structure in this substrate. This structure consists of some quantum dots inside coupled cavities. Since we would like to build these cavities in a photonic crystal slab, we first introduce two new methods for analysis of this type of crystals. These methods are much faster than...
Aeroelastic stability and response of composite swept wings in subsonic flow using indicial aerodynamics
, Article Journal of Vibration and Acoustics, Transactions of the ASME ; Volume 135, Issue 5 , 2013 ; 10489002 (ISSN) ; Farsadi, T ; Haddadpour, H ; Sharif University of Technology
2013
Abstract
In this study, the aeroelastic stability and response of an aircraft swept composite wing in subsonic compressible flow are investigated. The composite wing was modeled as an anisotropic thin-walled composite beam with the circumferentially asymmetric stiffness structural configuration to establish proper coupling between bending and torsion. Also, the structural model consists of a number of nonclassical effects, such as transverse shear, material anisotropy, warping inhibition, nonuniform torsional model, and rotary inertia. The finite state form of the unsteady aerodynamic loads have been modeled based on the indicial aerodynamic theory and strip theory in the subsonic compressible flow....