Loading...
Search for: boroumand--mohammad
0.133 seconds

    Survey on FRID Specifications and Requirements for Using in License Plates

    , M.Sc. Thesis Sharif University of Technology Boroumand, Moosareza (Author) ; Hemmatyar, Mohammad Afshin (Supervisor)
    Abstract
    An RFID (Radio Frequency Identification) device consists of a small and inexpensive microchip attached to an antenna. The chip can be very small and some RFID tags are thin enough to be embedded in paper. RFID are heavily used to track items in production environments and to label items in supermarkets, Hospital, Factory, License plate, Cattle….They are usually thought of as an advanced barcode. However, in this project we argue about RFID license plate and using RFID tags for recognize vehicle from distance. Radio Frequency Identification (RFID) tags has many applications in modern automatic and intelligent identification systems. Vehicles outfitted by RFID tags as License Plates, can be... 

    Acoustic Streaming for Drug Delivery into Brain Tissue

    , M.Sc. Thesis Sharif University of Technology Boroumand, Ahmad (Author) ; Assempour, Ahmad (Supervisor) ; Ahmadian, Mohammad Taghi (Supervisor)
    Abstract
    Cancer is one of the most critical diseases in the last century. Numerous efforts have been conducted to treat cancer. According to the report of World Health Organization, one death of every six deaths is due to this disease. More than 100 cancer types have been identified. Among these types, CNS tumor is one of the most critical cancer types with high mortality (65.9%). Various methods have been applied to treat this disease, but still, treatment efficiency is low. In this thesis, the effect of ultrasound waves on drug delivery into CNS tumors was evaluated using both experimental and simulation devices. A syringe pump was used to inject the drug solution into tissue-mimicking gels (CED).... 

    Effect of Nano Carbon Tube Particles on Fatigue Strength of Composite Polymers

    , M.Sc. Thesis Sharif University of Technology Boroumand Azad, Sima (Author) ; Hosseini kordkheili, Ali (Supervisor)
    Abstract
    By increasing growth of the composite materials and achieving nano-materials and understanding the unique and specific properties, using materials for production with ideal specifications widely spread. So far nano-materials were used for strengthening materials and producing composite and then nano composites were produced.
    Regarding to widespread use of polymer matrix composites, nano particles for reinforcement polymers were used. Thus desirable and unexpected properties were observed in polymer matrix nano composites.
    In this project, due to the unique properties of carbon nano tubes such as high strength and modulus, low density, and high ratio of length to diameter. They are... 

    Evaluating the Effect of E-government on the Relationship between Corruption and Financial Access of the SMEs

    , M.Sc. Thesis Sharif University of Technology Boroumand, Mohammad (Author) ; Najmi, Manoochehr (Supervisor) ; Tasavori, Misagh (Supervisor)
    Abstract
    Corruption is one of the environmental destructive factors, which has a long history among firms. Lots of research has been done regarding the impact of corruption at both the micro and macro levels. Some researchers believe that corruption can have severe negative impacts on the firms and even to the macro-economic level. However, others believe that corruption can act as a tool by which firms can do their stuff more effectively and efficiently. For combating corruption, governments have always taken action. In recent years, by virtue of technological advancements and ICT (information and communication technologies) tools, governments have employed them to reduce the level of corruption. In... 

    Numerical and experimental evaluation of ultrasound-assisted convection enhanced delivery to transfer drugs into brain tumors

    , Article Scientific Reports ; Volume 12, Issue 1 , 2022 ; 20452322 (ISSN) Boroumand, A ; Mehrarya, M ; Ghanbarzadeh Dagheyan, A ; Ahmadian, M. T ; Sharif University of Technology
    Nature Research  2022
    Abstract
    Central Nervous System (CNS) malignant tumors are a leading cause of death worldwide with a high mortality rate. While numerous strategies have been proposed to treat CNS tumors, the treatment efficacy is still low mainly due to the existence of the Blood–Brain Barrier (BBB). BBB is a natural cellular layer between the circulatory system and brain extracellular fluid, limiting the transfer of drug particles and confining the routine treatment strategies in which drugs are released in the blood. Consequently, direct drug delivery methods have been devised to bypass the BBB. However, the efficiency of these methods is not enough to treat deep and large brain tumors. In the study at hand, the... 

    Yield-driven design-time task scheduling techniques for multi-processor system on chips under process variation: A comparative study

    , Article IET Computers and Digital Techniques ; Volume 9, Issue 4 , 2015 , Pages 221-229 ; 17518601 (ISSN) Momtazpour, M ; Assare, O ; Rahmati, N ; Boroumand, A ; Barati, S ; Goudarzi, M ; Sharif University of Technology
    Institution of Engineering and Technology  2015
    Abstract
    Process variation has already emerged as a major concern in design of multi-processor system on chips (MPSoC). In recent years, there have been several attempts to bring variability awareness into the task scheduling process of embedded MPSoCs to improve performance yield. This study attempts to provide a comparative study of the current variation-aware design-time task and communication scheduling techniques that target embedded MPSoCs. To this end, the authors first use a sign-off variability modelling framework to accurately estimate the frequency distribution of MPSoC components. The task scheduling methods are then compared in terms of both the quality of the final solution and the... 

    A continuum constitutive model for mechanical behavior of 5052 resin epoxy containing various percentages of MWCNTs

    , Article Journal of Composite Materials ; Volume 51, Issue 17 , 2017 , Pages 2423-2434 ; 00219983 (ISSN) Hosseini Kordkheili, S. A ; Toozandehjani, H ; Ashouri Choshali, H ; Boroumand Azad, S ; Sharif University of Technology
    SAGE Publications Ltd  2017
    Abstract
    In this article, a continuum-based constitutive model is developed to predict the mechanical behavior of 5052 resin epoxy reinforced by multiwalled carbon nanotubes (MWCNTs) based on experimentally generated data. For this purpose, MWCNTs/epoxy specimens with various percentages of functionalized and nonfunctionalized MWCNTs are prepared. The SEM graphs indicate that functionalization leads to a better bound between epoxy and MWCNTs and a higher level of dispersion. The specimens are then tested under standard ASTM D638-02 a procedure and their true plastic stress–strain curves are extracted. Investigations on experimentally generated data reveal that a wt% dependent equation which is... 

    Drug delivery and adhesion of magnetic nanoparticles coated nanoliposomes and microbubbles to atherosclerotic plaques under magnetic and ultrasound fields

    , Article Engineering Applications of Computational Fluid Mechanics ; Volume 15, Issue 1 , 2021 , Pages 1703-1725 ; 19942060 (ISSN) Alishiri, M ; Ebrahimi, S ; Shamloo, A ; Boroumand, A ; Mofrad, M. R. K ; Sharif University of Technology
    Taylor and Francis Ltd  2021
    Abstract
    The use of external fields such as magnet and ultrasound to enhance the targeted drug delivery (TDD) by nano-microcarriers could be a potential method. In this research, the drug delivery of magnetic nanoparticles (NPs) coated nanoliposomes and microbubbles (MBs) to the atherosclerosis plaque was investigated under magnetic and ultrasound fields in terms of their adhesion to the plaque through ligand–receptor binding. The Halbach arrangement enhanced the surface density of nanoliposomes and MBs adhered to the plaque by ∼ (Formula presented.) and ∼ (Formula presented.), respectively. A focused transducer at the power of (Formula presented.) led to better drug delivery performance and caused ∼... 

    Drug delivery and adhesion of magnetic nanoparticles coated nanoliposomes and microbubbles to atherosclerotic plaques under magnetic and ultrasound fields

    , Article Engineering Applications of Computational Fluid Mechanics ; Volume 15, Issue 1 , 2021 , Pages 1703-1725 ; 19942060 (ISSN) Alishiri, M ; Ebrahimi, S ; Shamloo, A ; Boroumand, A ; Mofrad, M. R. K ; Sharif University of Technology
    Taylor and Francis Ltd  2021
    Abstract
    The use of external fields such as magnet and ultrasound to enhance the targeted drug delivery (TDD) by nano-microcarriers could be a potential method. In this research, the drug delivery of magnetic nanoparticles (NPs) coated nanoliposomes and microbubbles (MBs) to the atherosclerosis plaque was investigated under magnetic and ultrasound fields in terms of their adhesion to the plaque through ligand–receptor binding. The Halbach arrangement enhanced the surface density of nanoliposomes and MBs adhered to the plaque by ∼ (Formula presented.) and ∼ (Formula presented.), respectively. A focused transducer at the power of (Formula presented.) led to better drug delivery performance and caused ∼... 

    Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent

    , M.Sc. Thesis Sharif University of Technology Mohammad Karami (Author) ; Bazargan, Mohammad (Supervisor)
    Abstract
    The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir.... 

    Numerical Analysis of An Annular Gas Turbine Combustor

    , M.Sc. Thesis Sharif University of Technology Gandomi, Mohammad Hossein (Author) ; Farshchi, Mohammad (Supervisor)
    Abstract
    The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

    A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]

    , Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 Sedghi, H. (Haniyeh) ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
    Abstract
    Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network... 

    Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating

    , Ph.D. Dissertation Sharif University of Technology Labbaf, Mohammad Hossein (Author) ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)

    SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers

    , M.Sc. Thesis Sharif University of Technology Omati, Mohammad Mahdi (Author) ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
    Abstract
    During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of... 

    Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet

    , M.Sc. Thesis Sharif University of Technology Mohammadi, Mohammad Ali (Author) ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
    Abstract
    In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms  

    Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach

    , M.Sc. Thesis Sharif University of Technology Makhsousi, Mohammad Hossein (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a... 

    Estimate the Effect of Religiosity on Voter Turnout

    , M.Sc. Thesis Sharif University of Technology Jarrahi, Mohammad Mahdi (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
    Abstract
    The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections  

    Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks

    , M.Sc. Thesis Sharif University of Technology Shokouhi, Mohammad Hossein (Author) ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
    Abstract
    Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to... 

    Non-Scratch, Antibacterial And Self-cleaning SiO2/TiO2 Nano Composite Coating on Surgical Tools By Sol-Gel

    , M.Sc. Thesis Sharif University of Technology Ahmadi, Mohammad Hossein (Author) ; Ghorbani, Mohammad (Supervisor)
    Abstract
    In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
    The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

    Simulation and Control of an Aromatic Extractive Distillation Column

    , M.Sc. Thesis Sharif University of Technology Karima, Mohammad Mahdi (Author) ; Shahrokhi, Mohammad (Supervisor)
    Abstract
    In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all...