Sharif Digital Repository

Multi-site photoplethysmography is an optoelectronic technique that measures changes in blood volume associated with cardiac contraction. Photoplethysmogram (PPG) recording enables researchers to study the vascular and hemodynamic properties of human subjects. Currently, there is no commercial system available in the market to perform multi-channel PPG recording. The measurements can be obtained from fingertips, ear lobes and toes due to their low absorption and high degree of vasculature. The main objective of this project is to develop a suitable data compression algorithm for two-channel simultaneous high resolution wireless PPG recording system. MATLAB software was used during the... 

Nano sized ZnO on TiO 2 spherical core shells were prepared by using hydrothermal method. The particle size of initial TiO 2 was around 20 nm, and the specific surface area was 50 m2/gr. Different ratios of TiO 2 and ZnO applied to synthesize core shell particle. X-ray diffraction (XRD) used to phase characterization and crystalline size, scanning electron microscopy (SEM) to morphology and microstructure investigations. S. Brunauer, P. H. Emmett and E. Teller method (BET) to find specific surface area, Diffusive UV-visible-NIR spectrometry to bang gap calculations. The results indicate that powders with a shell of zinc oxide in specific range have the quantum size effect. Titanium oxide and... 

Risk aversion is a prevalent phenomenon when sufficiently large amounts are at risk. In this paper, we introduce a new prescriptive approach for coping with risk in sequential decision problems with discrete scenario space. We use Conditional Value-at-Risk (CVaR) risk measure as optimization criterion and prove that there is an explicit linear representation of the proposed model for the problem  

Treatment of dye pollution containing C.I. Acid Red 14 (AR14) by a coupled photocatalytic process was studied. Titanium dioxide, in the form of anatase and rutile, and zinc oxide, were used as photocatalysts. The investigated photocatalysts were Aldrich-produced nanopowders with crystallites of a mean size of 20-30 nm and a specific surface area of about 50 m 2/g. A comparison of TiO 2(anatase), TiO 2(rutile), TiO 2(a,r), and ZnO for the decolorization of the AR14 solution was performed. Results showed that color removal followed the decreasing order of TiO 2(a,r), ZnO > TiO 2(a,r) > TiO 2(a), ZnO > TiO 2(r), ZnO >TiO 2(a,r) > TiO 2(a) > ZnO > TiO 2(r). Response surface methodology (RSM) was... 

This article presents a novel identification approach which can deal with nonlinear and time-varying characteristics of complex dynamic systems, especially an aerial vehicle in the entire flight envelope. A set of local sub-models are first developed at different operating points of the system, and subsequently a self-organizing multi-model ensemble is introduced to aggregate the outputs of the local models as a single model. The number of employed local models in the proposed multi-model ensemble is optimized using a novel self-organizing approach. Also, wavelet neural networks, which combine both the universal approximation property of neural networks and the wavelet decomposition... 

L-tryptophan functionalized AgNPs were successfully fabricated using a one-pot synthesis method and assessed as a colorimetric probe for rapid and accurate determination of Mg2+ ions. The developed sensor showed a selective response towards Mg2+ with no interference from Ca2+ in the wide concentration range of 1–200 µM. The sensor's response was optimized in the pH range of 9–10, which can be attributed to the protonation of amine groups and their interaction with Mg2+ ions. The stability and selectivity of the sensor were examined in different salt (NaCl) and other metal ions, respectively. The L-tryptophan-AgNPs sensor detected Mg2+ with the limit of detection of 3 µM, which is way lower... 

To evaluate the propulsion system capabilities of a Flapping Micro Air Vehicle (FMAV), a new aeroelastic model of a typical flexible FMAV is developed, utilizing the Euler-Bernoulli torsion beam and quasi steady aerodynamic model. The new model accounts for all existing complex interactions between the mass, inertia, elastic properties, aerodynamic loading, flapping amplitude and frequency of the FMAV, as well as the effects of several geometric and design parameters. To validate the proposed theoretical model, a typical FMAV, as well as an instrumented test stand for the online measurement of forces, flapping angle and power consumption, has been constructed. The experimental results are... 

The graphitic carbon nitride/tin oxide (g-C3N4/SnO2) nanocomposite synthesized under microwave irradiation was used for adsorptive removal of sulfur-containing dibenzothiophene (DBT) from Tehran vehicular gasoline. High-resolution transmission electron microscopy, X-ray powder diffraction, energy dispersive X-ray spectroscopy, Brunauer-Emmett-Teller, Fourier-transform infrared spectroscopy, and field emission scanning electron microscopy techniques determined the adsorbent characteristics, and gas chromatography with a flame ionization detector determined the DBT concentration of the samples. Application of the experimental data into the solid/fluid kinetic models indicated a chemisorption... 

The geometry structures of hexa-coordinated [NiLX]X complexes (X = Cl -, Br-, I-) {L = 8,9,18,19-tetrahydro-7H,17H- dibenzo[f,o] [1,5,9,13]dioxadiaza cyclohexadecine-8,18-diol} are optimized by density functional theory (DFT) using B3LYP/LANL2DZ. The calculated geometric parameters are in good agreement with the corresponding experimental values. Calculation results about these complexes show that dipole moment decreases, and the energy levels of HOMOs descend from iodo-complex to chloro-complex. The energy levels of HOMOs descend gently from iodo-complex to chloro-complex, while the energy levels of LUMOs in the present complexes are almost similar; therefore the energy gapes between HOMOs... 

The granular activated carbon (GAC) was used as an adsorbent for its ability to remove haloacetic acids (HAAs) from drinking water by batch and column experiments. Various thermodynamic parameters, such as ΔG°, ΔH° and ΔS° have been calculated. The thermodynamics of HAAs onto GAC system indicates spontaneous and exothermic nature of the process. The ability of GAC to adsorb HAAs in a fixed bed column was investigated as well. The effect of operating parameters such as flow rate and inlet HAAs concentration on the sorption characteristics of GAC was investigated. The total adsorbed quantities, equilibrium uptakes and total removal percents of HAAs related to the effluent volumes were... 

Conventional features for speech recognition have not been evaluated in terms of importance in human speech recognition. In this paper a method for extracting important features in an interactive process has been introduced. This method can be used as an aid for experts in an ASR expert system. It has also been shown, as an application of our method, how an expert might find out the distinguishing features between "m" and "n". As another use, it has been illustrated that how our method could be used to check the sufficiency of information in the quantized filter-bank for speech recognition  

The energy supply system of Uzbekistan is not well positioned to meet the rapidly rising domestic energy demand of this country. Uzbekistan's current energy supply system is outdated and has very low diversity, as most of its energy comes from natural gas. In addition to producing immense amounts of greenhouse gas and environmental pollution, this situation is untenable considering the eventual depletion of fossil fuel reserves of this country. Uzbekistan's renewable energy sector is highly undeveloped, a situation that can be attributed to the lack of coherent policies for the advancement of renewable power and the low price of natural gas. However, this country has significant untapped... 

The present work numerically investigates the mass and heat transport flow of micropolar fluid in a channel having permeable walls. The appropriate boundary layer approximations are used to convert the system of flow model equations in ODEs, which are then numerically treated with the quasi-linearization method along with finite difference discretization. This technique creates an efficient way to solve the complex dynamical system of equations. A numerical data comparison is presented which assures the accuracy of our code. The outcomes of various problem parameters are portrayed via the graphs and tables. The concentration and temperature accelerate with the impacts of the Peclet numbers... 

The present work numerically investigates the mass and heat transport flow of micropolar fluid in a channel having permeable walls. The appropriate boundary layer approximations are used to convert the system of flow model equations in ODEs, which are then numerically treated with the quasi-linearization method along with finite difference discretization. This technique creates an efficient way to solve the complex dynamical system of equations. A numerical data comparison is presented which assures the accuracy of our code. The outcomes of various problem parameters are portrayed via the graphs and tables. The concentration and temperature accelerate with the impacts of the Peclet numbers... 

The present work numerically investigates the mass and heat transport flow of micropolar fluid in a channel having permeable walls. The appropriate boundary layer approximations are used to convert the system of flow model equations in ODEs, which are then numerically treated with the quasi-linearization method along with finite difference discretization. This technique creates an efficient way to solve the complex dynamical system of equations. A numerical data comparison is presented which assures the accuracy of our code. The outcomes of various problem parameters are portrayed via the graphs and tables. The concentration and temperature accelerate with the impacts of the Peclet numbers... 

In the present research, the authors have attempted to examine the compressive strength of conventional concrete, which is made using different aggregate sizes and geometries considering various curing temperatures. To this end, different aggregate geometries (rounded and angular) were utilized in various aggregate sizes (10, 20, and 30 mm) to prepare 108 rectangular cubic specimens. Then, the curing process was carried out in the vicinity of wind at different temperatures (5◦ C < T < 30◦ C). Next, the static compression experiments were performed on 28-day concrete specimens. Additionally, each test was repeated three times to check the repeatability of the results. Finally, the mean... 

In this study, corrosion behaviour of porous NiTi modified by plasma sprayed alumina coating has been investigated. Scanning electron microscopy and X-ray diffraction techniques were applied for the morphology and microstructure characterisation, while linear sweep voltammetry and electrochemical impedance spectroscopy were used for investigation of corrosion behaviour of coated and uncoated NiTi specimens. Induced couple plasma was conducted to measure ion release of the specimens in simulated body fluid at 37°C. The plasma sprayed Al2O3 coating on the porous NiTi improved the surface characteristics for biomedical applications. The alumina coating significantly hampered Ni ion release from... 

Pure polypyrrole (PPy), PPy/Al2O3 and PPy/SiO2 nanocomposites synthesized galvanostatically using different polymerization charges. Electrochemical impedance measurements of pure polypyrrole revealed that the film thickness affected the impedance responses. The characteristic frequencies vs. film thickness that obtained using Cole-Cole plots showed that electrodeposition mechanism changed from 3D to 1D after nuclei overlapping for pure PPy. Analysis of the nanocomposites impedance spectrums revealed no changes during the film growth, i.e. deposition continues 3D even after nuclei overlapping. Scanning electron microscopy (SEM) confirmed the impedance results and showed that the morphology of... 

The Karkheh River Basin is one of the Iranian river basins with a high potential for hydropower production. While Iran is actively constructing large dams in the Basin for hydropower production, climate change is putting the future status of hydropower production in the Basin in question. Using MODSIM, sensitivity of the Basin to climate change is investigated by estimating stream flow changes and the resulting impacts on hydropower production for different climate change scenarios. Results indicate considerable reductions in annual and seasonal hydropower production due to the expected dry climatic conditions under the existing operation rules. Findings highlight the necessity for revision... 

Porous NiTi shape memory alloy (SMA) was fabricated by sintering of compressed constituent elements pre-mixed with NaCl or urea spacer holders. Effect of spacer to metal volume-ratio (r S) on shape, size, distribution and openness of the voids was probed by optical metallography, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Differential scanning calorimetry (DSC) was used to determine the SMA transformation temperatures. Controllable void geometry helping osteoblast proliferation and bone cell growth was gained by addition of the spacers. At r S = 0.7, percentage of the open pores reached 52% while at r S = 1.43, interconnected pores with 200 to 500 μm diameter were...