Sharif Digital Repository

Medical images include information about human body which are used for different purposes such as surgical and diagnostic plans. Compression of medical images is used in some applications such as profiling patient's data and transmission systems. Regard to importance of medical images information, lossless or near-lossless compression is preferred. Lossless JPEG, JPEG-LS and lossless version of JPEG2000 are few well-known methods for lossless compression. JPEG2000 is one of the latest and provides good compression ratio, however, it is complex [1]. In real time application which needs hardware implementation, low complex algorithm accelerates compression process. In this paper, a lossless... 

Remote Sensing (RS) images or satellite images include information about earth. Compression of RS images is important in the field of satellite transmission systems and mass storage purposes. Because of importance of information and existent of large amount of details, lossless compression preferred. Real time compression technique is applied on satellite and aerial transmission systems [1]. A simple algorithm accelerates the whole process in real time purposes. Lossless JPEG, JPEG-LS and JPEG2000 are some famous lossless compression methods. Transformation is the first step of these methods. In this paper, a simple and efficient method of lossless image transformation has been introduced by... 

This paper introduces two new compression methods. One of these methods is adaptive and powerful for the compression of hyperspectral data, which is based on separating the bands with different specifications by the histogram analyzes and new version of Binary Hybrid GA-PSO (BHGAPSO) and compressing each one with a different manner. The new proposed methods improve the compression ratio of the JPEG standards and save storage space the transmission system. The proposed methods are applied on different test cases, and the results are evaluated and compared with some other compression methods, such as lossless JPEG and JPEG2000  

Medical images contain human body pictures and used widely in diagnosis and surgical purposes [1]. Compression is needed for medical images for some applications such as profiling patient's data or transmission systems Due to the importance of the information of medical images, lossless or visually lossless compression preferred. Lossless compression mainly consists of transformation and encoding steps. On the other hand, hardware implementation of lossless compression algorithm accelerates real time tasks such as online diagnosis and telemedicine. Lossless JPEG, JPEG-LS and lossless version of JPEG2000 are few well known methods for lossless compression. This paper is focused on the... 

Pitch detection is the process of determining the period of the vocal cords closure or in another word the time duration of one glottal closed, open and returning phase. Dyadic wavelets transform (DyWT) and modified higher order moment, are two pitch detection methods. DyWT is an accurate pitch detection method, however it has less accuracy compared to modified higher order moment. On the other hand modified higher order moment has high computational complexity and is time consuming. The DyWT pitch period detection is based on a two pass dyadic wavelet transform over a signal. Modified higher order moment is based on autocorrelation function (ACF) and in this method the speech signal has... 

Pitch detection is the process of determining the period of the vocal cords closure or in another word the time duration of one glottal closed, open and returning phase. Dyadic wavelets transform (DyWT) and modified higher order moment, which is based on the autocorrelation function, are two pitch detection methods. DyWT is an accurate pitch detection method, however it has less accuracy compared to modified higher order moment. On the other hand modified higher order moment has high computational complexity and is time consuming. In this paper, we propose a pitch detection method based on DyWT which has use modified higher order moment. Modified higher order moment is applied only in some... 

The insect circulatory system contains an open hemocoel, in which the mechanism of hemolymph flow control is ambiguous. As a continuous fluidic structure, this cavity should exhibit pressure changes that propagate quickly. Narrow-waisted insects create sustained pressure differences across segments, but their constricted waist provides an evident mechanism for compartmentalization. Insects with no obvious constrictions between segments may be capable of functionally compartmentalizing the body, which could explain complex hemolymph flows. Here, we test the hypothesis of functional compartmentalization by measuring pressures in a beetle and recording abdominal movements. We found that the... 

In [1], [2] it is shown that the minimum broadcast rate of a linear index code over a finite field Fq is equal to an algebraic invariant of the underlying digraph, called minrankq. In [3], it is proved that for F2 and any positive integer k, minrankq(G) ≤ k if and only if there exists a homomorphism from the complement of the graph G to the complement of a particular undirected graph family called 'graph family {Gk}'. As observed in [2], by combining these two results one can relate the linear index coding problem of undirected graphs to the graph homomorphism problem. In [4], a direct connection between linear index coding problem and graph homomorphism problem is introduced. In contrast to... 

I present an in-depth review of the trends and the directions taken by researchers worldwide in optical code-division multiple-access (OCDMA) systems. I highlight those trends and features that I believe are essential to the successful introduction of various OCDMA techniques in communication systems and data networks in the near future. In particular I begin by giving a comprehensive review of the construction of optical orthogonal codes (OOCs). Specifically I discuss the recently developed algorithms that are based on matrix algebra, which simplify and enhance the efficiencies of algorithms in OOC generation. In communication systems studies I first focus on and discuss various OCDMA... 

In this paper, we analyze the worst-case delay performance of a network of fair queuing servers in case of multiple-paths between source-destination pairs. In order to develop worst-case delay analysis for the multiple-path scenario, two challenging events should be addressed: merging different sub-streams of a session as well as distributing a traffic stream among different paths (traffic partitioning). Specifically, we propose to merge incoming sub-streams of a session to a node according to a limited rate Fair Queuing (FQ) scheme. Although the merged stream is treated as a unity, this approach results in a guaranteed level of service to each sub-stream. In addition, an algorithm is... 

This paper presents an investigation of the effects of tool rake angle and nose radius on the surface quality of ultraprecision diamond-turned porous silicon. The results showed that as rake angle decreases, the high-stress field induced by the tool edge increases, causing microcracks to propagate extensively near the pore walls. As a result, the ductile-machined areas shrank under a negative tool rake angle. On the other hand, brittle fracture occurred around pores released cutting pressure significantly. These trends of rake angle effects are distinctly different from those in the cutting of non-porous silicon. Finite element simulation of stress in the cutting area agreed with the... 

This paper presents an investigation of the effects of tool rake angle and nose radius on the surface quality of ultraprecision diamond-turned porous silicon. The results showed that as rake angle decreases, the high-stress field induced by the tool edge increases, causing microcracks to propagate extensively near the pore walls. As a result, the ductile-machined areas shrank under a negative tool rake angle. On the other hand, brittle fracture occurred around pores released cutting pressure significantly. These trends of rake angle effects are distinctly different from those in the cutting of non-porous silicon. Finite element simulation of stress in the cutting area agreed with the... 

The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23 °C and 100 °C. Basal slip was dominant in the solution treated alloy, while pyramidal slip occurred in the precipitation hardened alloy. Pyramidal dislocations pass the precipitates by forming Orowan loops, leading to homogeneous deformation and to a strong hardening. The predictions of the yield stress based on the Orowan model were in reasonable agreement with the experimental data. The presence of rod-shape precipitates perpendicular to the basal plane leads to a strong reduction in the plastic anisotropy of Mg. © 2020 Elsevier B.V  

The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23 °C and 100 °C. Basal slip was dominant in the solution treated alloy, while pyramidal slip occurred in the precipitation hardened alloy. Pyramidal dislocations pass the precipitates by forming Orowan loops, leading to homogeneous deformation and to a strong hardening. The predictions of the yield stress based on the Orowan model were in reasonable agreement with the experimental data. The presence of rod-shape precipitates perpendicular to the basal plane leads to a strong reduction in the plastic anisotropy of Mg. © 2020 Elsevier B.V  

This research explored the influences of shielding gases on the appearance of weld beads and the microstructures and mechanical properties of thin-wall samples using conventional gas metal arc welding as the heat source by using 5356 aluminium alloy welding wire as the raw materials and nitrogen (N2) and argon (Ar) as the shielding gases. The results showed that under the same parameters and after mono-layer single-bead welding was performed using N2 as the shielding gas, the bead height was higher, the bead width was narrower, and the penetration depth was shallower. The grain size of the thin-wall sample protected by N2 was 43.5–47.8 % smaller than that obtained under Ar protection.... 

In this paper, we describe a carbon dioxide mineralization process and its associated solid products. These solid products include amorphous silica, iron hydroxides and magnesium carbonates. These products were subjected to various characterization tests, and the results are published here. It was found that the iron hydroxides from this process can have different crystalline properties, and their formation depended very much on the pH of the reaction conditions. Different forms of magnesium carbonate were also obtained, and the type of carbonate precipitated was found to be dependent on the carbonation temperature. Hydromagnesite was obtained mainly at low temperatures, while dypingite was... 

Employing a proper pulse shaper in the conventional split Hopkinson pressure bar (SHPB) test helps to achieve dynamic equilibrium condition and to fulfill a constant strain rate condition in the test specimen. To this end, the parameters affecting the incident pulse shape, i.e., pulse shaper thickness, pulse shaper diameter, striker bar length and striker bar velocity are experimentally studied. Moreover, simulation results, validated by experimental data together with wave propagation analysis, are exploited to provide general guidelines to properly design a pulse shaper. It is recommended to use a relatively large diameter pulse shaper for testing work-hardening materials. Also, for... 

In this work the effects of backwash pressure, duration of acid and sodium hydroxide backwashing, sodium hydroxide concentration, and the duration of forward washing on performance of permeate flux recovery (PFR) were investigated. A two-level fractional factorial design (FFD) was used to design the experiments. The ability of back propagation neural network (BPNN) and radial basis function neural network (RBFNN) in predicting the performance of cleaning-in-place (CIP) of hydrophilic polyethersulfone (PES) membrane were investigated. It is found that BPNN has better ability in predicting the PFR performance than RBFNN. The best architecture of BPNN was a network consisting of 1 hidden layer... 

Distant, dusty and extremely luminous galaxies form a key component of the high redshift universe, tracing the period of intense cosmic activity that ultimately gave rise to the present-day universe. These highly luminous galaxies, first detected in the ground-based submillimeter region, are however optically very faint, which hampers identification of the optical counterpart and the measurement of a redshift. We are developing a new direct-detection submm spectrograph DESHIMA. By taking advantage of the rapidly advancing technology of superconducting microresonators, DESHIMA will revolutionize the appearance and capabilities of a submm spectrograph. There will no longer be large grating...