Sharif Digital Repository

Asphaltenedeposition is a major problem during natural depletion and EOR processes due to formation damage issues. It is necessary to reveal asphaltene deposition mechanisms and its effective parameters to prepare an acceptable prevention strategy. Therefore, different natural depletion and EOR experiments must performed on core samples. In this research, Effect of CO2 injection on asphaltene deposition phenomena has been surveyed. Two carbonate core samples and one sandstone core sample was used in experiments. The oil used in these experiments was recombinedoilfrom one of Iranian offshore oilfield.In order to estimate permeability reduction during experiment, injection of oil and CO2 was... 

Among probable hazards in chemical industries: vapor cloud explosion (VCE) is one of the worst and most destructive ones. More than half of the major process inci¬dents, according to the statistics, are VCEs. VCE causes the most serious consequences; therefore, it attracts many attentions to itself. Accordingly, plenty of researches have been done for the purpose of protection against VCE effects. All efforts in this field can be categorized in two different main activities; firstly, prescribing safety distances between groups of hazardous equipment and vulnerable areas, secondly, using facilities which reinforce vulnerable areas against explosion blasts. Regardless to which category is... 

There are different well-established strategies for making a process plant inherently safer. The benefits of applying these strategies on reducing the overall risk inside a plant are obvious. However, some of these changes are rejected many times because they appear to be too costly. But if the effects of applying inherently safer design strategies are investigated not only on the processing costs of a plant but also on the potential accident costs, the decision would in fact be different. In this paper an optimization procedure is proposed which integrates both processing and accident costs for different design schemes. In this procedure, some of the design variables are chosen with regard... 

Today, Quantitative Risk Assessment (QRA) has become an efficient tool in decision making for safety and process experts. To assess the risk of any accident scenario, it is necessary that the probability of that event be determined in addition to estimating the probable consequences. Event tree and fault tree analysis are known to be the standard tools for calculating the frequency of incident outcomes.
In this research, a new method based on Markov chin and Fuzzy theory is presented to estimate the occurrence probability of events. A one of important parameter which has sufficient effect on probability of incident frequency, is inspection and maintenance interval. in this research... 

Inherently safer design is the new approach to maximize the overall safety of a process plant. This approach suggests some risk reduction strategies to be implemented in the early stages of design. There are different well-established strategies for making a process plant inherently safer. The benefits of applying these strategies on reducing the overall risk inside a plant are obvious. However, some of these changes are rejected many times because they appear to be too costly. But if the effects of applying inherently safer design strategies are investigated not only on the processing costs of a plant but also on the potential accident costs, the decision would in fact be different. In this... 

Multi-disciplinary design optimization (MDO) of a surface to air flying vehicle has been done in this research, on the basis of flight simulation. The MDO problem have five disciplines consists of aerodynamic, propulsion, guidance, control, and fire control. Multiple campaign scenarios are defined. The MDO problem has 31 design variables and two objective functions. The objective functions are flying vehicle weight and miss distance. A new meta-heuristic algorithm has been designed to solve multi-objective optimization problems. The new algorithm has been called Multi-objective Adaptive Real-coded Memetic Algorithm (MARCOMA). The MARCOMA can solve large-scale and multi-objective problems and... 

Emergency Shut Down systems are considered as one of the prominent protection layers in industries. In the situation that the process variables exist acceptable limits, the SIS brings the process in a safe state. According to standards, separate design and operation have been defined for BPCS and SIS. In this research, safety issues related to one of the gas refinery unit has been investigated. In fact, the unit does not have shut down system and all the safety loops are defined as DCS. In the first step, the Safety Integrated Levels of the loops which must be defined in shut down system have been specified by using Modified Calibrated Risk Graf. In next step, philosophy of shut down levels... 

Supply chain as one of the most important and critical parts of the production process; could have significant effect on efficiency and productivity of the firms.Integration of supply chain (components from upstream to downstream of production system) has been recently noticed and considered remarkably since it could have a considerable impact on functional variables in supply chain systems such as: cost reduction, responsiveness, service level and decision making process. On the one hand, in the last decade, new trends in global economics and the ongoing pattern in multinationals to outsource their manufacturing process have made the integration process challenging and difficult. On the... 

The 6DOF modelling and robust attitude control of two tethered satellites using tether tension moments is studied in this thesis. In this regard, the coupled rotational and translational dynamics of two satellites connected by a tether in the presence of Earth’s gravitational perturbation, aerodynamic drag, solar radiation pressure and third body effects (Sun and Moon) and also uncertainties in some of physical parameters of system and sensor’s outputs is modelled. Moreover, the tether attachment point to the satellites is different from their center of mass and its effect on dynamics of the system is taken into consideration. Then, the attitude of both satellites are controlled using robust... 

The seasonal fluctuations in economics variables relate to the different behavior of economic agents across different seasons. In past, seasonality has been viewed as a redundant feature that needs to be removed from data before economic analysis. From 1988, modeling seasonality has become the major concern of many economists; moreover, it was seen that many economic analysis and forecasts could be flawed if seasonality is ignored. In the present research, periodic times series approach is used for the first time in modeling the seasonality feature of the housing market. Regarding the importance of the housing sector in economy from micro and macroeconomic points of view, using a more... 

Time series of asset returns display specific regularities such as bell-shaped distribution, leptokurticity and volatility clustering. Economists have made continuous efforts to develop models that explain these patterns and can be used to predict the return and the risk of holding an asset. These efforts can be classified into 3 eras: Bachelier Era (1900-1960) in which the random walk model was developed for speculative prices. Mandelbrot Era (1960-1980) in which the normality assumption was replaced with the Pareto-Levy family of distributions which are flexible enough to justify leptokurticity and infinite variance. And finally, the Dynamic Volatility era in which the focus was on... 

Fire is the most likely type of process accident which occurs in industrial plants. Among all different types of fire, pool fire is the most frequent one, so there are extensive researches done about pool fire. One of the research areas that has drawn a lot of attention in recent years, is pool fire modeling. Results obtained from fire modeling are quite applicable in different fields of safety engineering such as Quantitative Risk Assessment (QRA) or fire proofing studies of process equipment. But fire modeling is an inherently complex process. Because there are several aspects involved such as multi-phase flow, turbulent mixing, combustion and different mechanisms of heat transfer. This... 

The continual deterioration and insufficient strength of reinforced concrete (RC) structures has been a vital problem in the field of civil engineering such an extent that traditional methods of strengthening found to be inconvenient. Nowadays by increasing demands for retrofitting of structures, it necessitates the application of efficient, inexpensive and unobtrusive methods of strengthening. Common way on retrofitting was to use of steel plates externally bonded to RC members. Although this technique has proven to be reasonably effective, it has several distinct disadvantages such as susceptibility of the steel plates to corrode and the excessive weight of steel plates when used in... 

The release of toxic materials causes tragic accidents every year. There are various techniques in order to mitigate the release effect of these materials such as Application of air jets, steam curtains and water curtains. In this study first, previous works are reviewed in order to select the best technique for the mitigation of heavy toxic gas release. Then CFD modeling is used to simulate this technique.
A field situation in which chlorine gas was released upwind of water spray was simulated using the open-source software FDS (Fire Dynamic Simulator), a CFD model. Only mechanical effects of water sprays are considered; hence the effect of absorbtion is neglected. Finally tha... 

Domino accidents are one types of incidents that lead to irreparable damage to industrial units. Since the consequences of such incidents are far more than the first level incident, consideration of this issue and the provision of appropriate strategies for identifying and evaluating this type of incident is very important. Major efforts have been made in the area of process safety is in risk assessment and identify possible scenarios and their probability of occurrence, and have not addressed the financial consequences of an incident. In this research, an algorithm has been developed to estimate the financial losses incurred with an industrial unit due to a domino incident and various...