Sharif Digital Repository

Polymer/layered silicate nanocomposites are good candidates to improve polymer matrices due to enhanced interfaces between nanoclay reinforcement and matrix. So many attempts has been done to improve fabrication methods of these nanocomposites. Polypropylene is a common used engineering material in many industrial applications (general and special). So there is many researches focused on PP/Clay nanocomposites. In this research we tried to investigate the role of clay loading, compatibilizer loading and processing sequence on clay delamination and layer dispersion. We used a blend of two different PPs with different MFI values as matrice. It seems that the blend achieves acceptable... 

In fractured reservoirs under the gravity mechanism, the oil transfer between the matrix blocks is affected by mechanisms such as capillary continuity or re-imbibition. Capillary continuity between adjacent matrix blocks can be created by formation of liquid bridges, or physical contact of surfaces due to the roughness of the fracture wall surface.Since the presence of liquid bridges can be effective in creating capillary continuity and therefore the amount of oil production, the study of the presence of liquid bridges between matrix blocks and how they change in terms of volume and shape in the process of oil and gas movement is of particular importance. Although there are studies on the... 

Depending on the geometry and nozzle pressure, increasing the ratio of the diffuser inlet area to the nozzle outlet area can lead to instability in the high-altitude simulator vacuum chamber startup process. This instability results in the formation of harmonic pressure oscillations throughout the diffuser and the vacuum chamber. In this study, a scaled down second throat diffuser with compressed air has been utilized. The performance of the diffuser has been investigated using four conical nozzles with different expansion ratios to simulate instability at area ratios of 1.27, 1.91, 4.1, and 7.81 with rapid nozzle pressure rise. Experiments were conducted by measuring wall pressures along... 

Endurance Time Method (ET) is a dynamic analysis based on the Time History Analysis in which a predefined intensifying excitation would be applied to the structure and then the performance of the structure would be assessed based on the maximum time that the structure could fulfill the predefined criteria. This method has less complications than the other ordinary Time History methods and decreases the calculations. This method could be applied to Seismic Isolated Structures. Seismic Isolation is a method for decreasing seismic response of structures without increasing strength and ductility of the structure. In this Method all or parts of the structure would be separated from the ground... 

Purification of waste water containing metal ions, is one of major environmental problems which have threaten human’s life, other creatures and even agricultural products by means of polluting suberranean water. Copper ion is one of dangerous heavy metals that exists in potable water and agricultural uses, due to serious problems in health of humans and aquatic. In recent years, different methods for purification of waste water containing heavy metal ions have been published. Right now, thorough these methods such as: filtration, coagulation, precipitation and adsorption are being used, which have their own advantages and disadvantages.In this research, new method for purification of waste... 

Heartbeat is the result of contractions of over 10 billion cardiac cells. These cells’ cytoplasms are connected to each other by gap junctions which are arrays of intercellular protein channels. Thus action potential can propagate from one cell to another and cause its contraction. In core-conductor model, one-dimensional microscopic representation of cardiac tissue, cells are attached to each other to form a ladder network. The parallel elements are connected to each other by series resistors which represent gap junctions. These resistors are nearly always considered as static elements. In this thesis I have investigated the effects of incorporating the dynamicity of gap junction resistors... 

In this research we study multi-commodity inventory-location problem under disruption risk that is formulated to a nonlinear integer-programming model. The objective function of this model is minimization of inventory and location costs simultaneously under disruption risk. These disruptions may be caused by natural events such as earthquake, flood, fire and man-made sources like labor strike or terrorist attack. The structural design of a supply chain greatly affects how these kinds of disruption risks influence the network. In this regard, this study proposes a strategy to reduce the impacts of disruption risk by considering substitute commodity in the multi-commodity inventory-location... 

The aim of this investigation is the experimental study of nozzle exhaust jet flow effects on aerodynamic behavior of an air vehicle at transonic speeds. For this sake, a secondary jet injection is used by the ejector into test model. The ejector total pressure for jet injection varies between 0 (jet off) to 4 bar for simulating nozzle exhaust jet flow and supplying intake’s required mass flow rate. All tests were conducted at QRC Trisonic wind tunnel and at Mach number of 0.5 to 0.85 and angles of -4 to 6 deg. The aerodynamic force and pressure results were recorded in order to analyze the exhaust jet flow. This study revealed that the aerial vehicle drag becomes bigger than its free flight... 

This study aims to evaluate aerodynamic coefficients of an airplane with air breathing engine experimentally. In these experiments, an ejector is used to better simulate flying conditions and aerodynamic interferences generated in inlet and exhaust engine. Therefore, at first, an ejector was designed for simultaneous simulation of exit cold flow and inlet flow of engine. All tests were conducted at QRC Trisonic wind tunnel and at Mach number of 0.5 to 0.85, angles of -4 to 6 deg. and for various amounts of pressure ejector and control surfaces angles. Finally, for the Mach number of 0.5, effect of roughness on the aerodynamic coefficients was examined. The results showed that, drag... 

Bracing Systems are usually a set of inclined members that are embedded in structures to resist lateral forces and control lateral displacements. There are different types and behaviors for Bracing Systems depending on the way of assembling and locating them in the structure. Braced Frames, such as Concentrically Braced Frames (CBFs), generally have high stiffness and low ductility. Another Type of Braced Frames is Eccentrically Braced Frames (EBFs) which improves CBFs by establishing suitable ductility as well as stiffness. Inelastic behavior of Links involved with EBFs caused this in EBFs. Nevertheless, these systems have no efficiency in next earthquake, because links are parts of beams... 

High-altitude simulation lab of chemical thrusters is one of the most important infrastructures for the development of space thrusters technology. In these laboratories, different sections are designed according to the requirements for simulation of the thrusters at specific pressure and temperature. The purpose of this research is to design a subset of the creation and preservation of vacuum for the purpose of ground testing of chemical thrusters. Vacuum preservation is more comprehensive than the vacuum creation and is usually the bottleneck of design, so the design of this subset is intended in the present study. To illustrate this, after introducing the basic concepts required, two... 

Inlets must decelerate the air with lowest loss and drag together with a given pressure and Mach number with best quality and uniformity to the engine. This is done based on flight Mach number, by an arrangement of shock waves and surfaces gradient in the inlet. Any distortion in the flow field and the inlet geometry parameters may disrupt such arrangement and influence on the inlet performance, in addition, under critical conditions, it might affect the stability of the intakes. Any distortion in the flow field and the inlet geometry parameters may disrupt such arrangement and influence on the inlet performance, in addition, under critical conditions, it might affect the stability of the...