Sharif Digital Repository

SAPO-34 zeolite-like particles were successfully synthesized at high temperature environment. An L9 orthogonal array of the Taguchi method was implemented to investigate the effects of experimental conditions to prepare SAPO-34 with respect to crystallinity of the final product phase. The results showed that the favorable phase crystallinity was improved by increasing the hydrothermal synthesis temperature and organic template content, whereas increasing the water content in synthesis mixture decreased the crystallinity. No significant changes in crystallinity of the final products were observed by increasing the synthesis duration. In addition, zeolite SAPO-5, which was formed as the... 

Decreasing particle size results in larger increase of external surface area and shorter diffusion path, both reducing mass and heat transfer resistances in catalysis and sorption. A rapid high-temperature hydrothermal synthesis method was developed to synthesize uniform nanoparticles of SAPO-34 zeolite with high crystallinity. To investigate the effects of temperature and synthesis time on purity and crystallinity of the final products, the crystallization temperature was increased from 468 to 673 K while the synthesis time was decreased from 24 h to 45 min. The products were characterized by XRD and SEM techniques. It was found that high temperature and short synthesis time reduce the... 

Connected and Autonomous Vehicles (CAVs) are introduced to improve individuals' quality of life by offering a wide range of services. They collect a huge amount of data and exchange them with each other and the infrastructure. The collected data usually includes sensitive information about the users and the surrounding environment. Therefore, data security and privacy are among the main challenges in this industry. Blockchain, an emerging distributed ledger, has been considered by the research community as a potential solution for enhancing data security, integrity, and transparency in Intelligent Transportation Systems (ITS). However, despite the emphasis of governments on the transparency... 

In this paper, we design a dimming compatible visible light communication (VLC) system in a standard office room according to illumination standards under channel constraints. We use overlapping pulse position modulation (OPPM) to support dimming control by changing the code weights. The system parameters such as a valid interval for dimming together with an upper bound for bit rate according to the channel delay spread are investigated. Moreover, considering the dispersive VLC channel and using Monte Carlo (MC) simulations, a method is proposed to determine the minimum code length in different dimming levels in order to achieve a valid bit error rate (BER). Finally, trellis coded modulation... 

In this paper, we design a dimming compatible visible light communication (VLC) system with asynchronous and optimum indoor positioning method in a standard office room in combination with asynchronous and optimum indoor positioning method according to illumination standards under channel constraints. We use overlapping pulse position modulation (OPPM) to support dimming control by changing the code weights. The system parameters such as a valid interval for dimming together with an upper bound for bit rate according to the channel delay spread are investigated. Moreover, considering the dispersive VLC channel and using Monte Carlo (MC) simulations, a method is proposed to determine the... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...