Sharif Digital Repository

Nowadays, deliberate or unwanted fire incidents have created much attention to the behavior of structures against these types of events. Since the properties of structural members are influenced by the increase in the temperature of the members, it is more difficult to predict the general and local behavior of the structures during the fire. In this research, a method has been proposed to calculate the critical temperature in two-dimensional structures at its collapse with desirable accuracy. In this process, the upper-bound theory of plastic analysis is used. The plastic analysis is performed by applying the initial fire scenario to the structure, and its collapse load factor with the... 

Nowadays, deliberate or unwanted fire incidents have created much attention to the behavior of structures against these types of events. Since the properties of structural members are influenced by the increase in the temperature of the members, it is more difficult to predict the general and local behavior of the structures during the fire. In this research, a method has been proposed to calculate the critical temperature in two-dimensional structures at its collapse with desirable accuracy. In this process, the upper-bound theory of plastic analysis is used. The plastic analysis is performed by applying the initial fire scenario to the structure, and its collapse load factor with the... 

By increasing the penetration level of the combined heat and power systems and demand response programs between energy consumers in the distribution network, the interaction between electricity and the natural gas network becomes more complicated. This paper proposes a peer-to-peer (P2P) energy sharing scheme for energy trading among Smart Energy Hubs (S.E. Hubs) which can trade both electrical and thermal energy with each other to reduce their cost and, reduce their dependency to gas and electricity utility companies. A two-stage energy strategy is presented. In the first stage, the S.E. Hubs total social cost is reduced by finding the optimal energy sharing profiles. And, in the second... 

Many important public buildings have suffered significant damages due to terrorist attacks in the last few decades. This paper investigates the behavior of structures with steel plate shear wall lateral load resisting system under various blast loadings. A number of twenty steel frames with different heights and widths subjected to four different blast scenarios are modeled and analyzed in opensees software. The results showed that structures with steel plate shear wall systems subjected to blast loading have better behavior in high-rise structures than in low-rise structures in terms of drift and ductility ratio. The steel plate shear wall system exhibited shear-dominated,... 

Selling correlated products faces the sellers with the cross-selling, which is a key factor in managing revenue and costs of the sellers. Cross-selling is a phenomenon which happens when the demands of products are correlated so that the demand for one of the correlated products automatically initiates demand of another. In these cases, different selling tactics such as bundling, tying, mixed bundling, etc. are applied to sell the items. In this paper, an integrated pricing-inventory model for two complementary products under three selling strategies is developed. In the first model, it is assumed that the seller sells the products separately while those are packed and sold as bundling in... 

Selling correlated products faces the sellers with the cross-selling, which is a key factor in managing revenue and costs of the sellers. Cross-selling is a phenomenon which happens when the demands of products are correlated so that the demand for one of the correlated products automatically initiates demand of another. In these cases, different selling tactics such as bundling, tying, mixed bundling, etc. are applied to sell the items. In this paper, an integrated pricing-inventory model for two complementary products under three selling strategies is developed. In the first model, it is assumed that the seller sells the products separately while those are packed and sold as bundling in... 

Platinum nanowires (PtNWs) were electrodeposited on the polycarbonate templates (PCTs) in aqueous solution of H2PtCl6 in triply distilled water. Nanowires with diameters of 50 and 100 nanometers were electrodeposited on the same condition. The kinetics of electrodeposition process was studied by electrochemical techniques such as voltammetry and chronoamperometry methods. Increasing the scan rate, the peaks shifted to more negative potentials and the current density also increased in each peak which was typical for a diffusion-control process. The potential range for the deposition of platinum nanowires was specified and consequently the potentiostatic i-t transients were utilized to produce... 

Optimization of a structure refers to a design procedure that results in the most economical structure in terms of materials and sizing of sections. In structures with steel plate shear walls, finding the best layout of the walls in a frame is also of priority in designing a structure with the minimum weight. Finding the least weight of a structure while all design provisions according to codes and standards are satisfied is a challenging task that is hard to perform with the existing design methods. Metaheuristic optimization algorithms are robust computational tools used for solving complex problems, which are used widely in many engineering fields, especially structural engineering. This... 

In this work, we implement some analytical techniques such as the Exp-function, Tanh, and extended Tanh methods for solving nonlinear partial differential equation, which contains sine terms, its name Double Sine-Gordon equation. These methods obtain exact solutions of different types of differential equations in engineering mathematics  

A variational theory (VT), in which the potential energy of a real system is evaluated relative to the hard-sphere system, was used to investigate the medium's effects on the pair potential parameters. By adding the medium's effects to the isolated pair potential, the concept of an 'effective pair potential' (EPP) was introduced. The EPP parameters were compared with those of the average effective pair potential (AEPP) for Ar, which showed the importance of the medium effects and the long range interactions of the AEPP in dense fluids. The study showed that the depth parameter of the AEPP is much larger than that of the EPP  

Inclusion of nano-clays into hydrogels is an efficient approach to produce nanocomposite hydrogels. The introduction of nano-clay into hydrogels causes an increase in water absorbency. In the present work, Nanocomposite hydro-gels based on kappa-carrageenan were synthesized using sodium montmorillonite as nano-clay. Acrylamide and meth-ylenebisacrylamide were used as monomer and crosslinker, respectively. The structure of nanocomposite hydrogels was investigated by XRD and SEM techniques. Swelling behavior of nanocomposite hydrogels was studied by varying clay and carrageenan contents as well as methylenebisacrylamide concentration. An optimum swelling capacity was achieved at 12% of sodium... 

The performance of OFDM-based Wireless Local Area Networks (WLANs) is investigated by employing different smart antenna techniques at the receiver. The use of multiple antennas at the Access Point (AP) receiver in IEEE802.11a standard-compliant Single Input Multiple Output (SIMO) configuration, improves the physical layer performance in different channel scenarios and interference that may arise from other stations sharing the same frequency band. For this purpose, a comparative study of smart antenna architectures for IEEE802.11a WLAN system using pre-FFT and post-FFT array processing techniques is presented. Simulations are performed on a new model for IEEE802.11a system using a... 

γ-Alumina is used to catalyze the Cannizzaro reaction in the absence of any base under microwave irradiation in high yields. In the case of terephthalaldehyde the reaction is carried out with high selectivity  

In the present work, specimens were cut out from St-37 plates with 19 mm thickness. The thickness of plates was reduced to 12.5 mm by milling and grinding operations. Then a standard V-shaped fillet was made on one edge of the plates. Two plates were butt-welded by standard metal arc gas (MAG) welding process. Residual stresses induced by welding were measured on 20 specimens by centre hole drilling. Load controlled axial fatigue tests were carried out to determine the fatigue life of specimens. Crack growth rates were obtained from experiment. Fractography of specimens was performed. Genetic Algorithm (GA) was employed for prediction of residual stress value in weldments using the crack... 

The qualitative effects of residual stress parameters on fatigue crack growth are investigated using Monte Carlo probabilistic analysis technique. These parameters include the maximum residual stress,σ0, half-width of the tensile residual stress region, b, and the redistribution of residual stress parameter, β. A normal distribution is assumed for all parameters considered in the investigation and fatigue life is determined using Forman equation. The results indicate that: (i) fatigue life decreases nonlinearly if the mean of random maximum residual stress and the half-width of tensile residual stress region increases; (ii) fatigue life increases nonlinearly if the rate of residual stress... 

In this paper residual stresses induced by butt metal arc gas welding (MAGW), in accordance with ASTM E837, are determined by hole drilling. The results are analyzed by probabilistic methods. Also, the effect of fatigue life on relaxation of welding residual stress is investigated. The specimens are tested to measure fatigue life and crack growth rates in accordance with ASTM E466 for force controlled amplitude axial fatigue testing. © 2008 Verlag Stahleisen GmbH, Düsseldorf