Sharif Digital Repository

The architecture of a software system, its elements and the way they interact is a valuable treasure for understanding the system. If architecture description of a system is not available, working on its extraction and reconstruction should be done. For a software with huge size and vast complexity, architecture extraction by hand and without any predefined method is nearly impossible. So, it is essential for software architecture extractor to use a framework and a well-defined process related to it, for extracting the software architecture. It can help him to use automated tools as much as possible in addition to havingauniquelogicalstructureforperformingthearchitectureextractionprocess. In... 

Considering connections as ideally rigid or pinned is a common assumption during design and analysis of steel moment frames. However, in real world, steel connections show a non-linear behavior between these two ideal states. The aim of this research is to investigate the effect of partially restrained connections on the design and performance of two-dimensional steel moment frames under vertical and horizontal loads that are applied statically. For this aim, nonlinear finite element modeling is used in probabilistic evaluation process to assess the performance of existing structures. To capture the real behavior of structure in models, geometric and material sources of nonlinearity are... 

Automatic traffic incident detection is one of the most important areas in intelligent transportation systems. In recent years big cities have faced major problems with traffic flow and congestion. Therefore, real time traffic monitoring in order to analyze traffic flow plays a key role in solving traffic problems. The purpose of this study is to design an integrated system for automatic traffic incident detection and traffic monitoring based on deep learning with vehicle detection and classification, counting, average speed estimation, extracting traffic parameters such as congestion level and event detection such as unauthorized stops and deviation from the path. In this research, a... 

Reactive market power assessment is an important issue for ISOs and the regulators of the reactive power market. Due to the localized characteristics of reactive power as a technical support and its monopsonistic nature as an economic commodity, a vivid reactive market power index including market share, demand side and cost is not achieved yet. In this work, the existing market power indices in simple commodity markets and power markets are reviewed. Then the applicable indices to reactive power are introduced. Then, a new reactive market power index is presented which is based on bidding strategy deviation of the GENCOs in two types of simultaneous reactive markets. Considering its... 

Keratoconus is a progressive corneal illness that appears due to reduced thickness of cornea in some area. Normal cornea has semi sphere shape with uniform thickness from center of cornea to the limbus. However, keratoconic cornea’s shape becomes conic. One of the treatments in moderate state of keratoconus is implantation of IntraStromal Corneal Ring Segments( ICRS). Ring Segments are made of PMMA and inserted in 0/7- 0/8 of depth of cornea.In this study, before surgery data from 3 patient’s cornea images were prepared in order to 3D modeling of cornea, for importing to FEM software( ABAQUS). Material properties of cornea is considered hyperelastic second-order Ogden Model; elastic... 

The most important researchers’ purposes in superconductivity are achievement of the room temperature superconductivity and to understand the high temperature superconductivity mechanism. Researchers’ goal in to increase the transition temperature by applying pressure, changing oxygen content, different doping, and changing stoichiometry in the families of the high temperature superconductors. In this research, which has been carried out in the Magnet Research Laboratary of Sharif University of Technology, samples of Y3Ba5Cu8O18, Gd3Ba5Cu8O18, and Pr3Ba5Cu8O18 have been synthesized by the standard solid-state reaction technique, the structure, electrical and magnetic properties of the... 

In this study, the viability of handling flue gas streams as a source of CO2 for the thermocatalytic conversion was investigated as a CO2 emissions reduction strategy and an intermittent energy storage solution. A transient mathematical model for dynamic catalyst deactivation was validated with experimental results and then used to study HEX membrane reactor. A simulation-based study of novel Sabatier reactor configurations was performed to study the effect of distributed H2 supply on Ni-based catalyst deactivation and to optimize the production of CH4. First, a heat-exchanger type, actively cooled Sabatier reactor is analyzed using a transient mathematical model to assess its feasibility.... 

In this research, a dashboard has been developed to support decision-making in the integration of freight companies. Freight companies usually consist of a limited number of vehicles due to the high cost of vehicles, while the fixed costs of a freight company constitute a significant part of that company's total cost. Therefore, if these companies are merged, their total cost will be substantially decreased. Moreover, under particular demand levels, the integration of freight companies reduces the mileage, travel time, and the number of required cars. Therefore, the integration of freight companies not only reduces fixed costs but also reduces other costs including greenhouse gas costs by... 

Rapid growth of technology and the increase in availability of fast communication means caused transportation planners to pay attention to solutions of demand management with an aproach to information technology. Replacement of traditional shopping with internet shopping can be seen as a suitable solution to reduce traffic and polution. Purpose of this research is to probe teleshopping choice and the frequency of doing that, simultaneously, using copula model as the most common aproach of joint models in recent years. In this research, the binary logit model is used to build the model for teleshopping choice and the order logit model is used to build the frequency model. The data sample is... 

Identifying the success factors of construction projects is one of the most important issues in project management. Lack of sufficient and comprehensive knowledge of project success factors makes it difficult to control, monitor and operate projects. Therefore, identifying the factors influencing the failure or success of projects according to the type of projects by managers, employers and executives can provide a good framework for evaluating and reviewing project outputs for them. Also, recognizing the success factors of projects can help to manage the appropriate allocation of resources throughout the life of the project. The result of this study can increase the existing knowledge about... 

In this thesis, a cellular model of electroporation process and its detection by ultrasound signals is proposed. Electroporation is permeabilization of the cell membrane, caused by an external electric field. The resulted pores open cell’s membrane to large or hydrophilic molecules. The process of Electroporation has been used in Gene therapy and treatment of solid tumors. In this project, first we made a phantom of electroporated tissue and a phantom of normal tissue and then we simulated their responses to a linear array ultrasound transducer. By comparision of received signals from phantoms the probable effect of electroporation on ultrasound RF signals revealed. Results show up to 5 %... 

Petrochemicals, refineries and power plants are among the biggest water-consuming industries. Of all systems in mentioned complex, most water is consumed in the cooling tower system, of which the feed water of the cooling tower accounts for the largest portion of water demand. Drainage loss (blowdown) which constitutes the biggest portion of the feed water losses, varies greatly with changes in source water quality and cooling water treatment. Scarcity of water, large quantities of cooling tower blowdown water and increasing of water price lead to activities for blowdown water treatment to reuse. In this project two pre-treatment methods and two final membrane treatment methods were... 

This work presents the methodology to investigate Optimum Camera Installation Angle (OCIA)while employing the so called?Vision Based Navigation (VBN)? in urban areas.The approach is suitable for future general aviation aircraft as envisioned in Small Air Transportation System (SATS) as well as Unmanned Aerial Vehicles (UAV).Due to practical constraints, the work is limited to the maneuvers in the vertical plane while conducting Simultaneous Localization and Mapping (SLAM) technique.This technique was originated in robotics and is commonly used to guide both ground based and low speed aerial robots in unknown environments involving different types of obstacles. A variety of camera... 

HTGRs are considered as 4th generation reactors which have prominent characteristics such as inherent safety, lower safety costs, High efficiency and high temperature applications. the most important challenges in developing these reactors is providing appropriate codes in design, simulating their performance and analysis of them. In this thesis, a japanese prismatic HTTR reactor has been selected as a reference reactor and the neurotic’s calculations implementation studied at cold zero power (CZP) and hot full power (HFP) states using DRAGON cell calculation codes and DONJON core computations. At CZP state, One group and two group radial & axial flux distribution, control rod critical... 

Bearing capacity of piles depends on many factors among which geometrical properties of piles, soil type, and strength properties of soil are of great importance. Based on these parameters, several approaches have been developed in order to overcome the uncertainty in the prediction of pile bearing capacity. Studies carried out in this area or research can be divided into two main categories: first, laboratory based approaches, and second, numerically based approaches. The research followed in the present study is based on numerical modeling. In this study, a single pile is initially modeled in the axisymmetric configuration and its bearing capacity is determined. The results of the model... 

Today, public-private-partnership (PPP) contracts are attracting attention of both public and private sectors. In these contracts public sector benefits from private sector’s money to overcome its budget limitations. It speeds up pace of the country’s development and brings value to the society. Plus, private sector gets new job during the construction phase and enjoys the benefit of its investment during the operation phase.
In Iran, PPP contracts have been used during last years. Many infrastructure projects in transportation, power, and lately in water sectors have been constructed using PPP delivery method. Despite many successful experiences in the past, there are still problems in... 

With the environmental concerns and scarce supply of the crude oil, a revival in the development of bio-based and compostable materials is coming. They are in general being called the ''green'' materials, among which poly(lactic acid) (PLA) got the most extensive attention due to its good combined properties, including the renewable feedstock, the compostability, and its good mechanical properties, especially the young's modulus and stiffness. PLA has found numerous applications. It is considered having the highest potential to replace some regular petroleum based plastics. However PLA has its own shortcomings, its brittleness, low heat distortion temperature and relatively high cost witch...