Sharif Digital Repository

As a promising solution for future indoor access networks, resource allocation in Visible light communication or LiFi networks is subject to lots of researches. An interesting approach for network algorithm design is to use some knowledge about the future of the network. With this regards, the anticipatory design may improve the performance of the system in terms of delay and throughput. This paper reviews the state-of-the-art anticipatory algorithms proposed in the literature, given different prediction capabilities. The key element that all of these algorithms share is to find an event that correlates the current actions to the performance of the network in the future. Apart from the... 

Visible light communication (VLC) uses LED lights for simultaneous illumination and data transmission. The throughput of a VLC network is highly dependent on the location of VLC access points (AP). In this paper, we propose a novel optimization framework for approximately optimal VLC AP placement which takes into account the stationary distribution of users for the first time. This distribution is the result of the mobility pattern of users in an indoor environment. The proposed method is independent of the resource allocation algorithm and eliminates the need for exhaustive simulations to find the optimal location for VLC APs. Simulation results show a significant improvement in the... 

In this paper, a new approach toward the optimization of Access Point (AP) placement in cellular Visible light Communication (VLC) networks is proposed based on the projected gradient algorithm. The objective of the optimal placement problem is to maximize the average throughput of the network subject to constraints on the minimum illumination level and the minimum rate of the users. This optimization framework gives the enhanced AP deployment in case of users with static, nomadic, or completely mobile behavior. Taking the distribution of users, the receiver's field of view, reflection from walls and interference from neighboring APs into account makes the deployment problem complicated. To... 

Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. This paper introduces the problem of mobility-aware optimization of resources in VLC networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of users. Due to the stationary nature of... 

In this letter, we investigate the fundamental limits of energy efficiency in Visible Light Communication (VLC) systems, which rely on Light Emitting Diodes (LEDs) for both illumination and communication. Despite their promise for indoor wireless communications, VLC systems face challenges due to increased energy consumption compared to illumination-only systems. Our analysis focuses on the electrical behavior of key components in VLC transmitter circuits to address this issue. We introduce the problem of capacity per unit cost in optical intensity channels, aiming to maximize information transmission while minimizing power consumption. Lower and upper bounds for energy efficiency are... 

The long-term performance of LiFi networks significantly depends on the location of access points. The optimized placement can be determined based on the distribution of users in the room. In this paper, we investigate the placement optimization for average throughput maximization in the presence of asymmetric distributions. In particular, we represent users' distribution in the indoor environment by the Gaussian mixture model, which is powerful and computationally convenient. Then we obtain the optimized deployment for different scenarios using gradient ascent algorithm. The results show that optimization of deployment significantly improves the average throughput of the network. As the... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite... 

Machine-to-Machine (M2M) communication is an important type of communication in the Internet-of-Things (IoT). How to send data in these high-density communications using relay selection can help improve the performance of this type of communication in various applications. In addition, the possibility of simultaneous use of different Radio Frequency (RF) interfaces helps to use the spectrum more efficiently. In this work, we try to further use machine communication RF equipment and improve the average data rate of networks in some applications such as the IoT, which have their own bandwidth requirements. Therefore, we provide an optimization algorithm for relay selection as well as the... 

The development of new technologies has confronted the entire domain of science and industry with issues of big data's scalability as well as its integration with the purpose of forecasting analytics in its life cycle. In predictive analytics, the forecast of near-future and recent past - or in other words, the now-casting - is the continuous study of real-time events and constantly updated where it considers eventuality. So, it is necessary to consider the highly data-driven technologies and to use new methods of analysis, like machine learning and visualization tools, with the ability of interaction and connection to different data resources with varieties of data regarding the type of big... 

Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have... 

Norouzak oil seeds that are the source of bio-diesel (Norouzak) fuel grow mostly in Gonabad and Kashmar located in Khorasan, north east of Iran. Spray characteristics of Norouzak bio-diesel have been experimentally and theoretically studied in this work. Norouzak fuel is added to the conventional diesel fuel, and mixture formations of several blends have been investigated and compared with each other. Moreover, by varying ambient and injection conditions, behaviors of spray of different blends have been explored. Microscopic and macroscopic properties of spray such as Sauter Mean Diameter (SMD), Ohnesorge number, spray tip penetration, spray cone angle, spray projected area and volume have...