Sharif Digital Repository

Recently, bonded composite patch repair, because of its significant advantages over traditional methods, has been highly accepted in several industries, particularly in aerospace applications. In this paper, a multi-scale finite element algorithm is proposed to simulate crack growth of repaired plates under fatigue load by considering the effects of composite micro-scale properties. The algorithm is verified through conducting an experimental set up and the proposed model is in reasonable agreement with experiments. The influences of different fiber volume fractions (VF), number of layers and fiber orientation of composite patch on the fatigue responses of adhesively bonded patch are... 

Recently, bonded composite patch repair, because of its significant advantages over traditional methods, has been highly accepted in several industries, particularly in aerospace applications. In this paper, a multi-scale finite element algorithm is proposed to simulate crack growth of repaired plates under fatigue load by considering the effects of composite micro-scale properties. The algorithm is verified through conducting an experimental set up and the proposed model is in reasonable agreement with experiments. The influences of different fiber volume fractions (VF), number of layers and fiber orientation of composite patch on the fatigue responses of adhesively bonded patch are... 

In feed forward neural networks, hidden layer neurons' saturation conditions, which are the cause of flat spots on the error surface, is one of the main disadvantages of any conventional gradient descent learning algorithm. In this paper, we propose a novel complementary scheme for the learning based on a suitable combination of anti saturated hidden neurons learning process and accelerating methods like the momentum term and the parallel tangent technique. In our proposed method, a normalized saturation criterion (NSC) of hidden neurons, which is introduced in this paper, is monitored during learning process. When the NSC is higher than a specified threshold, it means that the algorithm... 

Power factor correction (PFC) converter circuits are non-linear system due to the contribution of their multiplier. This non-linearity reflects the difficulty of analysis and design. Models that reduce the system to a linear system involve considerable approximation, and produce results that are susceptible to instability problems. Our goal is to design a controller that achieves some performance specifications despite these uncertainties in modeling. This paper addresses a robust H∞ control problem for switched circuits with parameter uncertainties. The necessary and sufficient conditions for existence of strong robust H∞ dynamic compensators and static output feedback controllers are... 

In this study, a numerical study on failure assessment and stress distribution on the adhesive region in a composite T-joint under bending load case is investigated using cohesive zone method (CZM). The Finite Element Model (FEM) has been verified with experimental results. To study the load transfer capability of the T-joint, five different adhesives are considered in the adhesive region and the effect of geometrical parameters such as stringer thickness, corner radius, and adherend thickness as well as micromechanical properties of reinforced fiber composite adherends are investigated. Effective properties of two composite adherends including Carbon-Epoxy (IM7/8552) and Glass-Epoxy... 

In this paper, a unified hybrid vector control of vector modulated VIENNA I rectifier is presented. Feedback linearization technique is used for the DC-link voltage control. For this purpose, at first a mathematical model of the VIENNA I rectifier is derived. Using this model, it is shown that the dynamic of the rectifier falls into two categories; linear inner dynamic which consists of inner current control and neutral-point potential control and nonlinear outer dynamic which consists of the DC-link voltage control. Based on these facts, a hybrid vector control scheme meaning linear vector control of inner dynamics and nonlinear vector control of outer dynamic is devised. Simulations... 

Abstract Multiple Description Coding (MDC) is a technique where multiple streams from a video source are generated, each individually decodable and mutually refinable. MDC is a promising solution to overcome packet loss in video transmission over noisy channels, particularly for real-time applications in which retransmission of lost information is not practical. The error resiliency feature of MDC is achieved at the cost of redundancy, and the required amount of redundancy for each frame depends on the packet loss ratio and also the importance of the frame in the sequence. Due to the error propagation in video transmission over lossy channels, reference frames of a Group of Pictures (GOP)... 

Background and objective: The human lungs exchange air with the external environment via the conducting airways. The application of an anatomically accurate model of the conducting airways can be helpful for simulating gas exchange and fluid distribution throughout the bronchial tree in the lung. Methods: In the current study, Lindenmayer system (L-system) has been formulated to generate the bronchial tree structure in a human lung. It has been considered that the structure of the bronchial tree is divided into two main segments: 1) The central airways (from the trachea to segmental bronchi) and 2) the dichotomous structure (from segmental bronchi to terminal bronchioles). Two sets of... 

Agent-oriented software methodologies have found their way to become one of the most important issues of software development. The diversity of existing methodologies and the variety of newly arriving ones have arisen the question of which methodology is best in the context of a special problem, so the need for evaluating and comparing methodologies is becoming more important everyday. On the other hand evaluating methodologies can reveal their strengths and shortcomings which lead to an improvement in development of the next generation of agent-oriented methodologies. In this paper, we are going to introduce an approach for evaluating methodologies via the evaluation of their lifecycle... 

In this paper, maximum likelihood step-change point estimators of the location parameter, the out-of-control sample and the out-of-control stage are developed for auto-correlated multistage processes. To do this, the multistage process and the concept of change detection are first discussed. Then, a time-series model of the process is presented. Assuming step changes in the location parameter of the process, next, the likelihood functions of different samples before and after receiving out-of-control signal from an X-bar control chart were derived under different conditions. The maximum likelihood estimators were then obtained by maximizing the likelihood functions. Finally, the accuracy and... 

This paper presents the design and part-load operation of a molten carbonate-micro gas turbine (MCFC/MGT) hybrid system (HS), and proposes a multiloop control strategy for the HS. A mathematical model of the system is introduced. Then, the structure of process is changed and the performance of HSs at part-load operation is studied. The novelty includes utilizing some part of the main fuel instead of auxiliary fuel in the combustion stage. The results show that the new configuration has more efficiency (about 63%). In order to keep the operating system within safe limits, variables of the control system are determined. Those controlled variables are as follows: stack temperature, fuel... 

Due to several advantages, three-phase Dual Active Bridge (DAB) converter is widely used in numerous applications nowadays. On the other hand, this converter is very vulnerable to Transistor Open-Circuit Fault (TOCF). Therefore, a fault-tolerant (FT) scheme has been proposed in this paper to solve the problem. First, normal and faulty conditions are investigated, and according to the results, a fault-diagnosis (FD) approach is introduced. Using the outcomes of FD unit, a new post-fault strategy is proposed for the converter. The FD method is based on the DC component of transformer phase currents, and the basis of FT technique is shedding the faulty phase. Some benefits of the proposed... 

A new dibenzothiophene (DBT) desulfurizing bacterium was isolated from oil-contaminated soils in Iran. HPLC analysis and PCR-based detection of the presence of the DBT desulfurization genes (dszA, dszB and dszC) indicate that this strain converts DBT to 2-hydroxybiphenyl (2-HBP) via the 4S pathway. The strain, identified as Rhodococcus erythropolis SHT87, can utilize DBT, dibenzothiophene sulfone, thiophene, 2-methylthiophene and dimethylsulfoxide as a sole sulfur source for growth at 30 °C. The maximum specific desulfurization activity of strain SHT87 resting cells in aqueous and biphasic organic-aqueous systems at 30 °C was determined to be 0.36 and 0.47 μmol 2-HBP min-1 (g dry cell)-1,...