Sharif Digital Repository

In this study, the main recovery mechanisms behind oil/water/gas interactions during the water-alternating-gas (WAG) injection process, in a network of matrix/fracture, were fundamentally investigated. A visual micromodel was utilized to provide insights into the potential applications of WAG process in fractured oil-wet media as well as the possibility of observing microscopic displacement behavior of fluids in the model. The model was made of an oil-wet facture/matrix network system, comprised of four matrix blocks surrounded with fractures. Different WAG injection scenarios, such as slug arrangements and the effects of fluid injection rates on oil recovery were studied. A new equation... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

A newly-designed surfactant was formulated to tolerate the harsh conditions of oil reservoirs, including high salinity of the formation brine and temperature. The specific emulsion and interfacial tension (IFT) behavior of this new surface active agent were investigated by performing emulsion stability tests, emulsion size analysis, and IFT behavior in the presence of four different types of alkalis. Image processing was utilized to analyze the droplet size distribution using microscopic images of the samples. The results show that depending on the composition of the mixtures, the optimum phase region and interfacial tension behavior change considerably. Solutions containing a higher... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

In this study, electrolytic plasma processing (EPP) was employed for surface nitrocarburizing of AISI 1020 steel in a urea electrolyte, where the substrate samples were connected cathodically to a high-voltage DC current power supply. The structural, mechanical, wear and corrosion properties of the samples treated for 3-5 min were investigated. The results show that the surface layers formed on the samples by this treatment at 220 V have a ferritic nitrocarburizing characteristic which consists of a compound layer and diffusion zone. The surface layers of the treated samples at 240 V consisted of a compound layer, martensitic layer and diffusion zone, respectively, which is a marker of... 

A proper vertex k-coloring of a graph G is called dynamic, if there is no vertex v∈V(G) with d(v)<2 and all of its neighbors have the same color. The smallest integer k such that G has a k-dynamic coloring is called the dynamic chromatic number of G and denoted by χ2(G). We say that v∈V(G) in a proper vertex coloring of G is a bad vertex if d(v)<2 and only one color appears in the neighbors of v. In this paper, we show that if G is a graph with the chromatic number at least 6, then there exists a proper vertex χ(G)-coloring of G such that the set of bad vertices of G is an independent set. Also, we provide some upper bounds for χ2(G)- χ(G) in terms of some parameters of the graph G  

A new-designed surfactant was prepared with capability of tolerating high saline formation water and real oil reservoir conditions. The specific emulsion behavior of this new chemical was investigated by doing all sets of emulsion stability and emulsion behavior tests in presence of different alkalis. Four types of alkalis (Sodium Hydroxide, Sodium Carbonate, Sodium Metaborate, and Triethanolamine) were mixed with the surfactant and their combined effect on aqueous-oil emulsion behavior was inspected. The experimental results shoine formation water and real oil reservoir conditions. The specific emulsion behavior of this new chemical was investigated by doing all sets of emulsion stability... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

The strength of a newly formulated surfactant with an alkali and polymer (AS/ASP) to improve an acidic heavy oil recovery was laboratory evaluated by various flooding experiments. The comparative role of the parameters like chemical nature, surface wettability, salinity, temperature and injection scheme were explored at high temperature and pressure on Berea sandstone rocks. According to the results the anionic surfactant is capable of providing proper oil displacement under high salinity conditions around 15 wt%. Continuous monitoring of differential pressure response and effluents’ state clearly represented the formation of an emulsified oil in high saline solutions with both alkali and... 

Lithium batteries have been widely used to power up implantable medical devices such as pacemakers that are often designed to treat, diagnose, and prevent different diseases. However, due to their limited capacity and lifetime, patients have to undergo a surgical procedure to replace the discharged battery. Recently, nanogenerators have been emerged and are broadly accepted since they can convert tiny biomechanical forces, such as heartbeats, into electrical energy. This study aims to manufacture a biocompatible and high-performance piezoelectric energy harvester (PEH) that is capable to be charged by the energy received from the heartbeat and store the generated voltage. In this research, a... 

The hot working behavior of A286 was studied using hot compression tests over temperature range of 950-1100 °C and at strain rates of 0.001-1 s -1. The flow curves of the material over the studied temperatures and strain rates were typical of dynamic recrystallization. However, some points reflected a change in the mechanism of softening with the change of strain rate. The relation between flow stress, deformation temperature and strain rate was examined via power-law, hyperbolic sine and exponential constitutive equations and the hyperbolic sine function was found more appropriate. The peak strain increased with strain rate up to 0.01 s-1 and then unexpectedly decreased at higher strain... 

Porous medium characteristics (e.g., pore geometry and medium heterogeneity) as well as the chemical nature of the co-solvents crucially affect the oil displacement efficiency during solvent flooding processes. In this work, initially saturated models with heavy crude oil were used to perform a series of solvent injection experiments. Several onequarter five-spot micromodels with pre-designed pore geometry were constructed and used. In addition, rock-look-alike flow patterns generated from thin sections of sandstone and dolomite reservoir rocks were etched onto glass plates to form micromodels mimicking the pore geometry and heterogeneity of these rocks. Four different groups of chemicals... 

The main issue in heavy oils enhanced recovery methods is to reduce their viscosity in order to get a better mobility. This is commonly obtained by blending the oil with light hydrocarbons. Co-solvents are good candidates to improve the hydrocarbon recovery efficiency especially in miscible processes. However, the effect of co-solvents on miscible flooding of heavy oil reservoirs at different pore geometries is not well understood. In this work different one-quarter five-spot network patterns along with those generated from reservoir rocks' thin sections were etches on glass surfaces. The models that had been initially saturated with the heavy crude oil were used to perform a series of... 

A 2-hued coloring of a graph G is a coloring such that, for every vertex v∈V(G) of degree at least 2, the neighbors of v receive at least two colors. The smallest integer k such that G has a 2-hued coloring with k colors is called the 2-hued chromatic number of G, and is denoted by χ2(G). In this paper, we will show that, if G is a regular graph, then χ2(G)-χ(G)≤2log 2(α(G))+3, and, if G is a graph and δ(G)<2, then χ2(G)-χ(G)≤1+4 Δ2δ-1⌉(1+log 2Δ(G)2Δ(G)-δ(G)(α(G))), and in the general case, if G is a graph, then χ2(G)-χ(G)≤2+min α′(G),α(G)+ω(G)2