Sharif Digital Repository

Studying the reliability of cracked structures under different types of failure modes such as a mixture of Mode I and Mode II loadings has been of great importance in many applications. The purpose of this study is to evaluate the effects of different modes of loading, i.e. pure Mode I, pure Mode II and Mixed mode I/II loadings on the reliability of cracked structures via three typical case studies including 1st: through crack in a very wide plate, 2nd: cracked pressurized fuselage and 3rd: cracked fastener holes under actual geometries and loading conditions using the FORM, the fracture toughness and the equivalent SIF for Mixed mode I/II loading which is extracted by the Energy release... 

The robots that can move on rough terrains are very important especially in Rescue operation, exploration, etc. In this research, a mechanism is introduced for a ring-like robot with a flexible body. This robot is moved by arms which are placed radially and have Reciprocating motion in this direction. By controlling the contraction and the extension of the arms which contact lhe ground, the robot will be forced to move which is called rolling-creeping motion. The robot is stable in stationary state.; also the maximum angle which it can be stable is determined. Considering the speed of contracted arm is the input parameter, the speed of the extended arm for locomotion of the robot has been... 

In this study, polypropylene/clay nanocomposites were prepared by melt blending method and their thermal conductivity and the thermal conductivity of polypropylene/multi-wall carbon nanotube (MWCNT) nanocomposites were investigated and modeled. It is found that the thermal conductivity of the PP/Clay and PP/MWCNT nanocomposites is increased with increasing temperature. The thermal conductivity of the nanocomposites is improved due to incorporation of nanoclay and MWCNT compared with pure PP matrix  

In this contribution a new approach to perform spatial integration is presented using a dielectric slab. Our approach is indeed based on the fact that the transmission coefficient of a simple dielectric slab at its mode excitation angle matches the Fourier-Green's function of first-order integration. Inspired by the mentioned dielectric-based integrator, we further demonstrate its graphene-based counterpart. The latter is not only reconfigurable but also highly miniaturized in contrast to the previously reported designs [Opt. Commun. 338, 457 (2015)]. Such integrators have the potential to be used in ultrafast analog computation and signal processing. © 2017 Optical Society of America  

Automatic cell segmentation has various applications in different parts of science. The development of automated methods for cell segmentation, remains challenging in situations where there are touching cells. In this paper we propose a new method for separating touching cells. As the first step, we use a combination of graph segmentation algorithm and thresholding for segmenting foreground objects and producing a binary image. Next, boundary points of separation zone are selected by using a corner detection algorithm. Finally, the marker controller watershed transform is applied to separate touching cells at selected points. © 2008 IEEE  

Stable control of water level of drum is of great importance for economic operation of power plant steam generator systems. In this paper, a linear model of the boiler unit with time varying parameters is used for simulation. Two transfer functions between drum water level (output variable) and feed-water and steam mass rates (input variables) are considered. Variation of model parameters may be arisen from disturbances affecting water level of drum, model uncertainties and parameter mismatch due to the variant operating conditions. To achieve a perfect tracking of the desired drum water level, two sliding mode controllers are designed separately. Results show that the designed controllers... 

Simulating signal transduction in cellular signaling networks provides predictions of network dynamics by quantifying the changes in concentration and activity-level of the individual proteins. Since numerical values of kinetic parameters might be difficult to obtain, it is imperative to develop non-parametric approaches that combine the connectivity of a network with the response of individual proteins to signals which travel through the network. The activity levels of signaling proteins computed through existing non-parametric modeling tools do not show significant correlations with the observed values in experimental results. In this work we developed a non-parametric computational... 

A signaling pathway is a sequence of proteins and passenger molecules that transmits information from the cell surface to target molecules. Understanding signal transduction process requires detailed description of the involved pathways. Several methods and tools resolved this problem by incorporating genomic and proteomic data. However, the difficulty of obtaining prior knowledge of complex signaling networks limited the applicability of these tools. In this study, based on the simulation of signal flow in signaling network, we introduce a method for determining dominant pathways and signal response to stimulations. The model uses topology-weighted transit compartment approach and comprises... 

One of the main applications of citation is to find articles that are relevant to a particular article. However, not all citations are equally relevant to the target article. This paper presents an approach to identify the most relevant citation(s). To this end, the Normalized Similarity Index (NSI) is proposed to quantify the similarity between the source and target of a citation base on the co-citations and references shared by them. To validate the method, NSI was calculated for five citation networks and was compared with the peer review grades for the relevancy between the source and the target articles. The results showed a significant correlation between the NSI ranks and those of... 

In this paper, we analyze the performance of code acquisition system in atmospheric optical code division multiple access (OCDMA) communications using optical orthogonal codes. Memory introduced by temporal correlation of optical fading process precludes us from using the Markov chain model for a code acquisition analysis. By considering this issue, we discuss how to extend the applicability of the Markov chain model to the atmospheric OCDMA communications. We analyze and compare the performance of correlator and chip level detector (CLD) structures in the acquisition system. In our analysis, we consider the effects of free space optical channel impairments, multiple access interference, and... 

The use of Computer Science in order to categorize and store information, improve diagnostic and therapeutic procedures, patient education and the training of a skilled labor force, has taken important steps and there are constantly new developments in this area  

Tape mechanisms must be able to transport the tape with a constant velocity for achieving high rate of data transfer. In this paper, a multivariable model of tape transport mechanism including the take-up and supply reel servos for tape tension control and capstan servo for speed control is considered. To achieve desired performance,pole-placement approach based on general canonical control form (GCCF) is used. Instead of using expensive tension sensors, an observer is designed. A regulator system is developed for disturbance rejection; and a modified integral control is designed for perfect tracking of desired setpoints in tape speed and tensions. Since the real dynamic model associates... 

Stimuli responsive hydrogels (SRHs) are smart materials with reversible changes in their properties through the environmental stimulus variations. Although SRHs have been used in various medical applications such as sensors, drug release systems and, etc., they are still being actively researched on other sectors such as functional textiles and smart clothing. One of the best methods to produce textiles with more functionality is smart finishing of textile by surface modifying stimuli responsive hydrogels. In this paper, literatures on SRHs applications, methods and application of some SRHs on textile have been thoroughly discussed  

Tape mechanisms must be able to transport the tape with a constant velocity for achieving high rate of data transfer. In this paper, a multivariable model of tape transport mechanism including the take-up and supply reel servos for tape tension control and capstan servo for speed control is considered. To achieve desired performance,pole-placement approach based on general canonical control form (GCCF) is used. Instead of using expensive tension sensors, an observer is designed. A regulator system is developed for disturbance rejection; and a modified integral control is designed for perfect tracking of desired setpoints in tape speed and tensions. Since the real dynamic model associates... 

Cotton fabrics have been prepared with smart properties by functional finishing with stimuli-responsive nano gel. A biopolymer (chitosan) and a synthetic polymer (poly-NiPAAm) have been used for the synthesis of nano gel through semi-batch surfactant-free dispersion polymerization (SB-SFDP) method. The incorporation of nano gel to textile fabrics is achieved by pad-dry-cure procedure, using an aqueous nano gel dispersion and 1,2,3,4-butantetracarboxylic acid as a crosslinking agent. With this cross linking method, it is possible to integrate the nano gel into the cotton fabric’s structure with good resistance to washing. The changes in physiological comfort parameters of cotton fabric such... 

Progressive use of Web based information retrieval systems such as general purpose search engines and dynamic nature of the Web make it necessary to continually maintain Web based information retrieval systems. Crawlers facilitate this process by following hyperlinks in Web pages to automatically download new and updated Web pages. Freshness (recency) is one of the important maintaining factors of Web search engine crawlers that takes weeks to months. Many large Web crawlers start from seed pages, fetch every links from them, and continually repeat this process without any policies that help them to better crawling and improving performance of those. We believe that data mining techniques... 

A new approach to perform analog optical differentiation is presented using half-wavelength slabs. First, a half-wavelength dielectric slab is used to design a first order differentiator. The latter works properly for both major polarizations, in contrast to our previously design based on Brewster effect (Youssefi et al., 2016). Inspired by the proposed dielectric differentiator, and by exploiting the unique features of graphene, we further design and demonstrate a reconfigurable and highly miniaturized differentiator using a half-wavelength plasmonic graphene film. To the best of our knowledge, our proposed graphene-based differentiator is even smaller than the most compact differentiator... 

To achieve a good performance of a boiler-turbine unit, dynamic variables such as steam pressure, water level of drum and electric output of turbine must be controlled. In this paper a nonlinear model of the boiler-turbine unit is considered in which the inputs are the valve positions of fuel flow, steam control, and feed-water flow. Using two control methods, feedback linearization and gain scheduling, a PI controller is designed. It is shown that by applying both methods, system goes from one operating point to another with an appropriate specification of time response. Results show that system with a controller designed based on gain scheduling method has a better time response from a... 

The abrupt development of technology has confronted different industries' managers with crucial decision points. The scope of their decisions' impact goes beyond their companies' borders. Sustainable assessment of technology investigates the economic, environmental, and social effects of technologies on firms and their environment. Nonetheless, the technology management process includes different steps (such as technology acquisition and exploitation) which need a comprehensive decision-making tool toward sustainable development targets. This paper aims to propose an integrated decision-making model to investigate the social sustainability of the technology management process. Considering...