Sharif Digital Repository

In this paper, Bat Algorithm is proposed to solve the Optimal Power Flow (OPF) problem. The approach employs a Meta heuristic optimization algorithm called bat optimization algorithm to determine the optimal settings of control variables of OPF problem. The performance of proposed method examined on the IEEE 9, 14, 30 and 57-buses test systems with fuel cost minimization as the objective function. The numerical results are compared to those of Particle Swarm Optimization (PSO), Harmony Search (HS) and Cuckoo algorithms. Simulation results obtained from the proposed approach demonstrate that this method provide effective and robust high-quality answer for the OPF problem. © 2016 IEEE  

The aim of this research is the optimisation of full-toroidal continuously variable transmission (CVT) in conjunction with the fixed ratio (FR) mechanism, while the optimisation objective is to minimise fuel consumption (FC) of the vehicle in the new European driving cycle. After the dynamic analysis of the power train, a computer model is developed to simulate contact between CVT elements and consequently calculate its efficiency. Then an algorithm is presented to calculate FC of the vehicle in the driving cycle. Then, an optimisation using particle swarm optimisation on the CVT geometry and FR mechanism (which is embedded between CVT and final drive) is carried out to minimise FC. It is... 

The objective of this research is geometrical and kinematical optimization of full-toroidal continuously variable transmission (CVT) in order to achieve high power transmission efficiency and low mass. At first, a dynamic analysis is performed for the system. A computer model is developed to simulate elastohydrodynamic (EHL) contact between disks and roller and consequently, calculate CVT efficiency. The validity of EHL model is investigated by comparing output of this model and experimental data. Geometrical parameters are obtained by means of Particle Swarm Optimization algorithm, while the optimization objective is to maximize CVT efficiency and minimize its mass. The algorithm is run for... 

Noise emission from vehicles in urban transportation has become of interest for researchers in addition to the engine exhaust gas emissions due to its significant effect on public health. In this work, an optimal energy management strategy is proposed for a hybrid electric vehicle (HEV) by taking the effect of engine noise into account. The engine noise is calculated based on a pressure-based combustion noise model at different operating points of a 1.5 L gasoline engine. The optimal operating points of the engine are defined using the calculated engine noise from in-cylinder pressure data and experimental data of brake specific fuel consumption (FC). A modification on the electric assist... 

One solution to reduce fuel consumption (FC) of vehicles is to use infinitely variable transmission (IVT) as the power train. However, inappropriate design of IVT leads to an inadequate decrease in the vehicle FC. Therefore, in order to reach a maximum fuel economy, an optimization on the power train proves to be necessary. The present article aims to optimize IVT to decrease the vehicle FC in a driving cycle. The results have revealed that the FC of the vehicle equipped with the optimized IVT is approximately 7% and 4.7% compared to the cases of using the optimized six-speed and nine-speed manual transmissions, respectively  

This paper aims to establish a control strategy for parallel hybrid electric vehicles equipped with full-toroidal Continuously Variable Transmission (CVT). First, the advantages of CVT are elucidated. Afterwards, a modified control strategy on the base of Baseline static Control Strategy (BCS) is proposed. Employing this strategy, in some moments, the engine operates in its fuel-optimal point to decrease the vehicle Fuel Consumption (FC). It is demonstrated that the modifications in BCS are applicable using a CVT as the power train. In order to investigate the implemented modification, an optimization on the proposed control strategy and BCS in SC03 driving cycle is accomplished and then,... 

Hybrid electric vehicles (HEVs) have been developed as a promising way to decrease the fuel consumption and emissions of conventional vehicles. Although the noise emission of HEVs is generally lower than that of conventional vehicles, it is still an issue, especially in urban transportation. In this paper, a power management strategy is developed to minimize the annoying noise of the engine for an HEV. This is a modified version of the strategy that was originally established based on the speed ratio of continuously variable transmission (CVT) as the control parameter (CVT-based strategy). The engine combustion noise is assessed using the experimental data of the in-cylinder pressure. Also,... 

Battery Electric Vehicles (BEVs) are a promising solution for reducing the impacts of passenger vehicles on the environment. However, their driving range is restricted due to the limitations of battery technologies. This range can be extended by adoption of multiple-speed transmissions. Most of the comparisons in the related studies are based on non-optimal designs or limited to modal driving cycles. Furthermore, the impact of Power-Split. Continuously Variable Transmission (PS-CVT) layout with type III power How on the power consumption of BEVs has never been examined. In this paper, single-, two-, and three-speed transmissions along with PS-C'VTs with type I and III power flows are... 

Battery Electric Vehicles (BEVs) are a promising solution for reducing the impacts of passenger vehicles on the environment. However, their driving range is restricted due to the limitations of battery technologies. This range can be extended by adoption of multiple-speed transmissions. Most of the comparisons in the related studies are based on non-optimal designs or limited to modal driving cycles. Furthermore, the impact of Power-Split. Continuously Variable Transmission (PS-CVT) layout with type III power How on the power consumption of BEVs has never been examined. In this paper, single-, two-, and three-speed transmissions along with PS-C'VTs with type I and III power flows are... 

The development of an efficient hybrid electric vehicle (HEV) platform needs an optimal design of its powertrain layout. This study is concerned with parallel HEVs (PHEVs) equipped with continuous transmission. First, different types of continuous transmissions, including continuously variable transmission (CVT), power-split CVT (PS-CVT) and multi-fixed ratio PS-CVT (MF-CVT), are discussed and their simulation models are presented. Also, various combinations of these continuous transmissions with PHEV configurations (namely, pre-transmission and posttransmission configurations) are introduced. Then, for a given PHEV model, several powertrain layouts resulting from combining the considered... 

Power management strategies play a key role in the design process of hybrid electric vehicles. Electric Assist Control Strategy (EACS) is one of the popular power management strategies for hybrid electric vehicles (HEVs). The present investigation proposes a new framework to advance the EACS. Dynamic Programming method is applied to an HEV model in several drive cycles, and as a result, some optimal operating regions are found. The obtained regions are almost distinct, and consequently, some threshold lines can be defined to separate them. The obtained threshold lines are used to eliminate some parameters of the EACS to reduce its sensitivity to the driving behavior. It is shown that by... 

The general goal of the facility layout problem is to arrange a given number of facilities to minimize the total cost associated with the known or projected interactions between them. One of the special classes of the facility layout problem is the Single Row Facility Layout Problem (SRFLP), which consists of finding an optimal linear placement of rectangular facilities with varying dimensions on a straight line. This paper first presents and proves a theorem to find the optimal solution of a special case of SRFLP. The results obtained by this theorem prove to be very useful in reducing the computational efforts when a new algorithm based on tabu search for the SRFLP is proposed in this... 

In this paper, we have discussed the results of sensitivity analysis in a payoff matrix of the Matching Pennies game. After representing the game as a LP model, the sensitivity analysis of the elements of the payoff matrix is presented. The game value and the optimal strategies for different values of parameters are determined and compared  

The electric assist control strategy is one of the well-known methods for managing the power sources of hybrid electric vehicles. Because of the dependence of the electric assist control strategy approach on its parameters, optimization of this strategy can improve its performance, which results in lower fuel consumption and lower emission levels. However, one of the main concerns about optimization of this strategy is its dependence on the driving behaviour. This paper aims to propose a new control strategy based on the electric assist control strategy with a smaller number of control parameters and less dependence on the driving behaviour. This strategy is usable only for vehicles equipped... 

The objective of this research is geometrical optimization of half toroidal Continuously Variable Transmission (CVT) in order to achieve high power transmission efficiency. The dynamic analysis of CVT is implemented and contact between the disk and the roller is modeled viaelastohydrodynamic (EHL) lubrication principles. Computer model is created using geometrical, thermal and kinetic parameters to determine the efficiency of CVT. Results are compared by other models to confirm the model validity. Geometrical parameters are obtained by means of Particle Swarm Optimization (PSO) algorithm, while the optimization objective is to maximize the power transmission efficiency. Optimization was... 

By locating a steel shear panel on the intersection point of the X-braces, concentrically or eccentrically braced shear panel (CBFSP or EBFSP) is formed. In this paper, to perform parametric study, 1-story CBFSP and EBFSP models with span length greater or less than height are considered. Using linear static analyses, the effects of size and location of the shear panel on the lateral stiffness of the frame with respect to the moment resisting frame with the same member sections are investigated. Next, for 1- And 3-story models, maximum displacement, along with base shear, and the ratio between the dissipated energy and input energy are examined under 4 ground motion records. Behavior of the...