Sharif Digital Repository

Stress sensitivity is a phenomenon that affects reservoir rock properties, such as permeability and therefore changes the well pressure transient behavior. This paper aims to study these behaviors in stress sensitive reservoirs and evaluate the pressure loss in such reservoirs during the process of hydrocarbon production. A power model is used to correlate the changes in permeability with pore pressure. A novel semi-implicit three-dimensional finite element method has been employed to numerically solve the flow problem. The numerical results have been validated by analytical results obtained in a non-sensitive reservoir. Pressure drawdown test for different scenarios has been studied. The... 

A sequential implicit numerical method based on discrete-fracture model and the Galerkin Finite Element method, for time-dependent coupled fluid flow and geomechanics problems in fractured subsurface formations is presented. Discrete-fracture model has been used to explicitly represent the fracture network inside porous media. The Galerkin Finite Element method with adaptive unstructured gridding is implemented to numerically solve the spatially three-dimensional and time-dependent problem. The presented method is validated with previously obtained solutions. Two problems are numerically solved by applying the presented methodology in a three-dimensional fractured petroleum reservoir under... 

This study presents experimental and analytical fatigue frameworks for the dynamic fatigue life prediction of nonlinear mechanical systems under hyperchaotic oscillations. Fatigue in aluminium notched beams under hyperchaotic/chaotic vibrations is studied using a time-based analytical model. The fatigue lives obtained by the analytical model provided satisfactory correlations with those acquired by the dynamic fatigue experiments conducted on cracked aluminium beams. The model is then used to study the fatigue under Duffing chaotic, Duffing hyperchaotic, and periodic dynamic forcing. Results indicate that the classic linear cumulative damage rule delivers inaccurate high cycle fatigue (HCF)... 

A new and fast method for the preparation of aminals is reported from the reaction of aromatic aldehydes and secondary amines in the presence of potassium carbonate in high yields. The aminal can be converted to the corresponding iminum salt in reaction with acetyl chloride very easily and in very short time with high yield. Addition of trialkylphosphite, as one possible nucleophile, to the prepared iminium salt produces the α-amino phosphonate in very high yield  

Open-pore titanium scaffolds were fabricated by sintering of compressed mixtures of TiH1.924 and urea. Spherical and irregular shaped space holders were used to investigate the effect of pore shape on cellular behavior. After removal of the space holder, the shape of the spacers was replicated to the pores. Average diameter of the pores was in the range of 300-600 lm. SEM images showed that titanium hydride resulted in higher surface roughness and larger micro porosities than pure titanium. In vitro evaluationswere carried out by using MTT assay, measuring alkaline phosphatase activity and alizarin red staining in flow perfusion bioreactor for cell culture. Observations revealed excellent... 

In most of countries, underground waters are the most important sources to provide drinking water. So it is necessary to make scheme and to do high protection of to achieve maximum beneficiary. Necessity of this management is going to be felt by developing these sources and human's interference. However, in the past overtopping phenomenon was the first reason of dam's destruction, but nowadays by increasing of spate design's period, the significant problem that researchers are interfere with, is seepage problem. The purpose of solving the underground problems is to procure height of water as a function of coordinate and time. In observation of practical industries, we can use the... 

Obtaining a deep knowledge about the bubbly flow systems, which are widely applied in various chemical and industrial processes, is crucial for scholars and engineers to achieve more accurate equipment design and processes control. This paper is dedicated to experimentally investigate the distinctly and concurrently effects of fumed silica nanoparticles (NPs) and hexane vapor molecules as impurities in continuous and discrete phases, respectively, on the terminal velocity and drag coefficient of a single rising bubble in aqueous solutions. The obtained experimental data were compared to the calculated data by derived correlations in literatures. As a result, none of those can predict the... 

Conventional lateral resisting systems can provide sufficient strength and ductility for design based earthquakes, although the considerable residual deformation remaining in the plasticized regions undermines the resiliency of the structures. In order to resolve this problem, various self-centering systems have been proposed and tested in recent years, most of which are specified for new buildings and are not simply suitable for retrofitting applications. Moreover, the available self-centering systems are costly and complex to assemble, which can be considered as a serious barrier for practical application. To address these drawbacks, an innovative Core-Less Self-Centering (CLSC) brace is... 

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to...